SPECIAL REPAIR TO BLDG NO H 08 TS 527 PROVN OF WATER DRAINAGE AT EME BN AND CERTAIN MINOR WORK UNDER AGE BR II OF GE NAGROTA

Amount

SCHEDULE A PART-I Taking down chowkhets or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all,as specified & directed

Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) .complete all,as specified & directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all,as specified & directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all,as specified & directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles Complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc all as specified.

Demolition of unreinforced cement concrete of any description and in any position.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided.

Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all,as specified & directed

S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 125x60mm Complete all as specified and as directed.

S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets Complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc Complete all as specified and as directed.

S & F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS Complete all as specified and as directed.

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.(Make Rajshri Plastiwood limited or Sintex)

S & F factory made solid panel PVC door shutter with wood free EPS 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification Complete all as specified and as directed..(Make Rajshri Plastiwood limited or Sintex)

S&F Steel ventilators with top hung shutter including hinges,steel pegstay complete all as specifid and directed

3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc Complete all as specified and as directed.

3mm thick pin head glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc Complete all as specified and as directed..

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc Complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed Complete all as specified and as directed.

S&F 100mm long aluminium anodised barrel tower bolt of extruded section and fixed Complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed Complete all as specified and as directed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed Complete all as specified and as directed.

S&F 150mm long aluminium handles cast type, anodised and fitted.complete all,as specified & directed

S&F 100mm long aluminium handles cast type, anodised and fitted.complete all,as specified & directed

S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete.

M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces Complete all as specified and as directed.

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc complete all,as specified & directed

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as Complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as Complete all as specified and as directed.

M&L 12mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame workorwith staples on snap grid ISI marked, cutting circular holes for electric fittings, including preparation of surfaces, fillar coat with filler, or liquid filler, transparent and bringing forward surfaces to smooth even finish and applying three coats of white wash complete all as specified and directed by Engineer-in-charge.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre Complete all as specified and as directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to grade Fe-410W-Gde E-250 Quality A Complete all as specified and as directed.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.410-0 or Fe-310-0.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') Complete all as specified and as directed.

Brick work with sub-class `B' bricks, straight or curved on plan with modular bricks exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan with modular bricks exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed.

M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.complete all as specified.

M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash Complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified.

M&L for rendering 15mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified.

M&L for 15mm thick plastering in CM 1:6 on stone surfaces (INTERNAL), surface finished even and smooth without using extra cement Complete all as specified and as directed.

M&L for Preparing new plastered surfaces of wall and applying two coats of cement based paint over a coat of white wash Complete all as specified and as directed.

M&L for Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care puttyover a coat of chalk whitening preparatory to distempering on walls etc Complete all as specified and as directed.

Preparing old plastered surfaces of wall and applying one coat of cement based paint Complete all as specified and as directed.

Preparing old plastered surfaces of wall and applying one coat of oil bound distemper etc Complete all as specified and as directed. .

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of white wash on walls after filling any hole with putty Complete all as specified and as directed.

M & L PCC 1:3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed.

M&L of 25 mm thick PCC 1:2:4 type B-0 as a sub base to receive topping layer finished even and rough complete all as specified and as directed.

M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base surfaces finished even and rough to received the topping layerComplete all as specified and as directed.

M&L PCC 1:3:6 type C1 in hold fast etc incl all necessary formwork Complete all as specified and as directed.

Providing cement concrete Type B-0 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, Complete all as specified and as M&L for directed.

M&L PCC 1:3:6 type B-2 (40mm graded aggregate) in surface channels and drains Complete all as specified and as directed.

Per- cast reinforced cement concrete M-15 (1:2:4 nominal mix ) type B-I, (Using 20mm grade stone agg) set in cement mortar 1:4 as in manhole cover all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces Complete all as specified and as directed.

Reinforced cement concrete (M-25 design mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like (20 mm graded aggregate) Complete all as specified and as directed.

TMT MS bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips Complete all as specified and as directed.

Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed.

S&F Reinforced concrete pipes,600mm dia class NP2, laid and jointed complete with collars

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and mixed with pigment to match the shade of the slab includingrubbing and polishing complete all as specified and directed.

M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm , in floors etc . Set and jointed in neat cement slurry and pointed in while or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and directed.

M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm , in floors etc . Set and jointed in neat cement slurry and pointed in while or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and directed.

M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm , in floors etc . Set and jointed in neat cement slurry and pointed in while or coloured cement to match on vertical surfaces such skirting, dados, rises to steps etc over 10mm thick rendering in cement mortar in 1:6 complete all as specified and directed.

M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

S&F Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors incl screed bed or bedding layer of CM 1:6, 15mm thick for laying floor finishes complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe .

S&F vitreous china squatting pan Orrisa pattern 580x440mm white with integral foot rest (excluding flushing cistern) fixed in repairs

S&F in repairs, self cleaning water jet, chromium plated, (HEALTHFUSET)15 mm bore with all accessories complete suitable for EWC as approved.

S&F 10 Ltr PVC valve less symphonic action type flushing cistern low level white/coloured with inlet ball valve float , handle, PVC pipe to WC and incl PVC connection 600mm long complete fixed in repairs.

S&F in repair vitreous china wash basin agle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed .

S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 in repairs

Taking up or down 15mm bore steel tubing and connections,including cleaning for refixing or removal to store.

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls

Taking up or down 20mm bore steel tubing and connections,including cleaning for refixing or removal to store.Complete all as specified and as directed.

S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.Complete all as specified and as directed.

S & F in repair 15mm bore Bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed.Complete all as specified and as directed.

S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe.

S&F in repair 15mm bore Stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed.

S&F in repairs gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair Glass corner Shelf of 300mm long as specified and directed by Engr-in-Charge

M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type B1(1:2:4)

M&L for PVC SWR gully trap 125/110mm, setting and jointing with solvent cement with grating including jointing to waste pipe fixed in concrete type B1(1:2:4)

S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flange.Complete all as specified and as directed.

PVC connection 15mm size with PTMT nuts of length 600mm Complete all as specified and as directed.

Dismantling of water tanks and removing to store of capacity exc 250 Ltr & N exc 500 ltr etc all as specified.

S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule.

M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in padding concrete complete all as specified and as directed.

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement Complete all as specified and as directed. Note:- WPC Mesured and Paid Separately.

Supplied only for Liquid water proofing compound.

Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.

One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.

Applying one coat of aluminium paint on top of APP membrane Complete all as specified and as directed.

S&F Cast Iron soil Waste and Vent pipe in any length with or without ears with cement joints laid in in floors/wall of 100mm bore all as specified complete all as specified and fixed in repair Complete all as specified and as directed.

All as pe item above but fixed to floor/wall of 75mm bore pipe Complete all as specified and as directed.

Bends ( any radius ) with duck foot or heal rest for 100 mm bore pipe fixed in repair including taking out old fittings Complete all as specified and as directed.

All as per srl item No 103 above but 75mm bore pipe Complete all as specified and as directed.

CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type ) or with parallel branches for 100mm bore pipe fixed in repair including taking out old fitting complete all as directed with oval access door fixed in repairs Complete all as specified and as directed.

All as per item 105 above but 75mm bore pipe Complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of Soil Complete all as specified and as directed.

M&L PCC 1:2:4 type B 2(40mm graded) as in foundation,filling,mass concrete and similar works Complete all as specified and as directed.

M&L PCC 1:3:6 type C 2(40mm graded) as in foundation,filling,mass concrete and similar works Complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 Complete all as specified and as directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to grade Fe-410W-(Gde E-250 Quality A) Complete all as specified and as directed.

Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed.

Preparation of old steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile stength of 550Mpa as in roof coverings/cladding to wall, fixed with self tapping screws Complete all as specified and as directed.

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore.Complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore.Complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore.Complete all as specified and as directed.

S&F PVC (SWR) Bends any radius for 110mm bore.Complete all as specified and as directed.

S&F PVC (SWR) Bends any radius for 75mm bore with oval access door.Complete all as specified and as directed.

S&F PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors.Complete all as specified and as directed.

S&F PVC (SWR) Branch pieces single ( Single Y) equal or unequal for 75mm bore with oval access doors.Complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm Complete all as specified and as directed.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete.

S&F as in repair 110 mm PVC (SWR) WC Connector with lip ring

S&F vitreous china wash hand basin white flat back of size 550x400 mm with pedestal including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified.

S&F Brass CP basin mixer fancy type for mixing hot & cold water screwed down for iron pipe and fixed of 15mm bore dia of pipe

SCHEDULE A PART-II Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge

Taking down ceiling fan/Wall mounting fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20 mm dia medium grade ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories for modular switches/ socket etc. with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly for One light point / fan point / bell point controlled by one switch 5 Amp complete all as specified and directed. .

All As per Srl item N0 131 above but for one socket out let 5 Amp controlled by one switch on same board with other switch .

All As per Srl item N0 131 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .

All as per item No 131 above here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified.

All as per Item No-139 above but 3 module complete all as specified.

All as per Item No-139 above but 2 module complete all as specified.

All as per Item No-139 above but 8 module complete all as specified.

All as per Item No-139 above but 12 module complete all as specified.

S & F Modular blanking plates 1 module complete all as specified.

S&F switch piano flush type 5 Amps single pole one way complete,

S&F socket outlet 5 pin, 5 Amp flush type complete.

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete.

S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type complete.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate including 10 Watt LED Bulbs suitable for batten fittings complete all as specified and directed.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.

S&F sheet metal enclosure distribution board SPN 08 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.

S&F sheet metal enclosure distribution board SPN 04 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete

S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.

Supply and fixing LED flood light fitting 100 Watt 230 V AC indoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 4 core nominal cross section in service connections

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 25 Sqmm 2 core, complete all as specified and directed by Engineer-in-Charge

Excavation in trenches in any type of soil not exc 1.5 mtr in depth and 1.5 mtr wide and getting out for laying of cables.

Returning and filling in including spreading, leveling , watering and well ramming in layers not exceeding 25 cm thick excavated earth complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

M&L for well burned bricks , laid flat ( old size) sub class B designation '75' for cable protection copmplete all as specifed and directed.

Sand cushioning to under ground cable laid in trenches for laying of LT UG cables 8 cm depth before laying the cable and 15 cm after laying and punned down to a depth of 10 cm as per MES SSR Part-I (2020) all as specified and directed. Note: Punned thickness shall be measured and paid to the contractor.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.

BHARTI CONSTRUCTIONS (BID ID -3162255)

M/S VINAY KUMAR SHARMA (BID ID -3167794)

M/S MANISHA BUILDERS (BID ID -3162672)

BADRI NATH AND SONS (BID ID -3167248)

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3167845)

M/S CJ CONSTRUCTIONS (BID ID -3162369)

Karmnaya Construction (BID ID -3162828)

m/s GAUTAM CONSTRUCTION CO (BID ID -3162385)

ASHFAQ AHMED MANHAS (BID ID -3162771)