REPAIR AND MAINTENANCE TO EXTERNAL SERVICES LIKE PATHS HARDSTANDING COMPOUND WALL FENCING AND CERTAIN MISC B AND R WORKS AT VRDE AHMEDNAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level unreinforced complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level unreinforced complete all as specified and directed.

M & L for 75 mm thick PCC (1:2:4) type B2 using 40 mm graded stone aggregate as in hard standing finished even and smooth without using extra cement all as specified and directed.

M & L for hardcore of broken stone or boulders of guage exceeding 63 mm but not exceeding 100 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled/rammed to a true surface all as specified and directed.

Supply only broken glass beads of size 60 to 80 mm (approx) fixed in plinth protection below concrete all as directed by Engr-in-Charge.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in plinth protection finished even and smooth using extra cement complete all as specified and directed.

M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

M & L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base of floor finishes complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in floor finishing complete all as specified and directed

M & L for 20 mm thick sand cushion spread, levelling in layers not exceeding 25 cm thick including watering etc complete all as specified and directed

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 with grey cement and pigment of 60 mm thickness M-35 grade complete all as specified and directed.

M & L for Reinforced cement concrete RCC M-25 as in chajjas complete all as specified and directed

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors/terraze etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer for laying floor/terraze tiles in CM (1:6) complet all as specified and directed.

Excavation in post holes each not exceeding 0.50 cum getting out, returning filling and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 mtr and making good surface in hard/dense soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation or for manholes etc not exceeding 10 sqm on plan and not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming layers not exceeding 25 cm thick soil complete all as specified and directed.

Removing of surplus excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

M & L for PCC (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and directed.

M & L form work to sides of concrete foundations, footings, rafts, plinth beams etc of rough finished surfaces of flat complete all as specified and directed

M & L form work to sides of concrete columns, pillars etc of fair finished surfaces of flat complete all as specified and directed

M & L for reinforced cement concrete nominal mix type B1 1:2:4 using 20 mm graded stone aggregate as in foundation footings, beams of columns etc complete all as specified and directed.

M & L for reinforced cement concrete nominal mix type B1 1:2:4 using 20 mm graded stone aggregate as in columns, pillars, piers, posts etc complete all as specified and directed.

M & L for granite tile/slab of size 600 x 300 x 12 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including nosing, grinding and polishing complete over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F rolled mild steel joist, channel, angle or tee sections fixed without connecting plates etc quality confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed

S & F rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe-410 S with gusset plates, rails braces etc complete drilled and fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

M & L for precast reinforced cement concrete type B0 using 12.5 mm graded stone aggregate in 35 mm thick jallies or loures including all mouldings complete and set in cement mortor 1:4 all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of stone masonry surfaces other than fair faces of brick or concrete surfaces in CM 1:6 finished the surfaces even and fair without using extra cement complete all as specified and directed.

M & L for newly prepared plastered surfaces of any description and applying two coats of cement based paint over a coat of chalk whitening primer on wall surfaces complete all as specified and directed.

M & L mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M & L mild steel TMT bars 5 mm to upto and including 10 mm dia cut to length, bent to shape required as in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts etc including provision of binding wire complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortor including all quoins, arches, pillars etc but excluding ashlar facings and dressed stone work complete all as specified and directed.

M & L walling of randam rubble uncoarsed, well bonded and solidly hearted built in cement mortor (1:6) complete all as specified and directed.

M & L walling of randam rubble uncoarsed, well bonded and solidly hearted built in cement mortor (1:6) but except stone complete all as specified and directed.

M & L keyed pointing to randam or polygonal rubble uncoarsed or brought upto courses in cement mortor (1:4) complete all as specified and directed.

Dismantling mild steel work, wire and coil work of any description not otherwise provided for complete all as specified and directed.

S & F mild steel angle posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire etc) including all necessary drilling, bolting or rivetting etc, and similar work confirming to Fe-290 Grade E-165 complete all as specified and directed

S & F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia of barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to angle fencing above compound wall and any type, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. (each line of wire to be measured).

S & F in repairs galvanised concertina coil, 1050 mm dia (50 spirals per coil) weight approx 14.50 Kgs (+-5%) expandable 10-12 mtrs consisting of 2.60 mm dia heavy galvanised high tensile spring steel wire as per IS-4454, barb (barb length 24+1 mm pitch between two barbs 35+1 mm ) made of 0.50 mm thick low carbon heavy galvanised cold rolled steel sheets as per IS-513, heavy duty steel clip as per IS-2062 complete all as specified and directed.

M & L for preparation of newly prepared steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

M&L for 18-20mm thick Granite (any type, any colour) work (table rubbed and polished) in vertical surfaces such as dado, skiting etc including 10mm thick backing coat in CM (1:4) including admixture of pigment to match with shade of granite all as specified and directed.

ASHUTOSH BUILDERS (BID ID -3157211)

A B S ENTERPRISES (BID ID -3157208)