COMPREHENSIVE MAINTENANCE INCLUDING JOINERY, WALL, FLOORING AND PERIODICAL SERVICES OF OTM AND MD ACCN AT MRC UNDER GE WELLINGTON

Amount

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Taking down Shutter of any description exceeding 1 sqm but not exceeding 2 sqm each all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per SSR all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing the frame as per specification and drawing in SSR.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

30mm thick glazed and skeleton, 2nd class hardwood shutter, divided into squares to receive glass, gauze (with sash bar) with plain chamfered or rounded, mitred and rebated sah bars, any numbers the size of member of shutter as specified in SSR Pt-I section 8 clause 8.24 (b) window and ventilaters shutters using second class hard wood and fitted to chowkat all as specified and as directed.

35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

35mm thick second class HW plain, framed, panelled door shutters (any No of panels) with veneered particle board medium density, 12mm thick complete all as specified and directed.

35 mm thick flush shutter, solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer with lipping/ frame on one faces, complete all as specified and as directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Mild steel hold fast conforming to Fe-290 Gde-165 all as specified and directed.

Preparation of surfaces of wood and tarring back of chowkat, area tarred exceeding 0.10 sqm but not exceeding 0.5 sqm each all as specified and as directed.

All as per item No.13 hereinbefore but treating small articles such as hold fast etc tarred area not exceeding 0.10 sqm each all as specified and as directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate over platform, bed blocks for hold fast, and like of any description, over 10mm in width or grith not otherwise described all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long for door / window all as specified and directed.

Extruded aluminium alloy handles 100 mm size, Cast type, anodised complete all as specified and as directed.

Extruded aluminium alloy handles 150 mm size, Cast type, anodised complete all as specified and as directed.

Aluminium handles, Cast type anodised, extruded section 100 mm long including fixed in repairs all as specified and directed.

Aluminium handles, Cast type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple and fixed in repairs all as specified and directed.

Sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and directed.

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

Kitchen and Cupboard Shutter / cabinet care case of required sizes made out of MDF Board 18 mm thick one side decorative lamination & other side Balancing lamination . The 18 mm thick board shutter / cabinet care case finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed.

Shelf / Partition of Required sizes made out of MDF Board 18 mm thick one side decorative Lamination & other side Balancing lamination consisting of panel 18 mm thick board for supporting the hold of Shelf / Partition finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed.

Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete as per Manufacturers specifications and all as specified and directed. Make : EBCO or Equivalent

100mm Stainless Steel handles rectangular shape polished bright complete all as specified and directed. Make : EBCO or Equivalent

18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

Block board or veneered particle board 18/19mm thick for external teak wood lipping, 6mm thick fixed with nail complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (when open) 40mm complete all as specified and directed.

Aluminium handles, anodised, fabricated type extruded section 75mm long all as specified and directed.

Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, and supply and fix glazing with putty or fixed with beads sheet glass 3mm thick ordinary quality and glazing with oil putty and beads in square not exceeding 0.5 sqm in each pane all as specified and as directed

Fancy type decorative drapery rod 20 mm dia Aluminium Powder Coated including side caps and brackets, as in repairs complete all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description not exceeding 1 sqm each all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each all as specified and directed.

Double action floor spring hydraulically regulated made up of minium 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other pars made up of mild steel heavy duty and fixed in repairs all as specified and directed.

Door closer hydraulically regulated, aluminium extruded section body designation No.1 universal type sutable for door shutters up to 700mm in width and of weight not more than 35Kg and fixed in repairs all as specified and directed.

Powder coated Anodised Aluminium frame for doors windows, ventilators, U channels, safety grill with one or more rebats including jointing cleat for fixing, complete all as specified and directed

Supply and Fix UPVC ventilator frame shall be made of PVC material confirming to IS-10151 the ventilator frame of extruded UPVC section having overall dimensions of 100x62x50mm having wall thickness 2mm+- 0.2mm. Corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame all as specified and directed. Glazing (1) : The ventilator system should be including glazed with 5.5mm thick glass of size as required in ventilatior frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed.

Factory made UPVC white colour sliding window three track, area not exceeding 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (± 0.2mm) window profile with hollow section with multi chamber frame (88mm x 85mm) sliding sash (42mm x 67mm) sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm) Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 (± 0.2mm) thick galvanised steel frame (30mm x 18mm) 2 Nos sliding sash (30mm x 18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware (Touch Lock of zinc alloyed (white powder coated) steel roller system inclusive of stainless stell wire cloth 0.36mm nominal dia of wire and average width of aperture 140mm and required accessories all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.

All as per item No 47 hereinbefore but area exceeding 2.00 Sqm each all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Cleaning of PVC service water tank of capacity 500 Ltrs by using following six stage mechanised cleaning process. (a) Sucking out water from existing PVC tank by using pump. (b) Sucking out of sludge and mud from the tank by using sludge pump (c) High pressure cleaning of walls and ceiling of water tank using 150 bar pressure jet cleaner which shall rid the walls off calcinations, algaes and all contamination. (d) Cleaning and draining up of tank by using industrial vaccum cleaner (e) Antibacterial treatment of internal wall and ceiling of tank by using bio-degradeable antibacterial spray. (f) Finally sterilization and disinfection of tank shall be done by using UV radiation developing from UV radiator to kill any suspended bacteria remaining in the tank. Note: After cleaning the tank, date of cleaning shall be written on the tank by using stencil with synthetic emamel paint all as directed.

Cleaning of PVC service water tank of capacity 1000 Ltrs by using following six stage mechanised cleaning process. (a) Sucking out water from existing PVC tank by using pump. (b) Sucking out of sludge and mud from the tank by using sludge pump (c) High pressure cleaning of walls and ceiling of water tank using 150 bar pressure jet cleaner which shall rid the walls off calcinations, algaes and all contamination. (d) Cleaning and draining up of tank by using industrial vaccum cleaner (e) Antibacterial treatment of internal wall and ceiling of tank by using bio-degradeable antibacterial spray. (f) Finally sterilization and disinfection of tank shall be done by using UV radiation developing from UV radiator to kill any suspended bacteria remaining in the tank. Note: After cleaning the tank, date of cleaning shall be written on the tank by using stencil with synthetic emamel paint all as directed.

Cleaning of PVC service water tank of capacity 2000 Ltrs by using following six stage mechanised cleaning process. (a) Sucking out water from existing PVC tank by using pump. (b) Sucking out of sludge and mud from the tank by using sludge pump (c) High pressure cleaning of walls and ceiling of water tank using 150 bar pressure jet cleaner which shall rid the walls off calcinations, algaes and all contamination. (d) Cleaning and draining up of tank by using industrial vaccum cleaner (e) Antibacterial treatment of internal wall and ceiling of tank by using bio-degradeable antibacterial spray. (f) Finally sterilization and disinfection of tank shall be done by using UV radiation developing from UV radiator to kill any suspended bacteria remaining in the tank. Note: After cleaning the tank, date of cleaning shall be written on the tank by using stencil with synthetic emamel paint all as directed.

Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and of size 20mm dia complete (Minimum weight 210 gms) all as specified and directed.

Dismantling of PVC water tank 500 Ltrs capacity from existing position all as specified and directed.

Dismantling of PVC water tank 1000 Ltrs capacity from existing position all as specified and directed.

Dismantling of PVC water tank 2000 Ltrs capacity from existing position all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 500 Ltrs hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 1000 Ltrs hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 2000 Ltrs hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

Lid for polyethylele water storage tank for 500 litres including fixing PTMT nut/ binding wire and fixed in repairs all as specified and directed.

Lid for polyethylele water storage tank for 1000 litres including fixing PTMT nut/ binding wire and fixed in repairs all as specified and directed.

Gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe including fixed in repairs of size 20mm dia all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia and connections all as specified and directed

Taking up or down steel tubing and connections for 20mm dia and connections all as specified and directed

Supply and laying steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified of size 15 mm bore.

Supply and laying steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified of size 20 mm bore.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Demolition of Cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) light grade polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in skirting/, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 10mm cement plaster as backing coat in cement mortar 1:6 complete all as specified and directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster as backing coat in cement mortar 1:6 on fair face of brick or concrete surface

Granite slab 18 to 20mm thick machine cut, laid over screed bed, bedding and jointed grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:6 all as specified and directed.

Rounding to edges of stone/ granite slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed

Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub floor, sub bases, floors and pavings complete all as specified and directed

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) all as specified and directed.

Brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or PCC block masonry work or concrete surfaces, finished even and smooth without using extra cement all as specified and directed

Vitreous china squatting pan Orrissa pattern size 580mmx 440mm white with integral foot rest with 'p' or 's'trap including flush pipe PVC 32 mm dia, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc, and making good to floors, fixed in repairs, complete all as specified and directed

Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket etc fixed in repairs complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550mm x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling / fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Vitreous China Urinal, Half stall type,white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including flush pipe, grating and union for discharge pipe, and fixed in repairs complete all as specified and directed

Cast copper alloys Chromium plated fancy type Urinal spreader with Auto closing system Push cock ( Urinal Valve) with chromium plated hose pipe fixed suitable for 15mm dia pipe for urinals all as specified and directed.

Vitreous china urinal partition white of size 310x700 mm and fixed in repairs complete all as specified and directed

Single Lever Basin mixer without pop up waste system & 450 mm long braided hoses and fixed in repairs complete all as specified and as directed. Make :- Cat No. KUP - 35011BPM of Jaquar or equivalent

Hand shower 120 mm dia round shape multi flow with cascade effects rubit cleaning system and fixed in repairs complete all as specified and as directed. Make: Cat No.HSH-1731 of JAQUAR or equivalent

Hand shower flexible tubes 12 mm dia & 1.5 m long with nuts and fixed in repairs complete all as specified and as directed. Make: Cat No.SHA-549D12 of JAQUAR or equivalent

Premium wall bracket for hand shower 35 mm dia and 100 mm long round shape and fixed in repairs complete all as specified and as directed. Make: Cat No.SHA-555 of JAQUAR or equivalent

Floor mounted coupled water closet of size 380x660x 765 mm with flushing cistern, with UV soft close seat cover, hinges, fixing Accessories set including S trap and fixed in repairs complete all as specified and as directed. Make: Cat No.LYS-WHT-38751S & LYS -WHT-38201 of Jaquar or techno-commercially Equivalent.

Table top basin of size 485x395x150 mm including waste coupling and waste pipe fixed in repairs complete all as specified and as directed. Make: Cat No.JDS-WHT-25909 of JAQUAR or techno-commercially Equivalent.

Pillar tap, 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed.

Long body bib tap fancy type Chormium plated fixed to 15mm dia in repairs,complete all as specified and as directed. Make :- Cat No. CON-107KN of Jaquar or equivalent

Brass CP Wall mixer for mixing hot & cold water with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges screwed down for iron pipe 15mm dia bore and fixed in repairs complete all as specified and as directed. Make : Cat No. CON- 273KNUPR of Jaquar or equivalent

Stop valves, fancy type, chromium plated with long shank and cup concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed

Chroumium plated fancy type 2in1 bib tap fixed with existing pipe including fixed in repair all as speicified and as directed Make : Cat No. KUP- 35041PM of Jaquar or equivalent

Stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore including fixed in repair all as specified and directed

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 450 mm long and fixed in repairs complete all as specified and as directed. Make: Cat No OHS-35497 of Jaquar or equivalent

Health faucet with 8mm dia, 1m long flexible tube and wall hook with back flow preventer complete fixed in repairs all as specified and directed. Make : CA No ALD-577 of Jaquar

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and fixed in repairs all as specified and directed.

Soap dish complete fixed in repairs all as specified and directed. Make: Cat No ACN-1131N of JAQUAR or Equivalent

Towel ring square/ rectangular with round flange and fixed in repairs complete all as specified and directed. Make: Cat No.ACN-1121N or ACN-1121BN of JAQUAR or equivalent

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

CP toilet paper roll holder complete fixed in repairs all as specified and as directed. Make: Cat No.ACN 1155N of JAQUAR or equivalent

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Gratings 125mm dia with / without waste hole, fixed in repairs complete all as specified and as directed.

Palstic water closet seat, white colour, closed pattern with flat bottom and cover with mild steel chromium plated or aluminized hinging device and fixed in repairs all as specified and directed.

PVC down take pipe 32 mm dia fixed to WHB in repairs all as specified and as directed.

Taking down PVC/ CI pipe jointed in cement mortar, taking out wall and eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) all as specified and as directed

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed.

PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece double, (double Y) equal or un equal of 110mm bore of pipe complete all as specified and directed

PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore of pipe with oval access door complete all as specified and directed

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 at Sunken floor finished smooth and even without using extra cement incl using liquid integral WPC as per manufacturer instructions complete. Note: Supply of Integral water proofing compound will be measured and paid seperately.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including APP based polymeric membrane weighing minimum 3Kg/sqm and minimum 300 thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed.

20mm thick cement mortar 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor all as specified and directed.

40mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, in sunken portion complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

Demolition of Cement Concrete reinforced in any type and remove the debris complete all as specified and directed.

Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, fixed in repairs complete all as specified and directed.

Stainless steel plate track of size 0.9 X 1.2 m complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed

Applying two coats of oil bound distemper over a coat of primer over a coat of wall care putty in two layer, on newly plastered wall surface including preparation all as specified and directed.

Rendering 15mm thick over concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement on stone wall /PCC Block / Brick work and above chajjas all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (conpany Depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new surfaces all as specified and directed.

Preparation of old painted wooden surfaces and wood based materials of any description not other wise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old painted steel surfaces and steel based materials of any description not other wise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old treated wall surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and as directed.

Preparation of old treated ceiling surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying One coat of white wash complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying two coats of Oil Bound Distemper washable over a coat of primer, over one coat of wall care putty 2-3mm thick in two layers including sanding and preparation of surfaces to a true, even and smooth complete all as specified and directed.

Preparation of old plastered surfaces of walls including washing rubbing down and stopping of distempered / painted surface and applying One coat of distemper Oil emulsion washable on old surfaces on walls including filling and making surface smooth making good chipped off surfaces as required complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed

Removal of excavated surplus soil not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point and all as specified and directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 and pointing the dressed surface with same mortar as the work proceeds all as specified and directed.

Extra over stone walling for Granite or Trap stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm all as specified and directed.

Keyed pointing to random or polygonal rubble masonry uncoursed or brought upto courses in cement mortar (1:4) all as specified and as directed.

UPVC SWR pipe single socketed in any length with rubber ring joint 100mm dia as in weep holes all as specified and directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate as in coping and the like including necessary form work all as specified and directed.

Removing demolished / dismantiled materials etc to a distance of 200m or under, beyond the lead included in the rates, including loading and stacking at the destination complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, on chajjas and wall cladding fixed with self tapping screws all as specified and directed.

Taking down complete of existing water proofing treatment of any description over roof slabs / parapets etc complete all as specified and directed.

Demolition of cement Concrete of any description and in any position including padding concrete and removing debris all as specified and directed.

Providing Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate average thickness 50mm as in levelling / padding course on roof slab, projections on similar surfaces existing with slope making the surface even and smooth without using extra cement all as specified and directed.

Rendering 10mm thick fair faces of brick work or concrete surface in cement mortar 1:3 laid over the RCC roof slab, parapet wall when the concrete is green at any height and making the surface fair and even without using extra cement including using liquid integral water proofing compound as per manufacturer's instructions all as specified and directed. Note: Water proofing compound will be measured and paid separately.

APP modified prefabricated polymeric water proofing membrane mineral finish 4mm thick and weighing not less than 4.5 kg/sqm reinforced with non-woven polyester matt black finished weighing not less than 100 gm/sqm having softning point less than 140 degree celcius longitudinal tensile strength not less than 300N/sqcm, side lap 10cm with torch application of membrane over compatible primer at 0.40 Ltr/sqm and aluminium paint at 0.10 kg/sqm finished on top complete all as specified and directed.

Plain cement concrete Type B1 1:2:4 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets and frame work all as specified and directed.

GI frame work for grid of size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

12 mm thick Gypsum Board in ceiling fixed with screws as per manufacturers instructions all as specified and as directed.

Applying two coats of distemper oil emulsion on ceilings over priming surfaces with alkali resistant priming paint over one coat in two layers of putty including preparation of surfaces complete all as specified and as directed.

PVC insulation pannels 10mm thick with EPS stuck to 1mm printed PVC sheet suitably placed in and including false ceiling grid made of aluminium / G.I / MS all as specified and as directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No 173 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 173 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 173 hereinbefore but point wiring complete with 4 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC casing and caping complete with fittings/ accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light /Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No.177 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 177 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 177 hereinbefore but point wiring complete with 4 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Material and labour for Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modular switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any and cutting chases will be deemed included in the item rate.

All as per Item No 181 hereinbefore but One 3 pin 5 Amps socket out let on independent Board all as specified and directed.

All as per Item No.181 hereinbefore but point wiring complete with 4 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

All as per Item No.181 hereinbefore but point wiring complete One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

Bell Multi Music type 230 volts single pole all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular Bell push 6A 230V, AC 50 Hz SP One module all as specified and directed.

Modular White Cover Plate with Frame 1 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 2 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 3 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 4 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 6 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 8 module all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 4 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 8 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 203. hereinbefore but SPN 230V 32 Amps capacity all as specified and directed.

All as per item No. 203. hereinbefore but MCB TPN 415V 40 to 100 Amps capacity all as specified and directed.

Emergency LED bulb operating voltage 120-300 V AC IP 20 wattage 9 CCT 6500K lumen output 900 (Main) 350 (Battery) 4hr backup B-22 holder type all as specified and directed. Make: Luker Product code- LBGB09CL or equivalent techno commercial make.

Taking down old unsv FTL fittings, Supply and fix 20W LED batten light Lum output 2000 CCT 6500K Size 4 Feet comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make: Luker Product code- LT520P or equivalent techno commercial make.

All as per item No 207 hereinbefore but 2 feet, 10 watts all as specified and directed. Make: Luker Product code- LT510P or equivalent techno commercial make.

Octave LED bulk head light fitting 12 W 6500K lumen output 1080 including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make: Luker Product code- LBKOCTV12 or equivalent techno commercial make.

Round shape 18 watt 220 volts AC 6500K lumen output 2400, 20 cm dia x 3.1 cm rimless surface panel type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Luker Product code- LNPSRR18 or equivalent techno commercial make.

LED dimmable LED panel size 595mmx595mm, 40watt, 6000K, 100 Watts/ Luman, 220V AC surface mounted type with high efficiency PMMA diffuser soft glare free light coplete with drivers, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Luker Product code- LPSD40 or equivalent techno commercial make.

Taking down old unserviceable post top light fittings and supply and fixing of aesthetically designed IP65 B22 holder without lamp gate light luminarie of spun aluminium top cover, aluminium heat sink, frosted polycarbonate diffuser and die cast aluminium complete all as specified and directed. Make: Luker Product code- BLAZE B4 or equivalent techno commercial make.

Taking down unserviceable building security light and Material and labour for LED (street) Security Light fitting of 20 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 66 complete with all accessories and lamp colour white all as specified and directed. Make- Luker Product code- LSTE-20 or equivalent techno commercial make.

GI Pipe Medium Grade 40 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers including taking down old brackets complete all as specified and directed.

Taking down old unserviceable geyser and Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed. Make: V Guard/ Bajaj/ Racold

PVC connections 15mm size with PTMT nuts of length 300mm all as specified and directed.

Takingdown unserviceable Plug and socket and Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20A SP MCB all as specified and directed. Make-Legrand/ABB/Havells

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

All as per Item No 218 hereinbefore but in and including casing caping all as specified and directed Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

All as per Item No 220 hereinbefore but in and incl casing caping all as specified and directed Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making opening brick/ ston Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed. Make: Khaitan/Havells/Bajaj

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm including making opening brick/ ston Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed. Make: Khaitan/Havells/Bajaj

AR Mohamed Yakub and Co

GMS Builders

GUNASEKARAN AND CO