REPAIR AND REPLACEMENT OF UNSV STREET LIGHT /SECURITY LIGHTS, HIGH MAST LIGHTS, GATE LIGHTS AT DEMO SQN, DEMO BTY, ARO, SUPPLY DEPOT, EME WORK SHOP SARNA ENCLAVE AND GOSWAMI ENCLAVE UNDER GE (AWC) MHOW.

Amount

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes, poles etc. and getting out all excavated material in any type of soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Taking down old unserviceable PCC street light pole complete including dismantling of street light and shifting the same street light for fixing in another pole not more than one km distance including bracket and nut bolt etc. complete all as specified and directed. Note - Excavation, concrete and copping shall be measured and paid separately.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering slightly rounded / chamfered angle with and including necessary use and waste of foam work for fair finished surfaces complete all as specified and directed.

Drilling (Horizontally) existing road (maximum 10 mtr wide) suitable for passing GI tubing 40/50 mm complete all as specified and directed. Note: GI tubing shall be measured and paid separately.

Supply and laying GI pipe 'light grade' 40 mm bore in trenches, under floors, roads, along poles for protection of cables with all necessary fittings and sealing ends complete all as specified and directed. Make:- Jindal, Prakash Surya, Tata

All as per Sl. Item No. 10 above but GI pipe 'light grade' 50 mm bore.

Supplying, laying, fixing, jointing and testing LT under ground XLPE insulated, galvanised teel strip or wire armoured heavy duty electric cable with alumimium conductor,with multi stranded 1100 volts grade, cross sectional area 10 Sqmm x 2 Core, ISI-7098 marked, with electric connection lugs, laid in trenches/under floor or fixed naked with walls / on poles/ in ducts / in GI pipes etc. and including taking down complete all as specified and directed. Note - Excavation, earth work, sand cushioning, protection PCC cover, clamps, nuts , bolts, washers and pipe shall be measured and paid separately. Make - Gloster / RR kable/ Havells / Finolex

All as per Sl. Item No. 12 above but 10 sqmm x 4 Core

All as per Sl. Item No. 12 above but 16 sqmm x 4 Core

Supplying, laying, fixing, jointing and testing LT services cable heavy duty electric cable with copper conductor, 1100 volts grade, cross sectional area 6 sqmm 4 core, ISI marked, with electric connection lugs, fixed naked with walls / on poles/ on high mast / in GI pipes etc. and including taking down complete all as specified and directed. Make - Gloster / RR kable/ Havells / Finolex

Supply and laying unreinforced PCC Cable protection cover, class LV, type-1 flat with size 250 x 150 x 40 mm laid flat width wise complete all as specified and directed. Make:- Mehtab / NITCO

M&L for painting of security light steel tubular pole upto 09 mtrs length including clamp, bracket and junction box with two coats of aluminium paint after preparation of old painted surface and providing 03 no. alternate strip of 30 cm wide with black and Yellow super quality enamel paint above embeded level and writing pole no. with 02 inch wide letter complete all as specified and directed by Engr-in-Charge. Make of paint - Asian / Nerolac / Berger

M&L for painting of security light steel tubular pole upto 09 mtrs length double arms including clamp, bracket and junction box with two coats of aluminium paint after preparation of old painted surface and providing 03 no. alternate strip of 30 cm wide with black and white super quality enamel paint above embeded level and writing pole no. with 02 inch wide letter complete all as specified and directed. Make of paint - Asian / Nerolac / Berger

M&L for painting of Street light Steel tubular poles swan neck with two coats of aluminium paint after preparation of old painted surface and providing 03 no. alternate strip of 30 cm wide with black and white super quality enamel paint above embeded level and writing pole no. with 02 inch wide letter complete all as specified and directed. Make of paint - Asian / Nerolac / Berger

