Special repairs to bldg. No P-13/02 to 03 and P-17/02 (Officer MD Accn) under GE (East) Jalandhar Cantt

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed.

Taking down chowkat or frame (without taking off shutter from the frame) not exc. 1.50 Sqm each, complete all as specified and as directed.

Taking down shutter of any description from the frame exc. 1.00 Sqm but not exc 2.00 Sqm each, complete all as specified and as directed.

Taking down chowkat or frame (without taking off shutter from the frame) exc. 1.50 Sqm but not exc 4.00 Sqm each, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed.

Dismantling stone slabs/tiles of any description or thickness in floors, aprons, etc. laid dry and pointed complete all as specified and as directed.

Dismantling timber fillet, rails, posts, rafter, purlins, etc. under 40 Sq cm in section in unframed work, complete all as specified and as directed.

Taking down cement plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc., complete all as specified and as directed.

Removing old lime wash (if any), hacking for key, raking out joints of old brick work built in cement mortar; not previously plastered and scrubbing down with water etc. to receive plaster, complete all as specified and directed.

M&L for brick work with sub-class ‘B’ Bricks (with old Size Bricks), straight or curved on plan exc. 6.0 metre mean radius, built in cement mortar 1:6, complete all as specified and as directed.

All as per description of serial item 11 above but except bricks complete all as specified.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in CM 1:4 complete all as specified.

S&F factory made flush shutters, 40mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side including 40x6 mm 2nd class HW lipping on edge complete all as specified & directed.

S & F factory made 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified and directed.

S&F factory made flush shutters, 25mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side incl 30X 6mm thick 2nd class HW lipping on edge, complete all as specified & directed.

S&F in repair 18/19mm thick MDF board, exterior grade, prelaminated on both side with decorative choice lamination, fixed with screws to timber frame work, including 18/19mm wide, 6mm thick 2nd class HW lipping on edges complete all as specified and directed.

S&F mild steel rollers and plate suitable for sliding drawers, complete all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish or electro galvanised., width of flaps 30mm (when open) complete all as specified and as directed.

S&F mortice lock, vertical type of size 65mm, 4 lever brass body, complete all as specified and directed.

S & F brass body ball catches with 8mm dia steel ball and striking plate including letting in complete all as specified and as directed.

S & F 75mm size brass handles, cast type, polished bright, fixed with brass screw, complete all as specified and directed.

S&F 2nd class hard wood plain fillets, square, rectangular or triangular in section clean sawn, sectional area exc 3 sqcm & n. exc 6 sqcm secured with nails or brads, completle all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per manufacturer's instruction complete all as specified and as directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Glass, wire cloth, grills & painting shall be measured & paid for separately.

All as per srl item No. 26 here in before but of gauged shutter. Note for item No. 26 & 27 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

S&F sheet glass, ordinary quality 4mm thick fixed with oil putty, size of glass not exc 0.50 sqm in each pane complete all as specified and directed.

S & F figured glass pin headed type, 4 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane complete all as specified and directed.

S & F in repair 25mm dia, stainless steel tubular curtain rail, complete all as specified and as directed.

S&F in repair, end Stopper, decorative type and fixing brackets for the drapery rod 25 mm dia. (One Set comprises of 2 No. of decorative type end stopper 2 No. of fixing brackets) complete all as specified and as directed.

S&F 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair of 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

S&F in repair 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 100mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F in repair 100mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F for 100mm size stainless steel butt hinges all as specified and directed.

S&F for 300mm mild steel ordinary rat tail pattern springs incl roller plate complete all as specified and directed.

S&F mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repair mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body & tongue of size140mm, anodised with hard drawn spring,fixed in door, complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body & tongue of size140mm, anodised with hard drawn spring, fixed in door, complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth complete all as specified and directed.

M & L for preparation of old painted surface of wooden and applying one coat of synthetic enamel paint of any description not otherwise described over 10 Cm width or girth complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

M&L for preparation of old painted surface of steel and applying one coat of synthetic enamel paint, complete all as specified and directed.

S & F in repair factory made built-in steel cup board with pressed steel frame of size 75 mm x 50 mm x 1.25mm thick with pressed steel shutter 1.25mm thick fixed to masonry wall by hold fasts, made out of 25x3mm flat iron including MS hanging rod of 10mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provn of MS peg set 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and as per manufacturer's instruction complete all as specified and directed.

