INTERIOR FURNISHING , FURNITURE WORK i/c INTERNAL ELECTRICAL WORK OF OFFICER CHAMBER OF DIRECTORATE OF PENSION P.F. AND INSURANCE DEPARTMENT BHOPAL

Amount

Work Station - Providing and fixing Work Station also providing 600mm wide table top made in 18 mm ply finished in 1 mm the laminate fixed in as shown in drawing, so providing storage cabinate below table top of size 400mm x 700mm & 450mm deep having 1 nos 100mm deep drawers with lock & shutter below all external surfaces to be finished in 1mm the laminate, make provisions for networking & cable to run inside work stations.Inner areas abobe table top to befinished.The rate shall include all necessary hardware like 3'' ss hinges, catchers, handles,drawer channels, locks etc. Inner surfaces to be finished with 0.8 mm thick laminate complete finish .

Executive Table-5'x2' ' Table made of 18 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm and foot rest with providing storage cabinate below table top of size 400mm x 700mm & 450mm deep having 1 nos 100mm deep drawers with lock & shutter made in 19 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm, make provisions for networking & cable to run inside work stations.Inner areas abobe table top to befinished.The rate shall include all necessary hardware like 3'' ss hinges, catchers, handles,drawer channels, locks etc. Inner surfaces to be finished with 0.8 mm thick laminate complete finish .

Executive Table-6'x2.5' Table made of 18 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm and foot rest with providing storage cabinate below table top of size 400mm x 700mm & 450mm deep having 1 nos 100mm deep drawers with lock & shutter made in 19 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm, make provisions for networking & cable to run inside work stations.Inner areas abobe table top to befinished.The rate shall include all necessary hardware like 3'' ss hinges, catchers, handles,drawer channels, locks etc. Inner surfaces to be finished with 0.8 mm thick laminate complete finish .

Table 4' x 2' made of 18 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm and foot rest with providing storage cabinate below table top of size 400mm x 700mm & 450mm deep having 1 nos 100mm deep drawers with lock & shutter made in 19 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm, make provisions for networking & cable to run inside work stations.Inner areas abobe table top to befinished.The rate shall include all necessary hardware like 3'' ss hinges, catchers, handles,drawer channels, locks etc. Inner surfaces to be finished with 0.8 mm thick laminate complete finish .

Filling storage 16" deep , made of 19mm comm b/b finished with laminate externally & Internally the storage shall have intermediate shelf finished with 1 mm laminate all side teak wood beeding size of 22mm x 6mm,

Roller Blinds : Providing and fixing of vertical dust proof roller Blinds of approved shade texture and fabric ( opaque / eclipse )with aluminium gear androlling arrangement , duly powder coated with all necessary mechanism complete in all respects and properly finished to the satisfaction of engineer in charge.

Colour Acid Glass work- providing and fixing of colour acid glass work complete finish. as per specifications drawings design and as directed by Engineer-in-charge.

Providing and fixing steel dustbin with cover and rubber base for water protection perforated design as per direction of Engineer in charge.

Providing and fixing Door Footmate ( Size 5'x2') of specified as per direction of Engineer in charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up staqndard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold . Fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever Aluminium Work required icluding cleat angle, Aluminium snap beading for glazing /paneling C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing and paneling to be paid for separately. Provinding & Fixing Aluminium 3 Track Windows with 4 mm thick glass and SS mosquitomess Complete Hardware

Providing & Fixing of 24-Port Data Switch of [Managed Layer-2 with 2-Giga Ports (10/100/1000) ] Make: D-link/Cisco/Netgear

COMPACTOR-Single Body-Fix-Main-Unit :- Providing & Fixing Size-900x450x2100 Ht. The system has a rigid knock down construction made out of 0.8 mm thick cold rolled close anealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close annealed sheet. Bottom track channel is 100 x 25 x 2mm. with central locking arrangement. Each body has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness of minimum 45-50 microns. as per specifications drawings and as directed by Engineer-in-charge. Body structure made of 1 mm thick cold rolled close annealed sheet & internal structure made of machine parts, sprocket, chain etc. All machine parts are zink plated. All sheet metal components are Epoxy powder coated with anti corrosion treatment of surface. as per specifications drawings and as directed by Engineer-in-charge.

