WBPWD/SSE/SWEC/NIQ23/2025-26

Amount

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/Havells/Polycab/RR Cable/Gloster) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

3 x 22/0.3 (1.5 sqmm)

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles

19 mm dia 3 mm thick polythene pipe without earth continuity wire

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable (Gloster / Havells / polycab)

2 core 6 sq. mm.

2core 10 sq. mm

4core 10 sq. mm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of one No.3/4 cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

S & F double compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable.

2 core 6 sq. mm.

2core 10 sq. mm

4core 10 sq. mm

Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials.

2 core 6 sq. mm.

2core 10 sq. mm

4core 10 sq. mm

S&F of 32/40 mm. dia.(as required) 1.5 Mts. long G.I. pipe (medium) arm bracket grouted by 4 nos. 5” long GI nut bolt & 2 nos. “U” clamp arrangement on wall.

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. 250 x 250 x 100mm

Supply of 12 mtr long ST pole (Model-410 SP-58).Overall length 12 mtrs & planting depth 2 mtrs.Length of section bottom-5.80mtr,middle-3.10 mtr and top 3.10 mtr long out side thickness of section bottom 165. 1x4.5 0 mm,middle-139. 7x4.5 0 mm and top 114.3x3.65 mm with base plate as per direction of EIC.Approx weight of pole-186 Kg. (Make-Calcutta Pole/Bansal/Subham pole/Utkarsh)

Supply of 7 Mtr. Octagonal Poles in 3mm shaft thickness with Top A/F 70 mm, Bottom A/F 130 mm , Base Plate 200x200x12 mm suitable for wind speed 180 Km/hr. as per IS:875 with suitable bracket arrangement to install 1 or 2 no. Led Steet Light. The pole shall be provided with factory-fitted pole-cap and suitable bracket/arrangement for fixing 230 V AC signalling/ warning light, including necessary holding clamp and support frame. A) Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 C) Galvanization as per BSEN ISO:1461 D) Make – Bajaj/ Valmont/ Transrail /Subham pole/Utkarsh

Supply of 4 Nos. M20X600/700 “J” Type foundation bolts as per EN-8 Grade (TS-600) manufactured from special steel along with nuts, washers, and templates for 7 Mtr. Pole

S& F of cicular type Ms structure ( 2.5 feet dia) made of 40mm dia GI pipe and 4 nos. support with 40x5 mm Ms flat including painting with necy holes , nuts,bolts etc to be fixed with pole cap to be fixed on pole top for fixing LED flood lights

Erection of Single Steel tubular pole of length above 9 mtr with sole plate etc. in CC foundation (Proportion 4:2:1 and dimension 0.6x0.6x1.7 mtr) having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. Above 9.0 mtr. Size 0.6x0.6x1.91 mts

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly Upto 9.0 mtr. Size 0.6x0.6x1.70 mts.

S&F 32 mm dia 3 mm thick polythene pipe from loop box to fitting at the time casting work of muffing as per

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

Upto 9.0 mtr. long pole

(i)One coat of red lead/Zinc chromate priming

(ii)1st coat of synthetic enamel paint over the primer

(iii)2nd coat of synthetic enamel paint over the 1st coat

Above 9.0 mtr. long pole

(i) One coat of red lead/Zinc chromate priming

(ii) 1st coat of synthetic enamel paint over the primer

(iii) 2nd coat of synthetic enamel paint over the 1st coat

Providing CC (6:3:1) muffing 450x450x600 mm in size or equivalent size of cylindrical muffing above ground level ,neatly cemented (3 mm thick)at the base pole(In lieu of CCmuffing) suitable for alkathene/polythene pipe as directed for street light wiring . Without loop box

Supply and Fixing LED flood light (150W)made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection.System efficiency min 110/LPW 10KV SPD included.(Crompton-TFS-507-150-57-60D-SL-GL-NSG/Phillips-BVP283 LED181 CW FG SY5WB 150W SPD V1/ Wipro-LF20-192-060-57-G2)