M & L for non-skid ceramic colour tiles 400x400, 7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

M & L for coloured glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles over and including 10mm thick screed plaster in CM 1:4, complete all as specified and directed.

M&L for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in verticale surface as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and directed.

M&L for marble work 18 to 20mm thick of any shade other than white and black (table rubbed and polished) in steps, riser, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

M & L for PCC 1:2:4 type B-1, 100mm thick using 20mm graded aggregate as in floor/hardstanding finishing cement concrete surface even and smooth w/o using extra cement complete all as specified and directed.

M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture match with shade of granite and including screed bed/plaster layer 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on internal fair faces of brick walls or on concrete surfaces, finished fair and even, complete all as specified and as directed.

M&L for 15mm thick rendering in Cement Mortar 1:4 on External fair faces of brick walls or on concrete Surfaces plastered surfaces finished fair and even, complete all as specified and as directed

M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: The rate quoted by the contractor shall be included for scaffolding, welded mesh etc) (EIC shall ensure to get the complete work executed against this term before submission of completion)

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling, etc., plastered surfaces finished even and smooth, without using extra cement, complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of exterior acrylic emulsion paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surface of wall and applying two coats of exterior acrylic emulsion paint, complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall putty, all as specified & directed.

M&L for complete removal of existing treatment of old plastered surface of wall and applying two coats of acrylic washable distemper over a coat of 1mm average thick wall putty white cement base and making smooth finish, complete all as specified & directed.

M & L for preparation of old plastered Surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white Wash, complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and apply three coats of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces and apply one coat of white wash on walls including cornices etc all as specified and directed

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified of size 125x60mm complete all as specified and as directed by the Engineer-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified of size 165x60mm complete all as specified and as directed by the Engineer-in-Charge.

M&L for cement concrete 1:3:6, Type C-1 (20mm graded stone aggrgate) as in filling in steel frame/roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) all as specified.

M&L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and brushing with neat cement slurry with 3 kg of cement per sqm complete all as specified

Material and labour for cement concrete in foundations, filling and mass concrete 1:2:4 type C-0 using 12.5 mm graded stone aggregate as in roof padding complete all as specified and directed.

M&L for bitumen primer use in waterproofing and damp-proofing treatments @ the rate of 0.40 Litre / sqm, complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg per sqmcomplete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3Kg /sqm and minimum3 mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms /sqm ) laid on primed surface by forced application complete all as specified and directed.

M & L for 40mm thick brick tiles laid over and including 15 mm thick CM 1:6, and joints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight ofcement complete all as specified and directed.

All as per srl item No 79 above but except tiles complete all as specified and directed.

M&L flush pointing in CM 1:3 to brick tiles laid flat complete all as specified and directed

Demolition of cement concrete (unreinforced) exc 15 cm thickness above ground floors, complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC shall be measured separately)

Supply only integral water proofing compound conforming to IS-2645, complete all as sprcified and directed.

M&L for lean concrete (1:7:12) Type F2 laid compacted complete all as directed and specified

M&L for coved fillet in PCC 1:3:6 type C-1 using 20mm graded stone aggregate at junction of roof & parapet wall and other vertical surfaces 75mm radius and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed

Taking up or down Steel tubing 15mm bore (dia) and connections, segregating the serviceable pipes and connections, stacking properly at Site(s) and keep in safe custody for re-use, complete all as specified and as directed.

Taking up or down steel tubing 20mm bore (dia) and connections, segregating the serviceable pipes and connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

M&L for 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed

Refixing old steel tubing 15mm bore (dia) and connections in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of pipes by using wire brush including provision of new GI Connections, complete all as specified and as directed.

M&L 20mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing 20mm bore (dia) and connections in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of pipes by using wire brush including provision of new GI Connections, complete all as specified and as directed.

