REPAIR TO JOINERY IN MD ACCN AT AF STN CHIMNEY HILLS UNDER AGE (I) AF CHIMNEY HILLS

Hacking out old broken glass ( any thicknes, size, qualityor description) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips and providing new ones complete.

S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete.

M&L in repair Drappery rod with Aluminium, tubular rail 20mm dia as in curtain rails, with fixing brackets, stops, rollers etc . Note brackets will be measured and paid seperately.

M&L for Aluminium anodised bracket powder coated or approved make for fixing droppery rod fixed in repairs

S&F in repairs MS peg stay 300mm long suitable for steel windows fixed with necessary Nut, bolt and washers fixed incl drilling/welding complete.

S&F in repairs mild steel handle any type or size suitable steel windows fixed with necessary nut, bolts and washers fixed incl drilling/welding complete.

S&F in repairs Butt hinges 100mm size, medium weight, cold rolled mild steel, if reqd welding reqired at site rate shall be included complete

S&F in repairs, Butt hinges 75mm size, medium weight, cold rolled mild steel, if reqd welding reqired at site rate shall be included complete.

S&F in repairs Mild steel barrel tower bolts 150mm complete.

S&F in repairs, Mild steel barrel tower bolts 200mm complete.

S&F in repairs Mild steel pressed handles 150mm complete.

S&F in repairs Aluminium anodised, barrel tower bolts extruded section 150mm complete.

S&F in repairs, Aluminium anodised, barrel tower bolts extruded section 200mm complete.

S&F in repairs Aluminium handle handles cast type 150mm complete.

S&F in repairs 300mm long Mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and inclduing a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm complete.

S&F in repairs GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with screws or GI staples in steel windows/wooden doors complete all as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples steel windows/wooden doors complete all as directed.

S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete .

M&L for taking down wooden shutters of any description exc 1.0 sqm and n exc 2.0 sqm and refixing in the same opening after easing and adjusting and necessary repairs complete.

Taking down wooden shutters of any description exc 1.00 Sqm and n. exc 2.00 sqm complete.

Taking down chowkhats or frames with shutters of size n exc. 1.5 Sqm and removing from site(without taking off shutters from the frames) complete.

Taking down chowkhats or frames with shutters of size exc. 1.5 Sqm but not exc 4 sqm each and removing from site(without taking off shutters from the frames) complete.

S&F 105 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed complete.

M&L 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and directed by Engineer-in-Charge.

S&F 35mm thick flush shutters, solid core construction, with block core and plywood face panels, commercial type on both sides, fixed to chowkats complete

S&F 2nd class hard wood, 35mm thk glazed/ skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/guaze etc edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass/ guaze.complete. Note : glazing/gauzing will be measured seperately

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in hold fast, backing filling,bed block and like complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete (Pattern, shape & colour approved by AGE(I)) all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelaminated colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC colour sheet , stile and rails feathered edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelaminated PVC colour sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete (Pattern, shape & colour approved by AGE(I)) all as specified and directed.

S&F steel window with side hung shutters incl box type hinges, with steel handle and steel peg stay complete with glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer complete.

S&F steel window with side hung shutters incl box type hinges, with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete.

S&F steel window with centre hung shutters incl box type hinges, with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete.

S&F MS framed work such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete.

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete.

M&L preparation of new wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete..

S&F aluminium anodized handles 150mm long complete

S&F 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete.

S&F floor door stopper of aluminum alloy body 140mm complete.

S&F aluminium anodized barrel tower bolts 150mm of extruded section complete.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel

S&F GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with screws or GI staples complete

M&L Welding in repairs n.exc 2.5cm in length, thickness of Metal to be welded exc 6mm but n.exc 9mm complete.

M&L running welding in repairs, thickness of Metal to be welded exc 6mm but n.exc 9mm complete.