Supply, Installation, Testing and Commissioning of LED Streetlight Fitting with a nominal system 5300 lumen output of lumens, minimum system efficacy of 115 lm/W and total power consumption not exceeding 45 W (including driver). The luminaire shall have a rated system lifetime of 50,000 burning hours at L70B50. The luminaire should have a color temperature of 5700 - 6500K and CRI>80. The luminaire shall meet IP66/IK07 or IK08 rating with THD<10% and PF > 0.95. The luminaire housing should made of pressure die cast aluminium and the integrated luminaire optics shall have a high efficiency diffuser with more than 85% transmittance. The fitting should have an internal SPD of minimum 4 kV. The driver should have phase to phase protection for 8 hours. The luminaire should have a NABL approved LM79 report. LM80 report from the LED manufacture is a must along with photo biological report. Luminaire and the driver shall be BIS certified separately and shall posses separate "R" numbers. Fitting should include nut bolt and SS screws for suitably fixing on the exiting steel tubular pole complete all as specified and directed. Make - Philips / Bajaj / Havells

All as per Sl. Item no. 20 above but with nominal system output of 8400 lumens, minimum system efficacy of 110 lm/W and total power consumption not exceeding 70 / 72 W (including driver).

All as per Sl. Item no. 20 above but with nominal system output of 11000 lumens, minimum system efficacy of 120 lm/W and total power consumption not exceeding 90 W (including driver).

All as per Sl. Item no. 20 above but with nominal system output of 15000 lumens, minimum system efficacy of 120 lm/W and total power consumption not exceeding 120 W (including driver).

Supply, fixing, testing and commissioning in replacement energy saving long life LED 45W (gate light fitting) post top made in cast aluminium with decorative opal polycarbonate diffuser and IP 65 protection and alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS screws suitable for fixing including nut bolt as per site requirement complete all as specified and directed. Make - Bajaj CAT part No BRIL45WLED NW or equivalent in Havells, Philips, Crompton, Syska

Supply, fixing, testing and commissioning in replacement energy saving long life LED 40W (gate light fitting) post top made in cast aluminium with decorative opal polycarbonate diffuser and IP 65 protection and alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS screws suitable for fixing including nut bolt as per site requirement complete all as specified and directed. Make - Bajaj CAT part No BGCL 40W LED WH or equivalent in Havells, Philips, Crompton, Syska

Disconnecting and lowering carefully light fittings from high mast, 12-20 mtr high for maintenace / repairs of light fittings and refixing the light fittings after repairs complete all as specified and directed. Note:- Spare parts shall be measured and paid separately.

Supply, Installation, Testing and Commissioning of LED Floodlight Fitting with a nominal system 16200 lumen output of lumens, minimum system efficacy of 110 lm/W and the total power consumption should not exceed 150 W (including driver). The luminaire shall have a rated system lifetime of 25,000 burning hours at L70B50. The luminaire should have a color temperature of 5700 - 6500K and CRI>80. The luminaire shall meet IP65/IK07 rating with THD<10% and PF > 0.95. The luminaire housing should made of pressure die cast aluminium and the integrated luminaire optics shall have a high efficiency diffuser with more than 85% transmittance. The fitting should have an internal SPD of minimum 4 kV. The luminaire should have a NABL approved LM79 report. LM80 report from the LED manufacture is a must along with photo biological report. Luminaire and the driver shall be BIS certified separately and shall posses separate "R" numbers. Fitting should include nut bolt and SS screws for suitably fixing on the exiting steel tubular pole complete all as specified and directed. Make - Philips / Bajaj / Havells

All as per Sl. Item no. 27 above but with nominal system output of 21600 lumens, minimum system efficacy of 110 lm/W and total power consumption not exceeding 200 W (including driver).

Disconnecting and taking down street / security light fitting of any size / capacity / make from the pole / bldg for repair / replacment of unservisable spare parts etc., testing, cleaning the fitting internally and externally and replacement of unserviceable wiring not more than 0.3 Mtrs with 1.5 sqmm PVC insulate copper wire, checking and repairing of loose connections, replacement of wire connectors, nuts, bolts, screws and fixing the light fitting in original position on wall / pole / santry post / top of building including necessary electrical connection complete all as specified and directed by Engr-in-Charge. Note:- Driver and SPD shall be measured and paid separately.

Supply, fixing, testing and commissioning in replacement SPD for LED Street light / flood light fitting with suitable surge capacity complete all as specified and directed. Make - Bajaj, Havells, Philips

Supply, fixing, testing and commissioning in replacement Driver for LED Street light / flood light fitting with suitable surge capacity complete all as specified and directed. Make - Bajaj, Havells, Philips

S&F in repairs 8 kW, single phase nature switch for automatic switching on / off street light based on lux level of nature light, consisting of sensor, overload protection fuse gear, power contactor and MCB of suitable capacity, terminal blocks for cable entry & control unit enclosed in pole / wall mountable enclosure made out of rust proof, shock proof, termite proof FR grade SMC, conforming to IP 54, with universal lock and key arrangement complete all as specified and as directed. Make - Swadeep, L&T, Hager, Havells

All as per Sl. Item no. 32 above but 12 kW, Three phase.

S&F in replacement sensor of nature switch having illuminance level for switching ON at 30 lux and for switching OFF at 10 lux along with part night operation facilty of 4-12 hrs arrangement complete all as specified and directed. Make - Swadeep, L&T, Hager, Havells

S&F in replacement of security light bracket with 40 mm bore GI Pipe light grade 1.2 mtr long bend to an angle of 120 degrees with two nos. MS flat iron clamp 50 x 6 mm, nuts, bolts and washers, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in replacement of PVC junction box IP - 66 / 67 thermoplastic poly carbonate of size 205 x 255 x 112 mm, including connector block, two holes for incoming and outgoing cables, providing cable glands double compression as per requirement, providing DIN rail for mounting MCB SP and clamps made out of MS flat iron 25 x 4 mm, MS hexagonal bolts, nuts and washers for arrangements to pole/ surfaces complete all as specified and directed. Make - Hensel / Schneider / GE

Trimming / lopping of tree branches touching LT/HT OH lines not exceeding 30 cm girth, shrub, vegetation, bushwwod and saplings at least upto 2 mtr from outer edge of ACSR including removing of braches of trees etc. to a distance exceeding 100 mtr and not exceeding 150 mtr complete all as specified and directed. Note :- (i) Linear length centre to centre of the poles shall only be measured. (ii) Shutdown wherever required shall be taken from Engr-in-Charge.

S&F in replacement busbar 400 Amp capacity, colour code with neutral including arrangement of 200 Amp MCCB three phase and netural, 25 kA, Ics=100% Icu with encloser including fixing arrangement complete all as specified and directed. Make of MCCB - Indo Asian, Schneider, L&T, Havells, C&S

Supply, fixing, energy saving enviornmental friendly long life exclusive innovative die cast aluminium IP- 66 flood light 120 watt suitable for highlighting architectural facade and general purpose lighting complete all as specified and as directed. Make - Bajaj CAT part No BJFL 120W LED I or equivalent in Havells, Philips

M&L steel tubular swaged poles complete with cast iron base plate, finial tapper plug, bolts, nuts & screws as specified type 410 SP-31(9 mtr long) complete all as specified including painting of pole with one coat of black bituminous paint (up to planting depth) and above plinth block / concrete coller with two coats of aluminium paint over a coat of red oxide primer including making five alternate strips 30 cm wide with black and yellow paint in two coats, including three core wire minimum 1.5 sqmm from junction box to street light including taking down existing poles of any description complete all as specified and directed. Make of Pole:- Jindal / National Tube / Bharat Conduit / BCW Kanpur Note:- Earthwork PCC in foundation and coping shall be measured and paid separately under respective items.

Supply and fix inreplacement of Digital time switchs programmable every I min, with backup of 6year , 28 memory locations, current capacity 16 A, weekly program, with 1 changeover (1 CO) total 28 programs complete all as specified and directed. Make- Indoasian modle No- DIN Type Daily / weekly with Co and Equivailent in Havells, L&T

Supply and fix inreplacement Power contactors three phase 415 V , AC supply , cap 40 Amp complete all as specified and directed. Make- Indoasian modle No-HSN code 8536 and Equivailent in Havells, L&T

Supply and fix inreplacement Power contactors Single phase 230 V , AC supply , cap 32 Amp complete all as specified and directed. Make- Indoasian modle No-HSN code 8536 and Equivailent in Havells, L&T

Supplying, laying, fixing, jointing and testing LT services cable heavy duty electric cable with copper conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core, ISI marked, with electric connection lugs, fixed naked with walls / on poles/ on high mast / in GI pipes etc. and including taking down complete all as specified and directed. Make - Gloster / RR kable/ Havells / Finolex

yash enterprises

ms shrilaxminarayan and sons

Mighty Steel Sales Crop

AGARWAL BUILDERS

Vinayak Trading House

m/s bansal construction