CERTAIN REPLACEMENT OF PVC DOOR WOODEN DOOR WINDOWS VENTILATORS OTHER CONNECTED WORK IN NORTH AREA UNDER AGE BR I AT NASIRABAD

Amount

Taking down plaster on wall /ceiling of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in 1:4 on stone masonry wall surfaces finished even and fair complete all as specified & directed.

M&L for 15 mm thick rendering in 1:6 on stone masonary wall surfaces finished even and fair complete all as specified & directed.

M&L for 10mm thick rendering in cement mortar (1:4) on ceiling surfaces finished even and fair complete all as specified & directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound (washable) distemper over & including one coat of chalk whiting complete all as specified & directed.

M & L for preparation of newly plastered surfaces of wall and applying three coat of white wash, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.

M & L for preparation of newly plaster surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) & 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

All as per Sl item no 27.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set & jointed in neat slurry and pointed in white cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed Engineer-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site complete all as specified and directed.

M & L for rolled mild steel work angle iron (40x40x6mm) as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 (Gde E-165) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed

S & F plain, solid, straight chowkhats or frame of 2nd class hard wood Hollock/Bansum/Sal rebated on solid put together with pinned at joints complete all as specified and directed

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour sheet PVC Sheet reinforced with M.S square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S & F second class HW Hollock/Bansum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned & chemically pressure treated complete all as per specified and directed.

S & F second class HW Hollock/Bansum/Sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 1991 Part-I, section 8 clause Member shall be kiln seasoned & chemically pressure treated complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed. Note :- Cadmium screws to be used for fixing and fixtures.

Dismantling boarding of any description fixed with nails in any position and M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F continuous (piano) hinges mild steel bright finish or electrogalvanised of 30mm width of flaps (when open) complete all as spepcified and directed.

S & F in repairs steel window/ventilator factory made, made out of MS hollow section 79mmx39mmx1.6mm thick frame with double shutters (Glazed & wire gauge shutters) made out of 'Z' section using flush butt welding & tenon riveting all as per IS 1038 / 83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, 'Z' section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. NOTE :- Wire mesh and sheet glass shall be measured & paid separately under respective items.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

Taking out old unserviceable steel wire cloth & S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or stainless steel wire staple complete all as specified and directed

S & F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane complete all as specified and directed.

S & F figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick figured glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm complete all as specified and directed.

S&F extruded aluminum alloy anodised butt hinges, ISI marked of size 100 mm complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S & F aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S & F 300mm long aluminium alloy, anodised, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 125mm, single action springs hinges, mild steel with steel wire spring, stove enameled, black complete all as specified and directed.

Taking out old unserviceable butt hinges from door shutter and S&F butt hinges medium weight cold rolled mild steel ISI marked size 125 mm size complete all as specified and directed.

S & F in repair aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S&F in repairs aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S & F in repair 300mm long aluminium alloy, anodised, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M & L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F in repairs cast iron body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters upto 1.0 mtr in width complete all as specified and directed.

S&F in repairs 300 mm long helical rat tail door spring including roller & roller plate complete all as specified and directed.

M&L for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.

Taking down aluminium window/door for repair for necessary cutting, reviting, easing, drilling and replacement of hanging device and making then in serviceable condition and refixing in same opening and making good disturbed surfaces complete all as specified and directed.

Taking down steel window/gate for repair for necessary welding, reviting, easing, drilling and replacement of hinges and making then in serviceable condition and refixing in same opening and making good disturbed surfaces complete all as specified and directed.

Abdul Gani Abdul Sattar

M/s SUNIL ENTERPRISES

kirtiman traders

M/S JAGDISH PRASAD AIRUN

M/s Kishan Gopal Agarwal

GOMA CONSTRUCTIONS COMPANY

M/S SHIVA TRADERS