PROVN OF PAVER BLOCK, STORE ROOM AND DEMOLITION AND RECONSTRUCTION OF WALL WITH RCC FRAME AT 4AFSB UNDER GE (AF) GORAKHPUR

Amount

Demolition of brick work built in cement mortar or cement lime mortar. Complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for Complete all as specified and directed.

Dismantling wrought iron or mild steel work used as in angle iron on columns of boundry wall of any description not otherwise provided for Complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil.

Taking down chowkhat or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames). complete all as specified.

Dismantling of brick work built in cement mortar complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. Complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.Complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

M&L for PCC (1:4:8) type D2 using (40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed .

M&L for Hardcore of stone aggt of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

M&L for cement concrete Type B1 1:2:4 as in sides of paver blocks/ interlocking tiles.Complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc.1.5 m above the starting point in soft / soil all as specified and directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. Compete all as specified and directed.

M&L for RCC Design mix M-25 using 20 mm graded stone aggregate as in foundation footings,PBs, rafts beam Complete all as specified and directed.

M&L for RCC Design mix M-25 using 20 mm graded stone aggrtegate as in coulumns Complete all as specified and directed.

M&L for Brick work with subclass 'B'bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6.Compete all as specified and directed.

All as per above item no 19 but except bicks using old bricks as obtained after demolition. Complete all as specified and directed.

M&L for RCC Design mix M-25 using 20 mm graded stone aggrtegate as in mid beam/ coping. Complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. Complete all as specified and directed.

Ditto as item no 22 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. Complete all as specified and directed.

M&L for formwork to flat rough finish surface of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tobatter.Complete all as specified and directed.

Formwork to sides of pillars, posts,struts, piers, columns.Square/rectangular rough finished surfaces.Complete all as specified and directed.

M&L for formwork to sides and soffit of coping (projected)/bend for rough finished surfaces of concrete. Complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.

S&F mild steel posts and struts in fencing including cuttings tops to shape as directed, drilling holes, nothcing for wire etc flat iron fillets (for securing wire mess etc) including all necessary drilling, bolting or riveting etc and similar work incluidng taking down existing mild steel work,Complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.(As in view cutter)

Ditto as item no 30 above but except sheeting, Complete all as specified and directed.

S&F steel work in tubular Post/ trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 including all necessary work as directed by Engr in Charge. Complete all as specified.

S&F 610 mm dia punched tape concertina coil (effective dia 550 mm at stretch length of coil 6m) with two handle and spikes at both end of coil with dovetail clip 18 SWG, including razor wire 7 No, 6m length of each wire medium size, barbed length 20mm width 14mm, including 51 pins, 128 nos of clips in each coil including 230gm/Sqm zinc coating on core wire incluindg taking down existing old conceertina coil Complete all as specified and directed.

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise decribed over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of Air Force Blue colour (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F PVC (SWR)110mm dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) 110 mm dia pipes bends any radius.Complete all as specified and directed.

M&L for cement concrete 75mm, type D2, 1:4:8 (20 mm graded aggregate) as insub base.Complete all as specified and directed.

M&L for Cement concrete ,40 mm thick,type B- 0, 1:2:4 (12.50 mm graded aggregate) and finishing cement concrete surface even and smooth with usisng extra cement. Complete all as specified and directed.

M&L Virified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil. Complete all as specified and directed.

M&L for re-inforced cement concrete design mix M-25 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed.

M&L for re-inforced cement concrete design mix M-25 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span. Complete all as specified and directed.

M&L for re-inforced cement concrete design mix M-25 (20 mm graded aggregate) in Chajjas. Complete all as specified and directed.

M&L for re-inforced cement concrete design mix M-25 (20 mm graded aggregate) in slab supported on wall Complete all as specified and directed.

M&L Formwork (fair finished) to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200mm thick (Horizontal or sloping). Complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, lintels cantilevers, shelves including support, overhangs etc also splays between floors and beams etc.Complete all as specified and directed.

M&L Form work to edges of concrete flat, treads, breaks in floors, window sills, concrete railings, on penning in concrete walls,floor and roof n exc. 20 CM wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 Cm but n.exc 20 Cm for ruugh finished surface of concrete complete all as specified and directed.

M&L Formwork to chajjas, troughs and similar items including edges Complete all as specifid and direceted.

S&F Mild steel bands, straps, supprots or stays for rainwater, ventilating pipes, including bolts, if required, hooks(stay), and similar small articles conforming to Fe.290, Gde-E-165. Complete all as specified and directed.

S&F 4.00 mm thick sheet glass (Plain/Tinted in colour) in metal frame, ordinary quality n.exc 0.5sqm in each pane. Complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.

M&L Rendering 5mm thick in CM 1:3 on celing, finished even and smooth without using extra cement complete all as specified as directed.

Supply only integral liquid water proofing compound, complete all as specified and directed.Make:- Dr Fixit Pidiproof LW+ or equivalent in specified make.

M&L Rendering 10mm thick in CM 1:4 on brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.

M&L for applying evenly tack coat of industrial bitumen 85/25 @ 1.20Kg/Sqm including cleaning the surfaces complete all as specified and directed.

S&F APP based polymeric membrane minimum weighing 3Kg/Sqm and 3mm thick reinforced with polyster non woven (fabric) wt not less than 150 Gm/sqm) land on primed surface by forced application complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conf to Fe 290 Gde E 165 complete all as specified and directed.

