SITC of CCTV Camera Surveillance at Helipad including replacement of existing damaged wiring and fittings at Hut Bay under EandM Sub Division No-III APWD, Hut Bay, Little Andaman

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required

Supplying, Installation, Testing and Commissioning of BLDC Ceiling Fan (1200 mm), Sweep ISI Marked without regulator with all accessories etc as required, Make: Havells Model No. Efficiencia DX BLDC or its equivalent etc., as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying, Installation, Testing and Commissioning of CRCA housing Box Type Luminaries suitable for T8 LED Tube (1 x 18 / 20W) Make Bajaj Model No. BLRB-DB 118 or its equivalent etc., as required.

Supplying of 20W LED Tube Light with Poly Carbonate Housing designed for high Performance Make Bajaj: Model No. BLRB 20W LED or its equivalent etc., as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying of LED 9W Bulb Make Bajaj Cat No. ACE Saver or its equivalent etc., as required.

Supplying, Installation, Testing and Commissioning of 10W LED Bulk Head Make Bajaj WEE-PLUS Cat No. BIBWP 10W LED or its equivalent etc., as required.

Supplying and fixing of LED POST TOP LANTERN 25 Watt Make Bajaj Model No. BGCTN 25W, LED WH (ARIAN) or its equivalent etc., as required

Supplying, Installation, Testing and Commissioning of 20W LED Mirror Light Make Havells Model No. Austra LED Batten 20W 3000 K Order LHLDESAARANA020 or its equivalent etc., as required

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. a) 1 run of cable (4 Pair UTP CAT-1)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm

Supplying, Installation, Testing and Commissioning of 16 Channel NVR Synchronized @ of D1, 8 Channel @ 720P, 4 Channel @ 1080P / 3 MP, 2 Channel @ 5MP with 8 TB HDD. (Make: CP Plus) or its equivalent etc., as required

Supplying and Installation of IR Dome IP Camera 25/30 fps @ 1080P, 1/3" 2 Megapixel CMOS, 30m IR, ICR, 3.6 mm lens, IP 66 (Make: Dahua) or its equivalent etc., as required

Supplying and Installation of IR Bullet IP Camera 25/30 fps @ 1080 / 720P, 2 Megapixel CMOS, 30m IR, ICR, 3.6 mm Lens, IR Bullet IP66 (Make: CP Plus) or its equivalent etc., as required

Supplying, Installation, Testing and Commissioning of 16 Port POE Gigabyte Switch Make: DAHUA / HIKVISION/ CP PLUS or its equivalent etc., as required

Supplying and fixing of Wall mounted Network Rack standard 19" Rack x 4U for mounting NVR accessories (make: CP Plus) or its equivalent etc., as required

Supplying and fixing of 43" (108 cm) LED TV Full HD with wall mounting bracket / table top base and accessories for footage display as required. Model No.GL43FTL1CX/ L43FN2, LLODY/ AOC/ LG/SAMSUNG/ PANASONIC or its equivalent etc., as required

Supplying and fixing of 1500 VA, 12 Volt Pure since wave Inverter Make: Luminous/ Michotech/ Numeric or its equivalent etc., as required

Supplying of 12V, 200 AH Ah Lead Acid Battery for Inventor Make: Luminous / Amaron or its equivalent etc., as required

Supplying of Luminous Toll Tubular Trolley for fixing of Invertor Battery or its equivalent etc., as required

Supplying of the following sizes of XLPE insulated/ Heavy duty armoured Aluminium conductor UG Cable of 1.1 KV grade conforming to IS: 7098 (Part-I) and IS No. 1554 (Part-I) 1988 as applicable. Make: CCI/Gloster/Havells/ Polycab/ Finolex/ RR Kabel etc., as required. a) 10 Sq. mm x 2 Core

Supplying and laying of one number Double Walled Corrugated high density Polythlene pipe having corrugated on the outer wall and plain surface surface inner wall confirming to IS 14930 Part- I & II complete with necessary HDPE fitting for protection of 1.1 KV grade underground cable directly in ground at the depth of 50 cm i/c excitation and refilling the trench as required a) 40 mm Outer dia 32 mm Inner dia

Supplying and laying of one number Double Walled Corrugated high density Polythlene pipe having corrugated on the outer wall and plain surface surface inner wall confirming to IS 14930 Part- I & II complete with necessary HDPE fitting for protection of 1.1 KV grade underground cable directly on the surface or wall etc., as required. a) 40 mm Outer dia 32 mm Inner dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required a) Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required a) Single Pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) 40 A

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 8 Way , Double Door

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok) Note: Proof / Test Certificate should be enclosed)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and fixing of Sintex Make Junction Box Model No. GSJB - 1414 or its equivalent make having outside diamention 170 x 170 x 105 (Outer dia) thick hinged door and locking arrangement properly mounted on the existing entrance and exit gate with proper GI clamp or flat plate fitted 6A MCB SP and 63A rating modular 4 Way connector etc., as required as per the direction of the Engineer-In-Charge.