Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAdmitted-Finance 141 BASEMENT CABIN NO 2 SANT NAGAR EAST OF KAILASH SOUTH DELHI DELHI 110065 | SOUTH EAST DELHI | DELHI | 110065 | ₹4.1 L | L1 | Admitted-Finance |
| 2 | L2₹4.2 L+₹5,289 (1.28%)Admitted-Finance | ₹4.2 L+₹5,289 (1.28%) | L2 | Admitted-Finance |
| 3 | L3₹4.2 L+₹7,695 (1.86%)Admitted-Finance | ₹4.2 L+₹7,695 (1.86%) | L3 | Admitted-Finance |
| 4 | L4₹4.3 L+₹14,045 (3.39%)Admitted-Finance | ₹4.3 L+₹14,045 (3.39%) | L4 | Admitted-Finance |
| 5 | L5₹5.9 L+₹1.7 L (41.4%)Admitted-Finance | ₹5.9 L+₹1.7 L (41.4%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Anguri Enterprises Pvt. Ltd. L1 | NITIN SHARMA L2 | Ram Milan Govt. Contractor Supplier & Decorator L4 | M/s S.K.Industries L3 | UDYAMIN ENTERPRISES L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | ||||||||
| 2.00 | Hot finished welded type tubes | 1,785 | Kg | 84 ₹1,49,940 Lowest | 129 ₹2,30,265 | 140 ₹2,49,900 | 135 ₹2,40,975 | 200 ₹3,57,000 |
| 3.00Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | ||||||||
| 4.00 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 147 | Kg | 85 ₹12,495 Lowest | 111 ₹16,317 | 130 ₹19,110 | 115 ₹16,905 | 180 ₹26,460 |
| 5.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 203 | Sqm | 1,200 ₹2,43,600 | 705 ₹1,43,115 | 670 ₹1,36,010 Lowest | 755 ₹1,53,265 | 800 ₹1,62,400 |
| 6.00Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | ||||||||
| 7.00 | Two or more coats on new work | 59 | Sqm | 120 ₹7,080 | 84 ₹4,956 Lowest | 100 ₹5,900 | 95 ₹5,605 | 155 ₹9,145 |
| 8.00Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: | ||||||||
| 9.00 | G.S. Sheet | 203 | Sqm | 30 ₹6,090 Lowest | 147 ₹29,841 | 110 ₹22,330 | 50 ₹10,150 | 175 ₹35,525 |
| 10.00 | Credit of dismantle of old iron scrap like steel windows / door frames, MS grills, MS bars, GS Sheet, GI pipe and fittings etc. | 203 | Kg | 25 ₹-5,075 Lowest | 25 ₹-5,075 Lowest | 25 ₹-5,075 Lowest | 25 ₹-5,075 Lowest | 25 ₹-5,075 Lowest |
Tender Value
₹5.6 L
EMD Value
₹11,224
Closing Date
6 Aug 2026, 3:00 pmClosed
Executive Engineer
Office of the Executive Engineer (CD-1), Room No- AD-117, Main Building, IIT Delhi, Hauz Khas, New Delhi-110016
Repair of existing car parking shed including replacement of roofing sheets at Taxila apartments, West Campus, IIT Delhi
2026_IIT_919846_1
IITD/WORKS (SP-5358)/2026
Open Tender
Miscellaneous Works
Works
30 days
Indian Institute of Technology Delhi Hauz Khas
As per tender documents
15 documents required · 15 mandatory
₹0
₹11,224
12 Aug 2026
30 Jul 2026
7 Aug 2026
30 Jul 2026
6 Aug 2026
30 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | - | - | - | - |
| 2 | Hot finished welded type tubes | 1,785 | Kg | - | - |
| 3 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | - | - | - | - |
| 4 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 147 | Kg | - | - |
| 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 203 | Sqm | - | - |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | - | - | - | - |
| 7 | Two or more coats on new work | 59 | Sqm | - | - |
| 8 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: | - | - | - | - |
| 9 | G.S. Sheet | 203 | Sqm | - | - |
| 10 | Credit of dismantle of old iron scrap like steel windows / door frames, MS grills, MS bars, GS Sheet, GI pipe and fittings etc. | 203 | Kg | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
BOQ_966655.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .