Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-AOC | ₹2.1 L | L1 | Accepted-AOC FIRST LOWEST BIDDER AFTER FBE |
| 2 | L2₹2.1 L+₹4,186.50 (2.00%)Rejected-AOC | ₹2.1 L+₹4,186.50 (2.00%) | L2 | Rejected-AOC SECOND LOWEST BIDDER AFTER FBE |
| 3 | L3₹2.2 L+₹6,489.08 (3.10%)Rejected-AOC | ₹2.2 L+₹6,489.08 (3.10%) | L3 | Rejected-AOC THIRD LOWEST BIDDER AFTER FBE |
Tender Value
₹2.1 L
EMD Value
₹4,187
Closing Date
28 May 2026, 11:00 amClosed
EE, MECH. AND ELECT. DIVISION, MIDNAPORE
MIDNAPORE
Repair and Maintenance of 2 nos. draw shutter including their hoisting arrangement of Dhangan 2 vent Sluice in Block- Contai-I under P.S.- Contai in the district of Purba Medinipur.
2026_IWD_1023748_1
WBIW/EE/MEDM/e-NIT-03/2026-27
Open Tender
MECHANICAL
Percentage
90 days
DHANGAN 2 VENT SLUICE
Please refer Tender documents.
9 documents required · 9 mandatory
₹4,187
29 Jun 2026
12 May 2026
28 May 2026
12 May 2026
28 May 2026
12 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out old existing unservicable damaged draw/flap gate shutter of distributories/ branch canal/minor canal/channel completely after disengaging from hoisting system completely for installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or departmental godown or as directed by the Engineer in charge. The cost includes cost of man power employed for dismantling and cost of consumables like oxygen, accetylene gas, hire charges of machineries, like chain pulley block, gas set, tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading with all lead & lift. | 300 | Kg | 6.88 | ₹2,064 |
| 2 | Dismentling of screw hoisting system consisting of gear/ screw rod, padestal stool, top plate, bottom plate, G.M/C.I bush, operating wheel etc for repairing/replacement of gates and staking suitable place or as per direction of E.I.C. The cost includes cost of man power employed for dismantling, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading | 2 | Each | 1,842.9 | ₹3,685.8 |
| 3Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). | |||||
| 3.01 | i) Width of Gate shuteer size upto 2 metre | 510 | Kg | 156.48 | ₹79,804.8 |
| 4 | Supplying, fitting & fixing of screw hoisting arangement made of C.I. bottom plate , top plate, coller (free from any casting defects) with necessary holes on base plate and top plate to accomodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied seperately. | 55 | kg | 241.95 | ₹13,307.25 |
| 5Supply of Bearing | |||||
| 5.01 | Bearing no.51213 (SKF)(Thrust bearing) | 2 | Each | 5,446.53 | ₹10,893.06 |
| 6 | Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. | 15 | Kg | 1,699.65 | ₹25,494.75 |
| 7Supplying, fitting & fixing of screw rod having square thread of 1.5/2 T.P.I, Material bright steel [EN‐8/EN9/forged Cl‐4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer‐In ‐ Charge. The cost includes cost of material, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles, grease, mobil etc including carriage loading & unloading as per direction of Engineer in charge. | |||||
| 7.01 | a) upto length 3 metre | 177 | Kg. | 181.76 | ₹32,171.52 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.81 MB
BOQ_2516437.xls
BOQ • 0.33 MB
29111.pdf
Tender Documents • 0.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .