Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹40.3 LAccepted-AOC | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹41.0 LRejected-Finance NO 49 MSN NILAYAM 3RD CROSS HILL VIEW GARDEN TUNAHALLI SUBRAMANYAPURA POST BANGALORE 560061 | BANGALORE | BANGALORE | KARNATAKA | 560061 | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹42.4 LRejected-Finance 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | THIRD | Rejected-Finance BEING NOT LOWEST | |
| 4 | FORTH₹44.6 LRejected-Finance SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | FORTH | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
4 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
ADDITION ALTERATION TO MES COMPLEX IN BLDG NO P 1 P 3 P 6 P 7 P 43 P 45 AND OTHER SANCTIONED WORK AT SDI AND 26ED UNDER GE AF MARATHAHALLI
2023_MES_634238_1
8666/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF MARATHAHALLI
AS PER ENIT
7 documents required · 7 mandatory
₹500
GE AF MARATHAHALLI
₹86,000
Yes
22 Feb 2024
23 Dec 2023
9 Feb 2024
23 Dec 2023
4 Feb 2024
23 Jan 2024
Amount
Taking down, plastering from roof surfaces including removal of existing roof tile, roof treatment, cleaning, hacking for key scrubbing down with water, complete all as specified and directed.
Material and Labour for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in as in padding of roof for making slope, coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.
Supply only water proofing compound conplast X 421 IC of FOSROC chemcial (Indian limted) complete all as specified and directed.
Providing and applying TPO (Thermoplastic plyolefin) water proofing membrane of 1.2 mm thick over the layer of 200gsm Geo-Textile with overlap joints of 75 mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapt wall with termination aluminium strip and fix it by screw at 300mm c/c and sealed with HS jointseal PU on top including surface preparation like remove all loose gravels, dirt, oil grease and other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC/cementitious coving of 75mm radius shall be provided at all junctions between vertical and horizontal faces before applicatioin of TPO completely as per specifidcation and direction. Make : Berger (STP)/FOSROC/BASF/ASIAN PAINTS/SIKA) (Note:- Work to be carried out by the OEM or his authorities applicator
Demolition of cement concrete of any description & in any position etc complete all as specified and directed.
M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.
M&L for Raking out joints/ pointing to squared rubble masonry, coursed or uncoursed complete all as specified
M&L Keyed pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc including removal of debries outside MOD Land complete all as specified and directed.
M&L Rendering 15mm thick cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified and as directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding with backing/screed/ plaster etc.), including raking out joints hacking for key scrubbing down with water etc including removal of debries outside MOD Land complete all as specified and directed.
S&F Vitrified tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed in cement mortar (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match and icluding using of spacer between tile and filling grout complete all as specified and directed. Make -KAJARIA/JOHNSON/ORIENT
S&F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm,as in skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cement to match vertical surfaces including 10 mm rendering as in backing coat in cement mortar 1:3 complete all as specified and directed. Make -KAJARIA/JOHNSON/ORIENT
S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 etc complete Make -KAJARIA/JOHNSON/ORIENT
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 etc complete Make -KAJARIA/JOHNSON/ORIENT
M&L for Machine cut kota stone slab flooring 20-25mm thick set over 15 mm thick screed in cement mortar (1:4) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish complete all as specified and as directed.
M&Lfor Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar set over 10 mm thick screed in cement mortar (1:3) laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish complete all as specified and as directed.
M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 etc complete complete complete all as specified and directed.
S&F Vitreous China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device complete all as specified. Make -JAQUAR/CERA/PARRYWARE
S&F PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pip or lever if any size and pattern with inlet ball valve float and handle fixed to pedestal pattern water closet pan including all joints , etc complete of approved makecomplete all as specified. Make -JAQUAR/CERA/PARRYWARE
S & F in repairs Vitreous China urinal ,half stall type white complete includig providing and fixing plugs, bedding urinal against wall in cemet mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (excluding flushing cistern,flushing pipe and waste pipe complete all as specified and directed.
Supply and fix vitreous China wash basin, white, flat back, size 630 x 450mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specified and directed.
S&F waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms) complete all as specified and directed.
S&F 15mm bore Pillar taps, fancy type cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. Make -JAQUAR/CERA/MARC
S&F stop valves 15mm ,fancy type cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron piipe or unions and fixed complete all as specified and directed. Make -JAQUAR/CERA/MARC
S&F Grating doom 100mm dia of PTMT(Minimum weight 25gms) complete all as specified and directed.
S & F vitreous china urinal partition white of size 310 x 700 mm. complete all as specified and directed.
