PROVISION OF WASH ROOM AND SEPTIC TANK FOR NCS AND AUGMENTATION OF EXTERNAL ELECTRIC AND WATER SUPPLY FOR BSF MINOR WORK AT ARAKKONAM

Amount

Surface excavation n exc 30 Cm deep and averaging 15 Cm deep and getting out in soft / loose soil complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150 mm complete all as specified and as directed.

Excavation in trenches, n exc 1.50 mtr wide and n exc 1.50 mtr in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.50 mtr in depth and getting out in soft / loose soil complete all as specified and as directed.

As per item no 04 but depth exc 1.5 m and n.exc 3.0m and getting out hard /dense soil complete all as specified and as directed.

Material and labour for Moorum/red bajri, filling in floors or pavings, laid in layers n.exc 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed.

Hard core of gauge n exc 63 mm broken stone or boulders deposited spread and levelled in layers n exc 15 Cm thick, watered and rammed to a true surface broken stone or boulders complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation,filling and mass concrete etc complete all as specified and as directed.

M&L for Joint free coloured Non-skid Ceramic tiles 7 to 8 mm thick in floors, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set & jointed in neat cement slurry and pointed in white or coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site to match complete all as specified & directed.

Material and labour Glazed ceramic coloured (Desiner) tiles 450X300X7mm thick,laid in pattern decided by Engr-in-charge, as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for precast cement concrete desiner chequered tiles of size 300mmx300mm x 22-25mm thick, machine pressed, factory made, set, jointed and pointed in neat cement slurry @ 3 Kg per Sqm with grey cement and pigment to match colour of tile,laid in floors,path,pavements etc and including 20 mm thick screed bedding in cement mortar (1:6) complete all as specified and directed. Note:- Colour and shade of tile will be approved by GE.

Matetial and labour for 40 mm thick cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate) as in damp proof course (DPC) etc complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection, in altranative bays including finished even and fair complete all as specified and as directed.

Removing excavated material exc. 250m but nexc 500 m and depositing where directed complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

M&L for brick work with subclass B old size bricks, straight or curved on plan exc 6.00 m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Supply only integral water proofing compound

Material and labour for rendering 5 mm thick in cement mortar 1:3 as in ceiling surfaces, finished fair and evenwithout using extra cement complete all as specified.

Material and labour for prepration of newly plastered surface of ceiling applying two coats of white wash complete all as specified .

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for prepration of newly plastered surfaces on walls and applying two coat of weather coat paint with priming coat of plastered surface complete all as specified .

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6 mixed with WPC finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for two coats of Oil emulsion distemper on newly plastered surface of wall with roller application including applying 3 mm thick Birla / JK Putty over a coat of primer surface complete all as specified and as directed.

Material and labour for mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slabs, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars complete all as specified.

Ditto as per item no 23 but 6mm to 8mm dia complete all as specified

Ditto as per item no 23 but 5mm dia and overup to and including 10mm dia in stirrups,spaces and binders complete all as specified

Material and labour for reinforced cement concrete(design mix) M-25 20mm graded stone aggregate for foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

Formwork to side of concrete foundation,footing,bases of column raft and raft beams, side and soffits (if any)of foundation and plinth beams and similar work;vertical or to batter fair flat finished surface of concrete conplete all as specified.

Material and labour for reinforced cement concrete(design mix) M-25 20mm graded stone aggregate for columns, pillars,piers,posts and struts complete all as specified and as directed.

Formwork to side of pillars,posts.struts,piers,column and stanchions finished surfaces of concrete square,rectangular or polygonal complete all as specified and as directed.

Material and labour for reinforced cement concrete (design mix) M-25 20mm graded stone aggregate for slab supported on walls,beams and columns in floors,roofs landings,balconies,canopies,deck slab sand in shelves and the like complete all as specified and as directed.

Material and labour for reinforced cement concrete (design mix) M-25 20mm graded stone aggregate for chajjas/roof projections mass concrete complete all as specified and as directed.

Material and labour for reinforced cement concrete (design mix) M-25, 20mm graded stone aggregate for beams / roof beam, cantilevers,bressumers,lintel over 1.5m span complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc fair finished of concrete complete all as specified and as directed.

M & L for preparation of roof surface by cleaning, removal of dirt, oil, grease etc and applying two coats of waterproofing membrane of Bostik Ultraseal PU @ 0.60 kg per for each coat (1.20 kg for two coats) to achieve dry film thickness of 1 mm over one coat of Bostik ultraseal PU primer @ 200 ml per sqm complete all as specified and as directed.

M & L for providing padding concrete PCC 1:2:4 type B0 (12.5 mm graded aggregate) as in roof over the water proofing membrane of Bostik

Supply and fix Pressed steel frames (factory made) made out of 1.25 mm thick MS steel for doors with one or more rebates including necessary fixing lugs, 100mm long Butt hinges, hold fast, lock strike plate, etc, complete,of size of frame 125x60mm including one shop coat of red oxide primer, filling of back of chowkat with PCC 1:2:4 type B1, including welding only of butt hinges etc complete all as specified.

