Purchase of Generator Set for the department of HOD, VCC

Amount

Generator Set • Generator set of capacity 60-62.5 KVA based on filter technology • Power Genset Rating Prime Power, Genset Output (KVA/KW) 62.5/50 • Engine Type TCAC, No. of Cylinders/Cylinder arrangement 3/Inline, • Displacement (L) 3.66, Bore & Stroke (mm) 108x133, Compression ration 1.8, speed trip(rpm) 1650. • Engine Electrical system: 50HZ, Charging alternator Voltage/ Current (DC) 12V/35 Amps, Starter Motor rated voltage(DC) 12, Battery Voltage (DC)/Capacity (AH) 12V • Fuel System: Recommended Fuel HSD Fuel tank capacity (Ltr) 150 • Lubricating Oil system: Lub oil sump capacity 8.5 • Cooling System: Cooling system is designed for max ambient temp. Deg C at rated load 50, Radiator System Capacity, including engine, (L) 20 Ltr, Water a pump type Centrifugal, Gear Driven. • Alternator Specification: Type 4 pole, Rotating field, Exciter Type Brushless (Permanent magnet optional), coupling Flexible disc Close coupled engine, 3 cylinder, in-line, 4 stroke, rated at 1500 RPM. • Alternator: Compton Greaves (optional-Stamford/equivalent)-brushless alternator-Self-excited, self-regulated-Class *H’ insulation-Salient pole revolving field-Single bearing-Automatic voltage regulator • Control panel: Powder coated control panel manufactured with CRCA Sheet provides:- MCCB of suitable rating with short circuit protection-Controller Which displays voltage, current, KW, PF, Frequency, KWh- Indicating lamps for “Load On” and “Set Running” – Current transformers of suitable ratings- Copper Cables of suitable capacity with incoming and Outgoing terminations Control fuses duly wired and ferruled. • Power cables; Uninyvin copper conductor cables between Alternator & Control panel inside the canopy • Cooling System: Heater Kit for -20 Deg. C Operation/Heater Kit for -30 deg optional • AMF & Synchronizing System: AMF panel/AMF with Auto-synchronization. • Fuel System: Flexible Fuel Lines/ SS fuel lines/Fuel Pressure Gauge Enclosed Unit • The firm has to install generator FOR indenting department without any extra cost to buyer. It must include earthing solutions, building of platform (if required), connection to the electricity panel and other miscellaneous minimum requirements • Minimum 2 years Warranty and CAMC for up to minimum 3 years after completion of warranty to be included.