S&F in repair bib cock long nose (Foam Flow) with flange suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make : Prayag Cat No. 9806 or equivalent make as mentioned in Appx 'B'

S&F in repair 2 way bib cock double handle (Foam Flow) with flange suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make : Prayag Cat No. 9812 or equivalent make as mentioned in Appx 'B'

S&F in repair centre hole basin mixer with popup waste suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make: Prayag Cat No. PIS-50H or equivalent make as mentioned in Appx 'B'

S & F in repair single lever basin mixer with popup waste suitable for fixing to 15 mm bore GI pipe, complete all as specified and directed.Make: Prayag Cat No. 9451 or equivalent make as mentioned in Appx 'B'

S&F in repair concealed stop cock with adjustable wall flange suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make: Prayag Cat No. 9818 or equivalent make as mentioned in Appx 'B'

S&F in repair angular stop cock with wall flange (as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make: Prayag Cat No. 9810 or equivalent make as mentioned in Appx 'B'

S&F in repair wall mixer 3-in-1 with provision for both over head shower and hand shower complete with 115mm long bend pipe, connecting legs & wall flange suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make: Prayag Cat No. 9880 or equivalent make as mentioned in Appx 'B'

S&F in repair single lever sink mixer regular spout (Wall mounted) with connecting legs & wall flanges (as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make: Prayag Cat No. 9855 or equivalent make as mentioned in Appx 'B'

S&F in repair over head shower square 100mm wall shower (adjustable) of size 9'' x 9'' suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make: Prayag Cat No. BOS-33 or equivalent make as mentioned in Appx 'B'

S&F in repair hand shower with 1.50 metre flexible tube and hook, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make: Prayag Cat No. BHS-91S or equivalent make as mentioned in Appx 'B'

S&F in repair overhead shower with shower arm 225mm with wall flange and square rain shower 8" suitable for fixing to 15mm bore (dia) GI pipe, complete all as specified and as directed. Make: Prayag Cat No. BOS-49 and BOS-42 or equivalent make as mentioned in Appx 'B'

S&F in repair, SS foldable towel rack fixing with chromium plated brass screws and wooden/plastic cleats, complete as all specified and as directed. Make: Prayag Cat No. SS-1 or equivalent make as mentioned in Appx 'B'

S & F in repair brass towel rail, fixing with chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed. Make: Prayag Cat No. BA-80 or equivalent make as mentioned in Appx 'B'

S & F in repair hand shower (health faucet) with, 1.00 mtr long flexible tube & wall hook (as approved), suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed. Make: Prayag Cat No. BEA-41 or equivalent make as mentioned in Appx 'B'

S&F in repair jet spray with holder for EWC,1.5m long, suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed. Make: Prayag Cat No. BEA-17 or equivalent make as mentioned in Appx 'B'

S & F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S & F in repair new flexible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm dia complete all as specified and directed

S&F in repair, coloured PVC toilet cabinet of size 450x450x90mm with looking Mirror (as approved) fixing with chromium plated brass screws and wooden/plastic cleats, complete as all specified and as directed.

S&F in repair droplets looking mirror 900mm x 600mmx 6mm and fixed to wooden plugs with chormimum plated brass screws and cup washers including fixing arrangement complete all as specified & directed. Make: Prayag Cat No. BLM-03 or equivalent make as mentioned in Appx 'B'

S&F in repair, sheet glass shelf 500 x 125mm (with brass buckets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. Make: Prayag Cat No. BEA-45 or equivalent make as mentioned in Appx 'B'

S&F in repair corner glass shelf 300mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. Make: Prayag Cat No. BEA-46 or equivalent make as mentioned in Appx 'B'

S&F in repair soap dish holder and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. Make: Prayag Cat No. BA-05 or equivalent make as mentioned in Appx 'B'

S&F in repair toilet paper holder with flap and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. Make: Prayag Cat No. BA-88 or equivalent make as mentioned in Appx 'B'

S&F in repair EWC vitreous china white wash down water closet pan (Pedestal Pattern) with trap and fixing bolts including suitable seat cover, making Good to Floor /distrubed surfaces, complete all as specified and as directed. Make: Prayag Cat No. 4030 EWC 'S' trap or equivalent make as mentioned in Appx 'B'

S&F in repair, white plastic water closet seat and cover for water closet pan (pedestal pattern), closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.

S&F vitreous china white squatting pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral foot rests, ‘P’ or ‘S’ trap, providing Joints between flush pipe and socket of WC Pan including provision of lime concrete bedding and making good to floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed.

