SPECIAL REPAIR TO BLDG NO WB-34 (07 X ORS MD QTRS) UNDER GE(MCTE) MHOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles .

M & L for Virified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

All as per item No.2 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

All as per item No.4 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S&F in repairs vitreous china,white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15mm GI bore pipe complete all as specifed and directed

S&F in repair chromium plated brass Central hole basinmixer (Hot and cold) without popup waste system complete screwd down for15mm GI bore pipe complete all as specifed and directed

S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.

S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S & F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge.

S & F in reparis Stainless Steel Soap Dish fixed to wall all as specified and directed by Engr-in-Charge. Make : Prayag Cat Part No BA-15S or equivalnet .

S&F in repair SS towel ring brass chromium plated with glossy finishes .

S&F in repair sinks made of stainless steel kitchen sink, size 610 x 460 x 203mm incl waste coupling, waste pipe and all necessary fittings complete all as specifed and directed. Make Prayag Cat Part No (Overall size is 610 x 460 x 203mm) and (bowl size is 560 x 405 x 203mm) or equivalent.

S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S & Fixed in repair Flexible Kitchen Mixers with Flexi Spout, highly durable, food class material, eco freidnly, anti-rust, Colour-blue premium quality all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M&L for preparation of newly surfaces of walls and applying two coats of Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl white wall care putty as per manufacturer's instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ spray/ roller of building upto the height G+2) all as per directed by Engr-in-Charge).

M&L for complete removal of exisitng surfaces of walls and applying two coats of Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl white wall care putty as per manufacturer's instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ spray/ roller of building upto the height G+1) all as per directed by Engr-in-Charge).

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl white wall care putty all as directed by Engr-in-Charge.

M&L for preparation of complete removal of existing treatment of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl white wall care putty all as directed by Engr-in-Charge.

M&L for Rendering 5mm thick on fair faces of concrete/ brick interior ceiling surfaces in cement mortar 1:3 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl white putty all as directed by Engr-in-Charge.

M&L for preparation of complete removal of existing treatment of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat thick ceiling putty all as directed by Engr-in-Charge.

Taking down old curtain rods/ drapery rods of any description and S&F 25mm Stainless Steel Curtain rod with premium quality including brackets and other accessories complete all as specified and directed.

S & F PVC size 110 x 110mm Nahani Trap all as specfied and directed.

S&F Brass Bottle Trap 300mm (12") Designer wall connection pipes and wall flange complete all as specified and diretced. Make :- Prayag cat No BEA-28 or equivalent approved make by GE.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, table top for wash basin, urinal partition, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M&L for Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for and removing demolished materials to a distance exceeding 250 Mtr complete all as specified and directed.

M & L for RCC type B-01:2:4 (12.5mm graded stone aggt) for shelves supports on walls. complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Dismantling of cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches or floor or wall if required

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

S&F in repair PVC (SWR) bend/shoe 75mm bore, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 75mm bore any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

S&F in repair PVC (SWR) bend/ shoe 110mm bore, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 110mm bore any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F Grating 100mm bore of Stainless Steel with or without hole complete all as specified and directed.

Demolition of stone slab and tiles, interlocking paver block laid bedded and pointed in any mortor of any description or thickness in floor complete all as specifed

M&L for taking down/dismantling of existing roof treatment of any description such as PCC Padding/ Coba treatment/ mud phuska/ Lime conc, Old APP membrance roof treatment etc terracing including screed bed etc. Hessian base felt/ tar felt etc. (any type and thickness) complete all as specified & directed.

M&L for Removal of demolished materials to a distance exceeding 250 Mtr but not exceeding 500 Mtr and deposting where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on roof surface including mixed with WPC as per manufacturer's instruction's and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respectiveitem of sch 'A'.

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Pidilite, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gaurantee for water tightness including testing complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membrane (centre core shall be 150 GSM, weight not less than 4 kg/ sqmtr) of film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface. NOTE :- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

Dismantling of Mangalore pattern or similar tiles in roofing all as specfied and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in ridges valley gutters etc all as specified and directed by Engr-in-Charge

Dismantling framed work timber scantlings 40 sq cm and over in section , in any position all as specified and directed by Engr-in-Charge .

S & F mild steel work as in main and cross beams, hip and jack rafters; purlins, vertical sections, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confiring to Fe 410-W (Gde-E 250 (quality A) all as specifed and directed by Engr-in-Charge.

S & F mild steel works in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment .confiring to Fe 410-W (Gde-E 250 (quality A)

M & L for preparation of new iron or steel surfaces of any description, over 10cm in width or girth,not applying two coats of synthetic enamel paint over a coat oxide zince chrome primer complete otherwise described

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60mm x 1.5mm thick with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm etc, complete all as specified and as directed.

S&F Pressed steel door frame for single door, size 165 x 60mm x 1.5mm thick with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3 mm) of length 30 cm etc, complete all as specified and as directed.

S & F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

S&F solid PVC door frame of size 50mm x 47mm with a wall thickness pf 5mm mde out of exruded 5mm single side prelaminated PVC foam sheet, mitre cut at two corneers and jointed with 2 Nos of 150mm longnbrackets of 15mm x 15mm M.S square tube. The two vertical door profiles are to be reinforced with 19 x 19mm M.S square tube. The door frame shall be fixed to the wall using 65/ 100mm long M.S screws through the frame by using PVC fasteners. A minimum of 4 Nos of screws to be provided for each vertical member etc. complete as per manufacturers specification and direction of Engr-in-Charge.

S&F factory made Factory made solid panel PVC door shutter 30mm thick both side pre-laminated consisting of frame made out of M.S. tube of 19 gauge thickness adn size of 19mm x 19mm for style and 15 x 15mm for the top and bottom rails, M.S frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tappered in 45 degree angle on either side forming styles and 5mm thick 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rails. Top bottom and lock rails shall be tapered on both sides to form lock rails. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick 20mm wide side cross PVC sheet be provided asgap insert for the top rail and bottom rail. Panelling of 5mm thick both side PVC sheet to be fitted in the MS frame welded/ sealed to the styles and rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side and joined togehter with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' channel using PVC solvent adhesive etc. complete as per direction of ENgr-in-Charge. manufacturer's specification & drawing (for W.C and bathroom door shutter. all as specified and directed by Engr-in-Charge.

M & L for PCC 1:2:4 type B0(12.5mm graded) aggregate for filling in pressed steel door frames.

S&F 200mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 120mm size butt hinges, heady weight, cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

S&F 125mm size extruded aluminium alloy handles, fabricated type.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

S&F powder coated aluminium sliding window three track with two glass shutters using 5mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperature 1.61 mm using aluminium powder coated section aluminium cleat, PVC track, bearing, handle, lock, rubber beading etc complete fittings. Make :- Jindal or equivalent approved.

S&F powder coated aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremesh including removing old steel ventilators incl finishing the demolished surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including 02 coat of cement based paints with primer incl all fittings , accessories etc all as specifed and directed by Engr-in-Charge. Make :- Jindal or equivalent approved.

M&L for 5.5mm thick sheet glass ordinary quality in panes exc 0.50sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet kitchen cabinet shelf horizontal/ vertical fixed in self tapping screws, nails etc. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/ slabs/ blankets any thickness including grid work/ aluminium frame work, cover fillets complete all as specified.

S & F Continuous (piano) hinges,30mm Width of flaps (when open) in mm brass, bright finish or electrogalvanised Continuous (piano) hinges, bright finish or electrogalvanised

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed.

S& F 100mm size MS mat/ glossy finish handle complete all as specfied and directed .

M & L for Anodised aluminium snap grid frame work for false ceiling incl Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M & L for 6mm thick Fibre Cement Designer Ceiling Tile, (High Pressure steam cured), pre-painted, self -embossed, reinforced Everest designer cemetn boards (Ivory Colour) of Oceanic/ Lake & Hill/ Electra/ Cascade texture, conforming to IS 14862: 2000 Category 3 Type B, having Density 1200kg/ m3, miniumum module of Rapture greater than 10 Mpa and Compressive strenght 38.23 Mpa.

M & L for rubbing and wax polishing the old kota stone flooring all as specifed and directed by Engr-in-Charge.

Taking down carefully copper/ alluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches,sockets, ceiling roses, pendens, rgulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down ceiling fan/ exhaust fan/ of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M No-III Mhow complete all as specified and as directed.

Taking down carefully MCB DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down carefully light fitting any type for refixing OR taken in schedule of credit as directed at site

Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M No-III Mhow complete all as specified and as directed.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and re fixing after work complete all as specified and as directed.