M&L for Cement concrete ,40 mm thick,type B- 0, 1:2:4 (12.50 mm graded aggregate) and finishing cement concrete surface even and smooth with usisng extra cement. Complete all as specified and directed.

M&L for cement concrete type C1, 1:3:6 (20 mm graded aggregate) as in plinth protection.Complete all as specified and directed.

M&L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A'.Complete all as specified and directed.

M&L for cement concrte 100 mm thick type D2 (1:4:8) (40 mm graded aggregate) as in sub base .Complete all as specified and directed.

M&L for Cement concrete 40mm, type B-1, 1:2:4 (20mm graded aggregate) as in flooring. Complete all as specified and directed.

S&F machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed 20mm thick in cement concrete 1:6 complete all as specified and directed.

S&F Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with Complete all as specified and directed.

S&F steel windows or ventilators,Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.Complete all as specified and directed.

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded Complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of cement based paint (white in colour) over a coat of primer. Complete all as specified and directed.

M&L for three coats of white wash on ceiling surfaces complete all as specified and as directed.

M&L for two coats of oil bound distemper on walls over a coat of primer over 3mm thick wall care putty, complete all as specified and directed.

M&L for one coats of oil bound distemper on old wall surfaces. complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (Light,fan,socket are power) complete fitting such as switches, ceiling rose, regulator, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. all as specified and directed.

M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.

All as per item No 74 above but one 3/5 pin socket out let 5 amp on same board with other switches complete all as specified and directed.

All as per item No 74 above but socket 5 amp on independent board complete all as specified and directed.

All as per item No 74 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board complete all as specified and directed.

Supply & Fixing switch modular single pole, one way 6 Amp ,01 module complete all as specified and directed.

Supply & Fixing switch modular single pole, one way 16 Amp ,01 module complete all as specified and directed.

Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module complete all as specified and directed.

Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module complete all as specified and directed.

S&F Modular electronic type step fan regulator, 120 W (Suitable for BLDC fan)-2 module complete all as specified and directed.

Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete all as specified and directed.

Supply & Fixing lamp holder PVC / Ploycarbonate modular type complete all as specified and directed.

M & L for power/sub main wiring with four runs of single core 10 sqmm size and two run of single core 6.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC concealed conduit complete all as specified and directed.( Note - Four runs of 6 sq mm single core copper conductor and two runs of 4.0 Sq mm copper conductor shall be measured as one unit length.)

M & L for power/sub main wiring with two runs of single core 4 sqmm size and one run of single core 2.5 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC conduit complete all as specified and directed.( Note - two runs of 4 sq mm single core copper conductor and one runs of 2.5 Sq mm copper conductor shall be measured as one unit length.)

Supply & Fixing in replacement LED lamps 9 W complete all as specified and directed. .Make Havells/Bajaj /Crompton.

Taking down existing light fitting of any type,make & capacity complete all as specified and directed.

Suply and fixing in replacement engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 20 W .Make Havells/ Bajaj /Crompton.

Supply and fixing recess mounting LED luminaire of size 595mmX595mm white 36 watt, 230 volts for POP ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make BAJAJ / CG / Havells.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and directed.

Supply & fix exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including breaking necessary hole in wall for fixing the exhaust fan and making good to disturbed surfaces with cement mortar to match with existing after commissioning . Make Bajaj /Havells/Usha/Crompton.

Supply & fixing earth plug enclosure (plug and socket ) with MCB, SP 25 Amps complete all as specified and directed.

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way complete all as specified and directed.

Supply & Fixing MCB SPN 32 Amps 240 volts, 10 KA, "C" curve complete all as specified and directed.

Supply & Fixing MCB SP 5 to 32 Amps 240 volts, 10 KA, "C" curve complete all as specified and directed.

Supplying ,installation,testing,commissioning of LT energy meter panel board 3 phase 4 wire system indoor type factory made wall mounting with suitable clamp or fasteners dust and vermin proof cubical type interlocking arangement ( IP- 55 protection) fabricated with 2 mm thick CRCA sheet with Anti corrosion coating & finally polyester powder coated of finite green colour, & providing with suitable size of aluminum stripfor earth connection all as specified for the following .(a) Incoming :-(i) MCCB 100 AMPS 4 pole 415 Vollts 25 KA -01 No.(ii) Digital type amp meter 0-200 Amp with CT's 03 Nos.(iii) Digital type voltmeter 0-500 Volts -01 No.(iv) Indicating lamps (RYB) 01 set of 3.(v) Aluminium bus bar rating 150 Amps 3 phase neutral-01 set(vi) Chamber for incoming & outgoing cable. (b) Outgoing :-(i) Supply and Installation Smart energy meter AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10 A-60 A conforming to latest IS specifications and relevant IEC standards with inbuilt GSM based communication facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. MAKE:L&T or equivalent in Secure or Schneider qty -01 Nos(ii) MCCB 63 AMPS 4 pole 415 Vollts 25 KA -01 No.

Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm to 50 Sq mm 3.5 core/4 Core. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 50 sq mm 3.5 core.

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 10 Sqmm 2 core.

Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected.

Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and directed.

Labour for boring, holes for inserting of 50/40 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deeep complete all as specified and directed.

M & L GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

GANGA TRADERS (BID ID -3165626)

Dua Construction (BID ID -3164595)

M/s Vijay Enterprises (BID ID -3163805)

H AND Y GROUP (BID ID -3159707)