Material and labour for two coats of synthetic enameled paint on steel and iron surface over 10 cm width or girth including preparation of new surface over a coat of red oxide primer complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters with particle board core 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated surfaces wooden surfaces of any description, over 10Cm width or girth including preparation of new wooden surfaces, complete all as specified and as directed.

Supply and fix 300 mm long Stainless steel sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and as directed .

S&F 75mm long medium weight stainless steel but hingescomplete all as specified and as directed.

S&F 125 mm long Medium weight Stainless steel handles complete all as specified and as directed.

S&F 150mm long stainless steel ,barrel tower bolts complete all as specified and as directed.

Supply and fix for steel work in tubular/ squre/rectangular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade st-240 (medium grade) complete all as specified and as directed.

Supply and fix powder coated anodised aluminium frame for doors ,windows , ventilators with one or more rebates mimimum thickness of powder coating 50 micron) including joining cleat for fixing etc,complete all as specified and as directed Notes : (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturers catalogue for the corresponding aluminium sections/fittings (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/supports into floors/walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets

Supply and fix powder coated anodised aluminium sliding or side hung type aluminium , window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as all locking arrangements peg stays 150 mm long (1 No), but hinges type B-21 100 mm long (2Nos) suitable handle (1 No) etc complete all as specified and as directed Note:Glass and other mtrls willbe Paid and measured separately.

Supply and fix powder coated anodized aluminium grill of 8mm x 8mm bars size of opening 10 cms size mesh with aluminium channel 'F' angle 20mm x 15mm aluminium frame work all as specified and as directed.

Supply and fix 4.0 mm thick sheet glass,ordinary quality quality on one side fixed in door/windows, nexc 0.5 Sqm in each pane fixed with stainless steel screws ,beads/glazing with oil putty etc complete all as specified and directed.

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples/beads complete allas specified and as directed by Engineer-in -charge.

M &L for 15 mm bore UPVC pipes of pressure rating 10kgf/cm2 fixed complete to wall and ceilings or laid in floors including all fittings complete all as specified.

M &L for 20mm bore UPVC pipes of pressure rating 10kgf/cm2 fixed complete to wall and ceilings or laid in floors including all fittings complete all as specified and as directed.

Supply & fixed rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, triple layered, marked embosed, hoisted and fixed in position including all fitting connecting up pipes complete all as specified and as directed.

S&F vitreous wash down water closet with integrated cistern ,seat cover and twin flush fittings pan S trap dual type (pedestal pattern) size 680x370x750mm and plastic water closet seat,black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed (Cat No:4230 of Prayag or equivalent make of Jaquar/Marc/Kohler/Johnson.)

Supply and fixed health faucet (hand shower) with 1.0 metre long tube with wall hook, chromium plated as per Cat No.BEA-41 of Prayag or Cat No.ALD-563 of Jaquar or O0426C of HR Johnson or T9961A1 of parryware or equivalent of KOHLER/MARC complete all as specified and as directed

Supplied and fixed water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) complete all as specified and as directed.

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and as directed.

Material and labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado ,etc laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and grinding , polishing ,including 1:4 of cement mortar 15mm thick sreed bedding complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Supply and fix Counter wash hand basin vitreous china, of size 560x410x180mm excluding taps, but including chain and pulg and procelain stopper waste fitting brass chromum plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red led cement and other end fixed etc and including all fittings complete all as specified (Cat No :4790of Prayag as equivalent )make of Jaquar/Marc/Kohler/Johnson .

S/ F PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixing of 75 mm bore laided in trenches or in floors complete all as specified and as directed.

S/ F PVC (SWR) 110mm pipes, single socketed, in any length with rubber ring joints laid in floors or trenches complete all as specified and as directed.

S/F 110mm bore PVC(SWR) vent cowl complete all as specified and as directed.

S&F 75mm diameter of out let in PVC (SWR) floor trap, plain with grating including jointing to solvent cement complete all as specified and as directed.

S&F in pillar tap cast copper alloy 15mm bore screwed down high pressure chromium plated screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15 mm dia bib tap (fancy type cromium plated) cast copper alloy with crtuch or butter fly handle screwed down for iron pipes or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supplied and fixed 15mm dia Stop valves/cock concealed type, cast copper alloy fancy type, chromium plated,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for UPVC or for unions complete all as specified and as directed.

S&F in repair Brass CP towel rail 20mm dia `D' type 60 cm long between flanges including all fitting of screws etc complete all as specified and as directed.

S&F in repair soap dish chromium plated of standard size and approved complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 150mm dia bore class NP2, pipe laid and jointed complete with collars complete all as specified and as directed.