Taking down existing old unserviceble LT UG/ service cable of any descrition and size complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non-metallic PVC concealed/ surface conduit conduit (Pathaer block) and suporting arrangement of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular rectangular PVC box suitable size, Modular cover plate and Modular cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- Make of cable :- Havells/ Finolex/ RR Kabel Ltd./ L&T Make of PVC Conduit (FRLS) :- Presto Plast/ Finolex/ Jindal/ Asian/ AKG

(a) One light/ fan/ bell controlled by one, one way switch 5/6 Amps

(b) One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

(c) One 3 pin, 5/6 amps socket outlet point on SAME BOARD controlled by one, one way 5/6 amps switch

Point wiring with 2.5Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non-metallic PVC concealed/ surface conduit and suporting arrangement of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 2.5Sqmm (nominal cross sectional area) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/ 16 amps socket out-let point on an independent board including modular rectangular PVC box for suitable size, Modular cover plate and Modular cover frameof suitable size and making good disturbed surface of walls and floors etc. complete all as specified and directed. Make of cable :- Havells/ Finolex/ RR Kabel Ltd./ L&T Make of PVC Conduit (FRLS) :- Presto Plast/ Finolex/ Jindal/ Asian/ AKG

S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular switch 1 way 6 A, 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/ 16 A, 2 module complete all as specified and directed.

S & F bell push flush type, 5 Amp as directed by Engr-in-Charge.

S&F lamp holder insulated body with back plate for batten fittings complete all as directed.

S&F Buzzer Ding Dong AC 230 Volts Single pole.

Supply and fixing 18W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed. Make :- Orient Cat Part No LBLN-18-C-FC or equivalent make of Wipro/ Philips/ syska as approved by GE.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. Make :- Wipro/ Orient/ Philips/ syska or equivalent approved.

Supply and fix in repairs Wall light fittings & including LED bulb of 7 watt, including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Wipro/ Philips/ Orient or equivalent approved.

Supply and fix LED bulb of 7 watt, Of base B-22, cat part no LHLDBWHB4L8R007, lm 700, col tamp 6500 K suitable for fixing in lamp holder. Make :- Wipro/ philips/ havells or equivalent approved.

S&F MCCB/ MCB VTPN DB 4 way (F1+12) double door with 200 Amps rated bus bar, 430 volts, 50 Hz complete all as specifed and directed. Make :- Indo-Asian Cat Part No 810436 or equivalent make in Bajaj, Philips, Crompton.

S&F MCB DB SPN 8 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz complete all as specifed and directed. Make :- Indo-Asian Cat Part No 810321 or equivalent make in Philips, Crompton.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. all as specified and directed. Make :- L&T/ ABB/ schneider

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. Make :- L&T/ ABB/ schneider

S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 100 Amps rating, 16 KA breaking capacity complete

M & L for sub main wiring with 02 runs of 6 sqmm main wire along with 01 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed. NOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable :- Havells/ Finolex/ RR Kabel Ltd./ L&T Make of PVC Conduit (FRLS) :- Presto Plast/ Finolex/ Jindal/ Asian/ AKG

M & L for sub main wiring with 02 runs of 4 sqmm main wire along with 01 run of 04 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed. NOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable :- Havells/ Finolex/ RR Kabel Ltd./ L&T Make of PVC Conduit (FRLS) :- Presto Plast/ Finolex/ Jindal/ Asian/ AKG

S&F replacement of exhaust fan, steel body AC single phase 230 volt of size 300mm sweep complete with blade, frame and louvers all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.

Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250/ 200mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. Make : Havells Model Ventil Air-DX White or equivalent in Crompton/ Almonard

Supply and fixing ceiling fans complete with blades, down rods, electronic fan regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) incl taking down of old ceiling fan in safe custody and deposit to E/M Store all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.necessary electrical connection incl taking down and safe deposit of old unserviceable Geyser to E/M Store complete all as directed by Engr-in-charge. (Make- Havells, Model- Puro plus or equivalent)

M&L for Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core laid in pipes, trenches/ ducts, on poles complete all as specified and directed.

Supply laying and jointing GI pipe light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

BHATIA ASSOCIATES

sunway associates

Sudarshan Associates

Goyal Construction

M/S Ashish Construction

Jamna Constructions