Estimate for Construction of OHSR tank 1 at village bhatton in District Ropar

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. B Mechanical Means (A) Depth upto 3 m

Cement concrete 1:8:16 with stone ballast 20 mm gauge in foundation and plinth

Cement concrete 1:3:6 with stone ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steelreinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters, buttresses etc when curved.

Centering and shuttering for columns (circular or curved in plain)

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Centring and shuttering for R.C.C. domes

Providing,Stringingout, cutting, Jointing and testing of ISIMarkedD.I.Pipe(S&S)asper IS8329and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring (A) D.I. Pipe as per IS 8329 DI-K7 (I)450mm i/d pipe lines laid complete.

Providing,Stringingout, cutting, Jointingand testingof ISIMarkedD.I.Pipe(S&S)asper IS8329and layingthesame in trenches to correct alignment andgradients, jointedwith rubber tytonjointsfittedcompleteincludingall cartage, cost of rubber ring (A) D.I. Pipe as per IS 8329 DI-K7 (J)500mm i/d pipe lines laid complete

Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 200MM

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (C) Class PN-1 as per ISI (D) 200mm i/d Sluice Valves flanged

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (i) 450mm i/d Sluice Valves flanged

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 500mm Sluice Valves flanged

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing inposition

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines.

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

12.5 mm thick cement plaster 1:4

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm

Iron grated doors, including pintle hinges & arrangements.

Providing , supplying , fixing puddle collar DI(450 MM) AS per IS code 9523:2000 as approved by Engineer incharge complete in all respects.

Providing , supplying , fixing puddle collar DI(500 MM) AS per IS code 9523:2000 as approved by Engineer incharge complete in all respects.

Any Other Items

Please Enable Macros to View BoQ information