Supply and Fixing 40/45W LED Post Top Luminaires including supply & fixing of base plate or required soze to fixing if the light fittings (Make- Crompton, Cat no.LPTO-40-CDL-M/ Phillips-BGP200 LED45 CW PSU GR CPC SPD/ Wipro-LP07-501-XXX-57-CL)

Supply of highly efficient240V , 70W LED Street light with driver inside a PDC housing. Which: i) Fixture & Driver should be same make and BIS approved. [Make-Philips-BRP501 LED084 CW R3C PSU S1,/ Crompton- TRP-409-70-57-HL2-GL-NSG/Wipro-LR02-781-XXX-57-G3)

Supply & Fiixing of outdoor type LED SIGN Board i) 18'(L)x4'(B)x6''(W) fabricated from 3 mm thick ACP sheet on all six sides finished with approved metallic colour & suitable size hollow Al rectangular bar as frame inside the box. All LED Module, wiring to be fixed inside the ACP box. Silicon adhesives, SS screws to be used in such a way so that ingress of water can be restricted inside the box and maintenence / replacement of the LED modules can be done easily. All screws/nuts & bolts/clamps etc metals used inside the box should be of non-ferrous metal/Stainless steel.

Supply & Fixing of Special type of 3D Boxing type letter with top cover openable made from imported 3mm thick Acrylic sheet to accomodate LED module. Only front side of the letter should emit light. side to be made from opaque acrylic sheet. Letter height, width & depth of the letter will be proportionate & as per direction of E.I.C.. Suitable Ratio should be maintained between the letter size, spacing between each letters & spacing between each words as per the direction of the E.I.C. (Calculation of area (square inch) of a letter will be HeightXBreadth of the letter inclusive all wastage.

Supply & Fixing of LED within the acrylic letter from backside (Make: SAMSUNG-Korea) having the following specifications: COLOUR:WHITE or as per the choice of EIC. LIFE:70,000 burning hours. INTENSITY: Uniform without any bright/dark patches.VISIBILITY: 100Mtrs at least for normal eye vision.AMBIENT AIR: 0-50°C; 100% Relative Humidity.POWER CONSUMPTION: 1.5 Watt per module. (1 module consists of 3 nos LED)

SITC of water proof Power Supply unit to be fitted inside the Sign board box. inclusive of water tight gaskette fitted stainless steel hinged door box. Input: 100V-240V AC; 4A; 50Hz.Output: 12V DC; 17-20A constant power supply.(Make: Meanwell/Ven/Resang or equivalent)

Supply & Fixing MS Structure for holding i)10'(L)x4'(B)x3''(W) LED sign board by 65x65x6 angle as Vertical members & strut at back side and 50x50x6 angle and 25x6 MS flat as horizontal member including painting the MS structure and fixing with RCC foundation on the roof as per direction of the EIC.

Transpotatation charges of the above mentioned board frim work site to site, as directed by EIC.

Excavation of soil for installation of Earth Electrode and filling & ramming.

For Morrum Soil

Extra for treatment of soil by using salt & charcoal or coke for plate electrode.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

By TATA-Mediun GI Pipe

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 32 mm dia

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

SITC of Traffic signal light ( Red / Green / Yellow ) with controller & interconnectioin.

UPS & Power Back up

SITC of Battery bank including supply & fixing of MS/GI rack to store 8 nos battery along with interconnection cabling with required cable size for battery bank as well as UPS & power supply(to and from) Number of batteries-8,Battery capacity-12V &150 AH,Battery type-Tubular, Rated Battery Bank Voltage-96 VDC

Supplying &Fixing Industrial Plug & Socket board with 240V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SPMCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Supply & Delivery of fixed speed wall mounted type split air conditioners with rotary compressor having following major specifications 1. Rated Cooling at 100% Capacity : 5200 W or Higher 2. Rated Power Consumption at 100% capacity : 1450W or lower 3. ISEER Rating : 3.8 or Higher 4. BEE star Rating : 3 star or a standard Star rating satisfying the ISEER rating as per the manufacturer standards["Revisions in star rating shall be permissible, subject to a corresponding enhancement in the specified ISEER rating."] 5. Air-flow/IDU- : 500 CFM or Higher 6. Evaporator & Condenser Coil- Copper made 7. Refrigerent -R410A/R32(Green Refrigerant) 8. Capacity- 1.5 TR or Suitable capacity in TR satisfying the above specification. 9. Power Supply :220v, 50Hz,1Ph AC (with applicable tolarance) [Make-Fujitsu General (ASGA18 BUTA-B) / Mitshubishi Electric (MS/MU-AGZ18VF or equivalent model of Mitshubishi Heavy Industries]] (Price includes supply of IDU/ODU and complete set of installation kit (OEM make only) incl. 3 mtr. of interconnecting pipes,tubes, ECC

Supply & Delivery of fixed speed wall mounted type split airconditioners with rotary compressor having following major specifications 1. Rated Cooling at 100% Capacity : 6600W or Higher 2. Rated Power Consumption at 100% capacity : 1850W or lower 3. ISEER Rating : 3.8 or Higher 4. BEE star Rating : 3 star or a standard Star rating satisfying the ISEER rating as per the manufacturer standards["Revisions in star rating shall be permissible, subject to a corresponding enhancement in the specified ISEER rating."] 5. Air-flow/IDU- : 777 CFM or Higher 6. Evaporator & Condenser Coil- Copper made 7. Refrigerent -R410A/R32(Green Refrigerant) 8. Capacity- Suitable capacity in TR satisfying the above specification. 9. Power Supply :220v, 50Hz,1Ph AC (with applicable tolarance) (Mitsubishi Heavy Industries/ Mitsubishi Electric-MS/MU-AJZ24VF-KT/O-General-ASGA24BMAA-B (R32) or equivalent of Mitshubishi Heavy Industries) (Price includes supply of IDU/ODU and complete set of installation kit (OEM make only) incl. 3 mtr. of interconnecting pipes,tubes, ECC etc. as offered by manufacturer)

Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets (Make-Ryoku)

a) Liquid Line (1/4" OD with 0.6 mm thick)

b) Suction Line (5/8" OD with 0.7mm thick)

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube (Accoflex)

a) Liquid Line (1/4" OD with 0.6 mm thick)

b) Suction Line (5/8" OD with 0.7mm thick)

Control copper Cabling from Condensing Unit to control panel (Make: polycab/finolex/Havells)

a) 3 core 2.5 sq.mm communication cable

Installation,Commissioning and testing of 2.0/1.5 ton split type AC machine both indoor/outdoor including fixing of 40 x 40 x 5 mm MS angle iron frame and mending good the damages.

S & L of Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors.

a) 25 mm dia

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy.Connections

Charges for scaffolding arrangement incl. lifting for outdoor & indoor units

Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable (Gloster / Havells /Polycab)

4 core 35 sq. mm.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

S & F double compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable.

4 core 35 sq. mm.

Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials.

4 core 35 sq. mm.

SITC of DG set

Supply , delivery at site on foundation , commissioning of 40 -KVA, 415V, 50Hz, 3Ø silent new DG Set, comprising of Engine, alternator, separate AMF panel, Engine & alternator from the same manufacturer(Required authentic certificate),Base frame, Fuel tank, Battery, CPCB-IV+ approved Engine & Acoustic Enclosure [Make:- Jackson/Catterpiller/Greevs Cotton] having following pecifications :-

ENGINE:- Make: Cummins/CATTERPILLAR/Greevs Power. Engine Type : 4 Stroke Diesel Engine, RPM : 1500 Rated Output : 53.1 BHP or Higher, Duty : PRIME, Cooling : Coolant Cooled Cylinder : 3 INLINE, Aspiration : Turbo Charged after cooled. Type of Governer : Common rail electronic injection system or electronic. Fuel Tank Capacity : Minimum capacity 102 Liters Diesel Tank , with Inlet & outlet arrangement with Drain Plug and Air vents. Fuel Consumption at 75% rated Load with Radiator or Fan : 7.33 Ltr./ Hr. or Less Fuel Consumption at 100% rated Load with Radiator or Fan : 9.73 Ltr./ Hr. or Less Engine instrument Panel : Consisting of starting switch with Key, Lube Oil Indicator, water temperature Indicator, RPM indicator and hour meter. Safety Controls : Emergency Stop, Low Lube Oil Pressure warning/ Shutdown, High Engine Water Temp. warning/ Shutdown, Sensor failure Indicator, Engine overspeed indicator, Battery charging and low battery indicator. Exhaust Silencer : HOSPITAL GRADE TYPE Starting system : 12V, DC power srtarting system complete with starter motor, charging alternator with rectifier and Cutout as per manufacturer standard. LOAD :Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO 8528.Engine should not derate at 50 degree ambient temperature. Battery : 12 V X 1, Lead Acid, Low Maintenance or SMF and conforming to relevant IS Specification with Low/High Battery Voltage and Weak Battery warning

ALTERNATOR:- Make:Stamford / Leroy Somer/ Mecc alte Rating : 415 V., 3Ph. 50 Hz., 40 KVA, 32 KW, 1500 rpm. Type : Brushless, self excited and self regulated through an AVR. Insulation : Class High, RPM : 1500, Rated Current: 56 A Protection : screen-protected drip proof with Min.IP-23 degree of protection Voltage Regulation (max) : ±1%, Winding connection : Star with Neutral Total Distortion factor : Less than 3%, Power Factor : 0.8 pf (lag) Total Harmonic distortion in output waveform : < 5%

AMF PANEL:- Separate Cubical type floor mounted AMF panel made from 14/16 SWG Sheet Steel, duly pretreated, powder coated painted and aesthetically finished, suitable for controlling of 40 -KVA, 415V, 50Hz, 3Ø DG set having in built bypass arrangment as per manufacturer. Running time indications number of hours of operation and service intervals, service due indications The AMF panel must be designed to ensure trouble free performance and ensure switching over Electrical Load to DG within 15 (fifteen) second from the instant of mains failure.

ACOUSTIC ENCLOSURE The DG set should have integrated acoustic enclosure at the manufacturing state itself with 11 tank process. High quality acoustict enclosure must be certified as per CPCB-IV+ norms.Top lifting for easy handling at customer site & Silencer must be inside the enclosure. Sound Level : <75 dBA at 1 meter distance BASE FRAME:-Common iron channel fabricated base frame containing the engine and alternator, mounted on AVM pads and having provision for lifting Hook.

Supply & fixing of exhaust gas piping of suitable dia welded black dia MS class B pipe incl. all necessary bend supports and clamps anti vibration mounting insulation of exhaust system with 50mm thick mineral wool covered with wire mesh and aluminium cladding ( from DG sets to top of the building plus 3mtr or as per CPCB) for 40 KVA DG set as per direction of EIC. exhaust gas pipe dia as per suitable size.

Cost of Fuel (Diesel) for commissioning and testing of 40 KVA DG as per required and as per direction of EIC.

DG Foundation: Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required:(a) Depth of excavation not exceeding 1,500 mm

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with

Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety a) 1:3:6 proportion Foundation

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. b) River bazree

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor / upto (i) Tor steel/Mild Steel II) Other than SAIL/TATA/RINL

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. RCC BEAM

DG Shade Work:Galvanised Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J orL hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)(i) In Roof:-a) With 0.60 mm thick sheet

Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)A) 300 mm lapping each waya) With 0.60 mm sheet

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design,direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.For trusses spanning up to 12.00 m

M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). (ii) Grill weighing above 16 kg./sq.m.and above .

Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode (for soft soil / morrum soil) for 2 no Genarator Neutral earthing . the distance between two earthing should be twice of electrode length.(For DG Earthing)

Supplying & fixing Extra copper strip 25 mm x 6 mm from Copper earth electrode to Neutral point with required nos of nuts ,bolt washer for 40KVA DG for proper earthing of DG.

Earthing with 50 mm dia ISI-Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. By ISI-Midium G.I Pipe

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Supply of 50 ltr capacity fuel dram.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 50mm dia

Supply & Fixing of 12 core 2.5 sqmm unarmoured copper cable.( Make : Gloster/ Polycab)

DAS ENTERPRISE (BID ID -6893155)

SREE KRISHNA ELECTRICAL (BID ID -6892905)