S&F in repair, flushing cistern duo flush of 10 litre capacity White colour, complete all as specified and as directed. Make: Prayag Cat No. 502 or equivalent make as mentioned in Appx 'B'

S&Fin repair under counter basin of size 560x410mmx180mm, oval type of any colour complete all as specified and directed. Make: Prayag Cat No. 4790 or equivalent make as mentioned in Appx 'B'

S&F in repair one piece wash basin with pedestal of size 565mmx430mmx845mm of any colour complete all as specified and as directed. Make: Prayag Cat No. 4603 or equivalent make as mentioned in Appx 'B'

S&F in repair, stainless steel sink with double bowl 1.00mm thick, overall size 1143x510x254mm and bowl size 510x254x254mm for kitchen or laboratory with plugs, washers, waste fitting 32mm bore (dia) of brass chromium plated, a pair of cast iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3, complete all as specified and as directed. Make: Prayag Cat No. 1250SD or equivalent make as mentioned in Appx 'B'

S&F in repair, stainless steel kitchen rack of size 31"x36"x10" with mild steel brackets and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. Make:Prayag Cat No. P-348 or equivalent make as mentioned in Appx 'B'

Disconnecting existing tanks exc 250 but n. exc 500ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed

S & F rotational moulded synthetic (HDPE), water storage tank 1000 litre capacity triple layer(cylinderical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, including dismantling of existing water tank, complete all as specified and as directed

S&F chromium plated grating 125 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed.

Dismantling of cast iron drain pipe of dia 75/100mm jointed with cement mortar/lead joint and taking out from wall/floor if reqd complete all as specified and as directed

S&F cast iron soil waste and vent pipes of size 100mm in any length with or without earts, with cement joints fixed in wall, complete all as specified and directed.

S&F cast iron soil waste and vent pipes of size 75mm in any length with or without earts, with cement joints fixed in floor, complete all as specified and directed.

S&F CI Bends (any radius),diminishing pieces or tapers 100 mm bore, complete all as specified and directed.

S&F CI Bends (any radius),diminishing pieces or tapers 75 mm bore, complete all as specified and directed.

S&F cast iron branch pipes, single (equal or un equal) ordinary or inverted (spigot or socket mtype) or with parallel branches for 100 mm bore pipe fitted with oval access doors, complete all as specified and directed.

S&F cast iron branch pipes, single (equal or unequal) ordinary or inverted (spigot or socket mtype) or with parallel branches for 75 mm bore pipe fitted with oval access doors complete all as specified and directed.

S&F cast iron cowls of 75 mm size, complete all as specified and directed.

Supply and fixed cast iron floor trap with grating including to waste pipe in run led joints for 75 mm fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110mm,setting and jointed with solvent cement, complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C2 using 40mm graded aggregate as in plinth protection/path complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and with pigment over and including 40mm thick sand cushionoing vibrated with mechanical vibrator complete all as specified and directed by Engr - in - Charge.

S&F in repair stainless steel pipe railing of 50mm dia metres in horizontal and 25mm dia stainless steel pipe in vertical at a distance of 60cm between step to step, all welded together, bend to shape as directed and fixing both ends in floor complete all as directed.

M&L for anodised frame for doors, windows, ventilator with one or more rebates, aluminium grill and U clips, including jointing cleat for fixing etc, complete all as specified and as directed.

S & F anodised aluminium window, fixed/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F in repair, one piece closet with integrated cistern with soft close, including suitable seat cover and twin flush fittings of any colour, complete all as specified and as directed. Make:Prayag Cat No. 4250 or equivalent make as mentioned in Appx 'B'

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point controlled by one way switch complete all as specified and directed.

All as per srl item No 143 here-in-before but one fan point controlled by one way switch complete all as specified and as directed

All as per srl item No 143 here-in-before but one socket point controlled by one independent switch board 3 pin 5 amp complete all as specified and as directed

All as per srl item No 143 here-in-before but one socket point controlled by one switch on same board 3 pin 5 amp with other switch complete all as specified and as directed

All as per srl item No 143 here-in-before but one call bell point controlled by one bell push complete all as specified and as directed

All as per srl item No 143 here-in-before but one light point controlled by two way switch complete all as specified and as directed

All as per srl item No 143 here-in-before but 3 pin, 15 amps switch socket outlet with 2.5 sqmm PVC insulated copper cable and 2.5 sqmm PVC insulated copper cable for continuous earth continuity conductor complete all as specified and as directed.

Supply and fix switch piano flush type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps, 230V AC, single pole, two way complete all as specified and directed.

Supply and fix switch piano flush type, 15 Amps, 230V AC, single pole, one way complete all as specified and directed.

Supply and fix socket outlet 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply and fix socket outlet 6 pin, 15 Amps, flush type complete all as specified and directed.

S & F ceilling rose surface type bakelite 65x50mm three terminal all as specified and directed

Supply and fix switch bell push flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed

Supply and fix call bell ding dong AC single phase 230 volts including wooden/PVC board of suitable size, connecting and testing complete all as specified and directed.

