Constructing Liquid Waste Management Project at Patkhal Tal Satara Dist Satara

Item No1:- Excavation for foundation / pipe trenches in earth ,soils of all types sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc

Item No 2:- Excavation for foundation / pipe trenches in Hard Murum including removing the excavated material upto a do inance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc comp

Item No 3:- Excavation for foundation / pipe trenches in Soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc comp

Item No 4 :-Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)

Item No. 5- Providing and laying in situ Cement Concrete M-15 of trap/ ranite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)

Item No. 6 - Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Item No.7- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 8 - Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Item No. 10- Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)

Item No. 11- Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)

Item No. 12- Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations,slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches,etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F 17/306) Tor steel

Item No 13- Providing, lowering, laying and placing in position, shrouding material for porous pipe gallery / slotted pipe gallery / trench gallery with all leads and lifts involved including transportation of materials to site of works, screening and washing of materials and placing in position with given section, etc. complete as directed by Engineer-in-charge. 12 mm to 20 mm gauge pebbles

Item No 14:- Providing, lowering, laying and placing in position, shrouding material for porous pipe gallery / slotted pipe gallery / trench gallery with all leads and lifts involved including transportation of materials to site of works, screening and washing of materials and placing in position with given section, etc. complete as directed by Engineer-in-charge. 6 to 12 mm gauge pebbles

Item No 15- Providing reed loving plant which is help to reducing BOD also improve quality of water etc. Complete loading, unloading, transportatin and processing charges included

Item No 16- Providing, bioculture in west treatment plant for reduce BOD and improve quality of water etc. complete loading unloading, transporting and processing, charges included

Item No. 17-Providing fabricating And erection of stainless steel grade 304 for horizontal sequencial Batching erector for waste water treatement including laboure,transportation,loading,unloading and necessary fittings as per specification etc. complete as directed engineer incharge

Item No 18- Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, also provide rust coat to pipe for avoide rusting etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below. 125 mm ( 18.30 kg/m )

Item No 19:-Providing and fixing crimped with G.I. mesh and size 20 mm x 20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc.complete ( excluding cost of structural steel)

Item No 20:Providing structural steel work in single stanchions composed of RSJ, channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineerin- charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-6/277)

Item No. 21-Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary

Item No. 22- Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete

Item No 23:- Providing alum dozing unit for improve rate of sedementation process also trigger the coguacation process for gain the self weight of finner and suspended particaletc. Complete loading, unloading, transportatin and processing charges included

Item No 24:- Providing disinfection unit in waste tratment plant for cholrination process wich is help to vanish toxic content in wateretc. Complete loading, unloading, transportatin and processing charges included

Item No 25:- For designing, RCC Structural Steel etc. Complete and water testing charges as directed by Engineer-in-charge.

Item No 26:-Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final size of visible area 10 ft height X ( 4ft horizontal X 4ft Vertical EPS Panel)

Please Enable Macros to View BoQ information