S&F Urinal spreader brass chromium plated for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. Make -JAQUAR/CERA/MARC
S&F in repairs 32mm dia flexible waste pipe for wash basin and kitchen sink/urinal complete all as specified and directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm of approved qualitycomplete all as specified and directed.
S&F 15 mm dia bore fancy type chromium plated bib taps screwed for iron pipe, or for brass ferrule complete all as specified and as directed. Make -JAQUAR/CERA/MARC
S&F in repairs two in one Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge. Make -JAQUAR/CERA/MARC
Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed. Make -JAQUAR/CERA/MARC
M & L PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet complete all as specified and directed.
M&L toilet paper holder of vitrous china fixed to walls with chromium plated brass screws in repairs complete all as specified and as directed. Make -JAQUAR/CERA/MARC
S&F in repair soap dish (Any Type) fixed to wall with brass chromium plated screws complete all as specified and directed. Make -JAQUAR/CERA/MARC
S&F in repair 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed. Make -JAQUAR/CERA/MARC
Taking up or down steel tubing and connections, 15mm bore complete all as specified and directed.
Taking up or down steel tubing and connections, 20mm bore complete all as specified and directed.
S&F CPVC 16mm bore pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified , complete all as directed by Engr-in-Charge.
S & F 20 mm bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified.
S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and as directed.
S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipescomplete all as specified and as directed.
S&F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
M&L for 55mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub floors etc.
S&F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed.
S&F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed complete all as specified and directed.
S & F butt hinges 125mm size extruded aluminium alloy with galvanised mild steel hinge pin,anodised, complete all as specified and directed.
S & F in repairs aluminium handles 150 mm size cast type anodised complete all as specified and directed.
S & F Aluminium anodised bolts barrel tower bolts 200 mm long of extruded section complete all as specified and directed.
Excavating in postholes in Hard/dense soil (or similar holes) each n.exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance n.exc 50 mtr & making good surface getting out in.
M&L for cement concrete 1:4:8 type D-2 using 40mm aggregate as in foundations, filling and mass concrete.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
S&F Steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, Complete all as specified and directed.
S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate conforming ot Fe- 410-W-(Gde-E-250) quality A etc complete.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dence soil complete all as specified and directed.
Demolition of cement concrete of any description & in any position etc complete all as specified and directed.
M & L for broken stone or boulders hard core of gauge n exc 63mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to true surface complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 (40 mm graded crushed stone aggregate) type D2 as in sub- base of floor complete all as specified and directed.
M&L 50 mm thick sand filling under floor or in foundation including watering & consolidation complete all as specified and directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.
Providing, cement concrete1:2:4 (TypeB-0) (12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded chamfered on edges complete including necessary form work all as specified and directed.
M&L for 20 mm thick screed bed cement mortar (1:4) or bedding layer of mortar for laying floor finishes all as specified and directed.
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, With grey cement with no pigment jointed and pointed in neat cement slurry in floors all as specified and directed.
Material and labour for precast cement concrete block masonry with solid blocks in PCC 1:3:6, type C-1 using 20mm graded aggregate exceeding 10cm width and setting in Ccement mortar 1:4, complete.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawings,complete all as specified and directed by Engineer-in-charge.
M & L 40mm thick, insulated PVC wall lining of consisting of PVC insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick with Single Side Prelam PVC sheet , duly fitted into wall all as per specification and drawing, complete all as specified and directed by Engineer-in-charge.
Taking down shutter of any description Shutters of n exc 1 sq. m each complete all as specified.
Taking down chowkhats or frame n exc 1.5 Sqm each with shutters (W/out taking off shutters from the frames) including door and window frames with shutters each all as specified and directed
Cutting holes in brick walls exc half brick but n.exc one brick depth, built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.
S & F collapsible gate top hung, consisting of chanel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with hold fast and brackets, complete all as specified and directed by Engr-in- Charge.
M&L for painting on new steel or iron surface of any description, over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over a coat of read oxide zinc chrome primer including preparation of surface all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar, complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide
M&L for Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.50 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L TMT mild steel bar 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M & L for rendering 5mm thick cement plaster in cement mortar 1:3 on ceiling including finished even and smooth without using extra cement
Provision of 5.5 mm thick tinted sheet glass exc 0.5 sqm in each pane of superior quality fixed to alluminium frame works with rubber beadings Complete all as specified and as directed
S&F for 12mm thick both side choice laminated prelaminated particle board for insulation purpose, fixed to aluminium framework, complete all as directed by Engr-in-Charge.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cluding cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all omplete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.
M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard and dese soil complete all as specified and directed.
Removing building materials etc.to a distance exc 1.5 km but n.exc. 5 km beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified
M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified.
M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified
M&L for preparation of new surface/undecorated surfaces surface of ceiling and applying three coats of white washing.
M & L for preparation of old surface and applying one coat of oil bond distempering on walls complete all as specified and directed.
M & L for preparation of old surface and applying one coat of cement base paint on walls complete all as specified and directed.
M & L for preparation of old surface and applying one coat of white washing paint on ceiling complete all as specified and directed.
S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) and fixing/finished with past on gap of the surface in contact with stone masonary wall/brick wall complete all as specified and directed.
S & F Powder coated anodised alluminium window and ventilator shutters sliding type without sash bar, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber packing , anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge.
Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin- charge.
Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed.
Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.
Taking down / refixing geyser any rating and any size kept in store with out damaging in safe custody and refixing same in postion after repair work completed all as specified.
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.
Dismantling and Taking down fluorescent light fitting single /double tube any wattage /any size all as directed.
Fixing only of LED light fittings 1x20 watt removed good working condition fittings kept in store with out damaging in safe custody and re-fixing the LED fittings after repair work completed.
Fixing only of LED light fittings 1x10 watt removed good working condition fittings kept in store with safe custody and re-fixing the LED fittings after repair work completed.
M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point/fan point controlled by one switch.
Description all as per item No 105 but one light point controlled by 2 way switch.
Description all as per item No 105 but One bell point controlled by one bell push
Description all as per item No 105 but for One 3 pin, 05 /06 Amps socket outlet point on same board controlled by one , one way 05/06 Amps switch
(e)Description all as per item No 105 but for One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch
Description all as per item No 105, but with 2.5 Sqmm cable and 1.5 Sqmm copper conductor as earth wire for 3 pin, 15 Amps socket outlet complete ( Socket /Switch to be measured and paid for separately).
Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed
Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed
S & F modular socket 06/16 Amps 2/3 pin combined 2 module complete all as specified & directed.
S & F modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply & fixing bell push modular type 6 Amps complete all as specified & directed.
Supply & fixing modular switch2 way , 06 Amps 1 module complete all as specified & directed
M& L for Sub main wiring with Two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm drawn through and including with suitable size of PVC conduit and its accessories , surface/ ceiling along with fixing arrangement etc including one runs of 4.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified.
Supply and fixing sheet metal enclosure MCB DB SPN 8 ways double door type with suitable bus bar complete all as specified and directed.
Supply and fix MCB single pole 5 to 32 Amps 230 volts 10 KA rupturing capacity
Supply and fix MCB single pole and neutral 5 to 32 Amps 230 volts 10 KA rupturing capacity
Supply and fix MCB Triple pole and neutral 40 to 63 Amps 230 volts 10 KA rupturing capacity
Supply and fix ceiling rose suarface bakelite three terminals 65x50mm complete all as specified.
S & F electronic fan regulator modular type, 2 module, 120W including complete all as specified and directed.
S&F in repair LED PC batten light fitting of 4 feet 20 watt, with energy efficient LED and integrated electronic driver of 20W fitting including connecting up with three core flexible copper conductor upto ceiling rose complete all as specified and directed . Make : Bajaj /CG/Philips/Havells
S&F in repair LED PC batten light fitting of 2 feet 10 watt, with energy efficient LED and integrated electronic driver of 10W fitting including connecting up with three core flexible copper conductor upto ceiling rose complete all as specified and directed. Make : Bajaj /CG/Philips/Havells
S & F in replacement Door bell AC, 230 volts, single pole in replacement of old u/s bell/ buzzer complete.
Taking down rusted GI wire and Supply & fixing GI earth wire 4.00 mm dia for interconnecting of earth electrodes all as specified.
Taking down ceiling fan/Exhaust fan, sealing the cable ends dismantling the fan blade kept in safe costody complete all as specified. Note: (a) Servicing and Spares will be measured and paid seperately .
Supply only GM bush of ISI marked suitable for ceiling fan of size 1200 / 1400mm sweep.
Supply only ball bearing suitable for ceiling fan of 1200 /1400mm sweep.
Replacement of old unserviceable capacitors 2.5 MFD of the fan in position as directed by Engr - in - Charge
Replacement of old unserviceable capacitors 4.0 MFD of the fan in position as directed by Engr - in - Charge
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan retrieved in item No 131
M&L for Painting of ceiling fans/ exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc
Fixing only exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan retrieved in item No 131
S&F in replacement single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge.
Supply and fixing 36W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts and washers of galvanised iron and thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore light gradeGI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009.
S & F MCB DB SPN 4 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.
Supply and fixing wall fan of single phase 230/240V of size 400 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed .
M & L for sub main wiring complete with two runs of 2 x 1.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
PRAGATHI BUILDERS
G K CONSTRUCTIONS
B5BUILDING SOLUTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .