Providing FHTC to 56 (0) number of households in 2 Habitation of THENKA ULIPPDY Village, GANGIMATA GP of Mangalore Tq in DK district by Augumentation & Retrofitting SVS (Balance Work)

Providing FHTC to 56 (0) number of households in 2 Habitation of THENKA ULIPPDY Village, GANGIMATA GP of Mangalore Tq in DK district by Augumentation & Retrofitting SVS (Balance Work)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

b)Bracings, including 60% formwork

c)Bottom ring beam, including 60% formwork

d)Bottom slab, including 50% formwork

e)Landing projection, including 50% formwork

f)side wall, including 70% formwork

g)Inside haunch

h)Top ring beam, including 60% formwork

i)Top slab after deduction of ventilator and inspection door, including 50% formwork

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners

wherever required smooth rendering, providing and removing s...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

Finishing walls with water proofing cement paint of required shade :New

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

thoroughly brooming the surface to remove all dirt, dust, ...

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

Providing and fixing MS ladder between landings, 45 cms wide using

angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre,

with necessary supports of same angle iron etc. as directed,...

Ladder inside the container: Providing anodized aluminium ladder

using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x

25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing and fixing 40mm dia. GI pipe medium duty pipes hand railing

3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and

100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...

Providing and fixing lightening arrestor with aluminium strip 25mm x

3mm size including finial and grounding, aluminium strip to be embeded

in one of the columns in and independent GI conduit of 40mm ...

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts etc....

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true

to line / hoisting of DI flanged pipe in position and aligning to correct

plumb, including cost of jointing materials, conveying...

Providing Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:100x90

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of

variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865

with the latest amendments and of grade GGG 40/50, shaft...

Printing new letter and figures of any shade with synthetic

enamel paint black or any other approved colour to give an

even shade per cm height per letter

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Cutting Asphalt /Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps includin...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specificati...

Earth work excavation for pipeline trenches by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width)trench width as per drawing and technical specifications, including setting o...

Providing, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Cutting Asphalt /Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps includin...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specificati...

Earth work excavation for pipeline trenches by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specifications, including setting...

Providing, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...