MC EW D ROB TO DEVELOPMENT OF A PUBLICATION CENTER AT THE MOUND KNOWN AS ULTA KHERA AT HASTINAPUR

ITEMS TO BE EXECUTED

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth in: 6.16.2 Cement mortar 1:6 (1 cement : 6 coarse sand) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m²

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 12.5.1 1.60 mm thick with zinc coating not less than 350 gm/m²

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : 12.24.1 Natural colour insulating board 12.24.1.1 12 mm thick

Providing and fixing of floor mat in PVC (poly vinyl chloride) including adhesive to fix with border around the wall as per design and approved by site incharge including all labour and material and trasnportaion.

Providing and fixing of fall ceiling in PVC (poly vinyl chloride) including pvc panels fitted on GI frame with PVC Corner Profile Soffit Panel, Parameter, Ceiling Intermediate Channel, Hanger, Ceiling Section as per design and approved by site incharge including all labour and material and trasnportaion

Providing and fixing of Toughened glass thickness 12MM fixed frame less on Brackets to maintain wind pressure and seal with silicone sealant.

Provision for providing and fixing of aproved brand Fs8400 Floor Spring Complete Set For Glass Door Including Lock. Material: Steel, Color: Silver Package Contents: 1-Piece Double Cylinder Floor Spring, One Top Fatch, One Bottom Fatch, One Top Pivot For Fatch And One Corner Patch Lock With Strike Plate Finish - SS Corner lock having dead bolt projection of 15mm (single throw) Patches having variable pivot point of 55 or 65mm Corner patch lock having three high security computer keys(Maximum door weight 80Kg and door width 950mm)or

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding fixing on MS pipe colour of approved shades made out of 4mm thick aluminium composite panel material inlcuiding material, structure design, fixing accesory with all labour and transportation to the site.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters

Extra for providing mechanical device chain and crank operation for operating rolling shutters.Exceeding 10.00 sqm and upto 16.80 sqm in the area

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter

Pvc Pipe [EACH

PVC Pipe Bend [RMT]

fan clip for ceiling [EACH]

FLUSH METAL BOXES 12M [EACH]

FLUSH METAL BOXES 8M [EACH]

FLUSH METAL BOXES 4M [EACH]

FLUSH METAL BOXES 2M [EACH]

FLUSH METAL BOXES 1M [EACH

Havells 12 M Cover Plate [EACH

Havells 8M H Cover Plate [EACH]

Havells 4M Cover Plate [EACH

Havells 2M Cover Plate [EACH

Havells 1M Cover Plate [EACH]

Suntech 12 Way SPN Metal White Double Door Distribution Board MCB Box [EACH]

PVC Insulated 6 mm Single Core Flexible Copper Wires & Cables polycab /comptaon/hevells [bundle]

PVC Insulated 1.5mm Single Core Flexible Copper Wires & Cables polycab /comptaon/hevells [bundle]

PVC Insulated 1 mm Single Core Flexible Copper Wires & Cables polycab /comptaon/hevells [bundle]

Polycarbonate Bulb Holder for Wall [EACH]

Havells Crabtree Athena 5 Step Fan Regulator - 2 Module [EACH]

Havells Crabtree Athena 6A Five Pin Socket [EACH]

Havells Crabtree Athena 6A One-Way Switch (White) [EACH]

Havells Crabtree Athena 6A-16A Three Pin Combined Shutter Socket [EACH]

Havells Crabtree Athena 16A One Way Switch with Indicator (White) [EACH]

Havells DHMGCDPF032 PVC Plastic 32A MCB DP C Curve (White) [EACH]

Havells 32A Single Pole MCB, Multi, Standard (HA-SPMCB32) [EACH]

Jaset Innovations Chipboard Screw with Saw Thread and Nylon Wood Dowel – White Zinc Plated – Flat Pozidriv Counter Sunk Head Assorted Small Sizes – Pack of 258 pcs [EACH]

Havells Ventil Air DX 200mm Exhaust Fan (White) [EACH]

Led Light ( watt / BulB/ Bulk [EACH]

LED Square fall Ceiling lights 18 watt 600x600MM [EACH

Havells Fan 3 Blades Ceiling Fan [EACH]

Labour charges [M2]

AKSHIT BUILDERS (BID ID -3162104)

Super Enterprises (BID ID -3162184)