M & L for submain wiring of two single core 6 Sqmm PVC insulated copper FRLS drawn through and including 20mm dia PVC rigid concealed conduit and conduit accessories and 6 sqmm PVC insulated copper wire for continuous earth continuity conductor including taking down u/s submain wiring of any size complete all as directed by Engr-in-charge.Note : Two runs of 6 sqmm and one run of 6 sqmm including 25 mm dia PVC conduit shall be measured as one unit.

Supply & fix MCB, 16 amps 10 KA, SP complete all as specified and directed.

Supply & fix MCB, SPN 32 Amp 10 KA complete all as specified and directed.

Supply and fix in replacement deco ultra slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 18W/20W LED, 6000K with square decorative end caps complete all as specified and directed by engr-in-charge. Make: Havells cat part No. LHEXBXPNIN1W020 or equivalent to make as mentioned in Gp 1 of Appx 'B'

Supply and fix batten holder ISI marked insulated body complete all as specified and directed.

Supply and fix decorative wall mounting light fitting suitable for 15 watt LED lamp complete glass shade including 1 x 15 watt retrofit LED lamp complete all as specified. Make: Havells cat part No. LHDL03160099 or equivalent to make as mentioned in Gp 1 of Appx 'B'

Taking down and refixing ceiling fan of any sweep, painting of fans complete (as per previous colour) with synthetic enamel paint by spyaring including filling cavities with filler one coat after cleaning all dust etc including replacement of flexible wire, rubber reel, nuts, bolts complete all as specified.

S & F 5 step fan regulator, electronic type, single phase, heavy duty including connection complete after dismantling/removing unserviceable regulator complete all as specified and directed.

S & F exhaust fan metallic body, 300mm sweep, 900 RPM, single phase, 230 volt, heavy duty with lovered shutter including provision of three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washer, all as specified and directed all as specified and directed.

M&L for making opening for exhaust fan of size 300 mm dia by cutting of wall of any specification including finishing surface and rendering complete in cement mortar 1:4, 10mm thick including making good to all disturbed surfaces and matching the same with existing specifications complete all as specified and directed

Supply and fix sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 12 way SPN 230 volts complete all as specified and directed.

Supply and fix in repairs energy saving & environmental friendly long life versalite pressure die-cast aluminium luminaire with high power 25 watt 5700K LEDs building security lights as light source and high efficiency electronic driver BIS approved having ip 65 protection (Min) surge protection, power factor more than 0.95 complete pre-wired and product should be made in India including bracket made out of GI pipe 32mm dia bent to shape and clamp 40x6mm FI with nut bolts. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Material and labour for earthing complet with galvanised steel earth plate electrode 60cmx 60cmx 6.00 mm thick buried directly in ground (Earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected and including GI strip 32mm x 6mm by means of GI bolts, nuts, check nuts and washers, earth plate surrounded by packed alternate layers of coal dust and common salt 15cm thick, all around top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh and 50mm bore GI pipe light grade for protection of GI strip 32mmx6mm from top of earth plate upto test point (upto 7.5metre in length) connected with suitable size of GI nuts, bolts and washers all as shown in Electrical plate No. 3 of SSR Part-I, testing on completion including excavation/earth work in any type of soil/rock, PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways with suitable handle for lifting arrangement & including formwork and MS frame using MS angle iron 40x40x6mm complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

Supply and fixing 4 pole MCCB 63 Amp, 50 HZ, 415 V with rupturing capacity 15 KA, complete all as specified and directed.

Supply, installation and laying XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duly) of size 35 sqmm 3.1/2 core 1100 Volts grade with standed aliminum conductor complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Supply and filling for sand cushioning with a layer 8 cm thick before laying of cable and 15 cm thick aftyer laying of cable in trenches complete all as specified and directed. Note : Punned down thickness shall be measured

Supply and old size sub class ‘B’ bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed

Supply and fixing GI pipe ISI Marked of siz 80mm dia bore for cable protection under road/floor along the pole including fittings complete all as specified and directed.

KABEER CONSTRUCTIONS

JAGDISH SINGH AND CO

BINDU ENTERPRISES

LABH SINGH AND SONS

Barmotra Infrastructures

NATIONAL BUILDERS

NIRMAL SINGH

JAGDISH KUMAR SEHGAL