Concrete bed in cement concrete 1:3:6 type C2 150 mm bore of pipe to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Material and labour for providing precast cement concrete as in cover slabs for manholes and similar items with plain faces in cement concrete mix 1:2:4 type B1 (using 20mm aggregate crushed stone aggregate) and setting set in cement mortar 1:4 including necessary form work complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as benching of manhole, etc complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C1(using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC concealed (fixed on wall/roof/ceiling etc), conduit of size not less than 20 mm dia and including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC conduit : SUDHAKAR / AVON PLAST /FINOLEX . Make for Copper cable: Havells/Polycab/ Plaza/Panasonic.

One light point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size.

All as per item ser no-78 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.Make :- Polycab/Havells/Plaza

S&F Switch piano, flush type single pole , one way 5 amp complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed. Make: Anchor/Cona/Leader

Supply and fix high efficiency wall mounted LED batten type not less than18W 4 ft LED light fitting complete all as specified and as directed.Make : Surya Cat ref SLE BTN T8 20W/Philips/wipro/Crompton.

Supply and fix high efficiency wall mounted LED batten type not less than 9W 2 ft LED light fitting complete all as specified and as directed. Make : Surya Cat ref SLE BTN T8 10W/Philips/wipro/Crompton.

Supply and fix heavy duty exhaust fan with louvers ,380 mm sweep, AC,1400 rpm single phase, 230 volts including necessary fixing arrangement such as Bolts and nuts etc and making good the distrubed surface with proper round shape as per site requirment complete all as specified. Make:Orient/Crompton/Bajaj/Havells/Panasonic.

Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP65 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting complete all as specified. Note:- Make :SURYA Cat part no:SLE UL 25W IP66 LXN or equivalent model of Philips/wipro/Crompton.

Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI earth wire 4mm dia including alternate layers of charcoal, salt crystal and including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc.

S&F MCB,DB SPN 04 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed.Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed. Make: Legrand/ Siemens/Scheneider/ABB.

Supply and lay standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and directed.

Supply and spread reddil earth for UG cable cushioning including punning on top and bottom of the cable complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor for for 16 sqmm 2 core all as specified and as directed by Engr-in-charge. POLYCAB / NICCO / PLAZA /Havells.

Material and labour for GI Pipe 40 mm light grade galvanised, with all fitting laid in trenches/wall / floor all as specified and directed.Make:Tata/Jindal/Prakash/Surya.

Material and labour for cutting bituminous road /PCC floor /plinth protection for laying pipe not exc wide 1.5m and 1.5m depth including refiling with excavated material and watering well ramming /compacting including earth work and making good with PCC complete all as specified and as directed. Note: PCC shall be measured and paid separately.

Material and labour for PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in filling and making good distrubed surface complete all as specified and as directed.

Supply and lay tubing medium grade galvanised with all fittings specials such as bend, elbows, tees, short pieces connection back nuts, diminishing pieces ,reducers,caps plugs and unions etc laid in trenches of following size all as specified andf as directed Make:Jindal/Tata/Prakash/Surya

50 mm bore of pipe

25 mm bore of pipe

Supply and fix electrically operated self priming Monoblock variable pressure water pump suitable for single phase 230 V supply with motor not less than 2.0 hp power and able to deliver discharge not less than 210 lpm with pressure not less than 5 bar including NRV,5 way connector,Pressure switch,Pressure tank,Pressure gauge and connecting pipes ,fasteners etc and any other connected items and necessary platform with new MS frame as per suitable gauge and size and plan size as recommended by manufacturer complete all as specified and directed. Make:Crompton/Kirloskar or as per IS.

Supply and fix gun-metal Globe valves with iron wheel screwed both ends for iron pipe of size 25 mm dia all as specified and as directed.Make:Kirloskar/Leader/L&T /Upadhyaya

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor for 16 sqmm 4 core all as specified and as directed (laying in trenches /on wall/cable tray) Make:Universal/Polycab/Nicco/Plaza/Havells/KEI

Supply and fix powder coated outdoor Panel suitable for mounting straight watertight socket 3P + N + E not less than 16amps wih IP66/67 degree protection to be mounted on suitable metal box with double door along with suitable terminal TPN 10 KA including mounting it at a height not less than 0.6 metre above ground level with 60mmx60mmx6mm MS angle with necessary pcc foundation alongwith copper busbar arrangements and connecting wires and any other necessary connected items to be completed all as specified and directed.Note:(i)Drawing shall be approved from department by the contractor before placing a order.

Supply and fix thermoplastic water tight plug and socket alongwith watertight lock 3P + N + E not less than 16amps wih IP66/67 degree protection alongwith Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable of size 6.0 sq. mm not less than 35 rm to be completed all as specified and directed. Make for plug and socket:Hensel/Sintex/spelsberg Make for cable:-Universal/Polycab/Nicco/Plaza/Havells/KEI

NLK Construction

SIVA ENTERPRISES

SRI VIGNESH BUILDERS

SUSII CONSTRUCTIONS

m/s SRI VALLI ENTERPRISES

RD ENTERPRISES

D.KUMAR