COMPACTOR-Single Body-Fix-Addon Unit :- Providing & Fixing Size-900x450x2100 Ht. The system has a rigid knock down construction made out of 0.8 mm thick cold rolled close anealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close annealed sheet. Bottom track channel is 100 x 25 x 2mm. with central locking arrangement. Each body has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness of minimum 45-50 microns. as per specifications drawings and as directed by Engineer-in-charge. Body structure made of 1 mm thick cold rolled close annealed sheet & internal structure made of machine parts, sprocket, chain etc. All machine parts are zink plated. All sheet metal components are Epoxy powder coated with anti corrosion treatment of surface. as per specifications drawings and as directed by Engineer-in-charge.

COMPACTOR Single Body-Mobile-Main Unit :- Providing & Fixing Size-900x450x2100 Ht. The system has a rigid knock down construction made out of 0.8 mm thick cold rolled close anealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close annealed sheet. Bottom track channel is 100 x 25 x 2mm. with central locking arrangement. Each body has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness of minimum 45-50 microns. as per specifications drawings and as directed by Engineer-in-charge. Body structure made of 1 mm thick cold rolled close annealed sheet & internal structure made of machine parts, sprocket, chain etc. All machine parts are zink plated. All sheet metal components are Epoxy powder coated with anti corrosion treatment of surface. as per specifications drawings and as directed by Engineer-in-charge.

COMPACTOR Single Body-Mobile-Addon Unit :- Providing & Fixing Size-900x450x2100 Ht. The system has a rigid knock down construction made out of 0.8 mm thick cold rolled close anealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close annealed sheet. Bottom track channel is 100 x 25 x 2mm. with central locking arrangement. Each body has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness of minimum 45-50 microns.as per specifications drawings and as directed by Engineer-in-charge. Body structure made of 1 mm thick cold rolled close annealed sheet & internal structure made of machine parts, sprocket, chain etc. All machine parts are zink plated. All sheet metal components are Epoxy powder coated with anti corrosion treatment of surface. as per specifications drawings and as directed by Engineer-in-charge.

COMPACTOR Double Body-Mobile-Main-Unit :- Providing & Fixing Size-900x900x2100 Ht. The system has a rigid knock down construction made out of 0.8 mm thick cold rolled close anealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close annealed sheet. Bottom track channel is 100 x 25 x 2mm. with central locking arrangement. Each body has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness of minimum 45-50 microns.as per specifications drawings and as directed by Engineer-in-charge. Body structure made of 1 mm thick cold rolled close annealed sheet & internal structure made of machine parts, sprocket, chain etc. All machine parts are zink plated. All sheet metal components are Epoxy powder coated with anti corrosion treatment of surface. as per specifications drawings and as directed by Engineer-in-charge.

COMPACTOR Double Body-Mobile-Addon-Unit :- Providing & Fixing Size-900x900x2100 Ht. The system has a rigid knock down construction made out of 0.8 mm thick cold rolled close anealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close annealed sheet. Bottom track channel is 100 x 25 x 2mm. with central locking arrangement. Each body has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness of minimum 45-50 microns. as per specifications drawings and as directed by Engineer-in-charge. Body structure made of 1 mm thick cold rolled close annealed sheet & internal structure made of machine parts, sprocket, chain etc. All machine parts are zink plated. All sheet metal components are Epoxy powder coated with anti corrosion treatment of surface. as per specifications drawings and as directed by Engineer-in-charge. Note:- The Bidder Shall quote his own rates for item rates 1 to 17

Bidder Name

Amount

HIMALAYA TRADERS(GSTN-23ACVPC8587H1Z2)