Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹15.0 LAccepted-Finance | ₹15.0 L | L 1 | Accepted-Finance OK |
| 2 | L 2₹15.0 LSame as L 1Accepted-Finance | ₹15.0 LSame as L 1 | L 2 | Accepted-Finance OK |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
14 Aug 2026, 10:00 amClosed
EXECUTIVE OFFICER
NAGAR PALIKA GOVINDGARH
1159/01
2026_DLB_585063_1
MBG/2026-27/1159
Open Tender
Civil Works
Percentage
365 days
NAGAR PALIKA GOVINDGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
MDRISL EXECUTIVE OFFICER
₹30,000
Yes
19 Aug 2026
9 Aug 2026
14 Aug 2026
9 Aug 2026
14 Aug 2026
9 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood)
shutter including chowkhats, architrave, holdfasts etc. complete and
stacking within 50 metres lead :Of area beyond 3 sq. metres | 18 | Nos | 244 | ₹4,392 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping
ground within 50 metres lead. | 50 | Nos | 33.9 | ₹1,695 |
| 3 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :
20mm thick . | 350 | Nos | 483 | ₹1,69,050 |
| 4 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 7 | Nos | 5,400 | ₹37,800 |
| 5 | P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. Size 600mm x 600mm | 150 | Nos | 1,672 | ₹2,50,800 |
| 6 | Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete | 150 | Nos | 204.5 | ₹30,675 |
| 7 | Wall painting with plastic emulsion paint of approved brand and
manufacture to give an even shade: Two or more coats on new work | 200 | Nos | 117.5 | ₹23,500 |
| 8 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 60 | Nos | 447 | ₹26,820 |
| 9 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).
Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 70 | Nos | 482.5 | ₹33,775 |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work | 100 | Nos | 114 | ₹11,400 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.96 MB
BOQ_1039282.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .