SPECIAL REPAIRS TO BUILDING NO P-04 (Cook House) AT

Amount

Demolition of PCC in Ground Floor and paving n exc 15 cm (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Dismantaling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge.

M&L for PCC type D2 1:4:8 using 40mm graded stone aggregate, 75 mm thick as in sub base for floors,complete all as specified and directed by Engr-in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x300x7 mm thick on vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm backing coat in CM1:3 including complete all as specified and directed by Engr-in-Charge.

M&L Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including screed bed 15 mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.and black complete all as specified and directed by Engr-in-Charge.

M&L for Hand Cut Kota stone flooring 20-25mm thick incl for cuttting and polishing by machine over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including provision of 20 mm thick screed bedding in CM (1:6) complete all as specified and directed by Engr-in-Charge.

Machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting,dado,and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including provision of 10 mm thick backing coat of CM (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed by Engr-in-Charge.

Drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stone for gas connection pipe complete all as specified and directed by Engr-in-Charge.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F PVC waste pipe 50 mm dia for sink complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in plinth protection finished even and smooth complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on walls and roof ceilings etc., including racking out joints, hacking for key, scrubbing down with water etc. to receive new plaster complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed by Engr-in-Charge.

M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including 3mm thick wall care putty on wall complete all as specified and directed by Engr-in-Charge.

M&L Finishing wall with Acrylic emulsion smooth exterior paint of reqd shade, new work (two or more coat) applied @ 1.67 Ltr/10 Sqm over and incl priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete.

M&L for Complete removal of existing treatment of wall surfaces and applying two coats of oil bond distemper over one or two coats of putty including one coat of primer all as specified & directed by Engineer-in- Charge.

M&L for Complete removal of existing treatment of applying a three coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

Taking down Chowkat or frames with shutters (with out taking off shutters from the frames) area n exc. 1.50 Sqm each and removing to store complete all as specified and directed by Engr-in-Charge.

Taking down Chowkat or frames with shutters (with out taking off shutters from the frames) area exc 1.50 sqm and n exc 4.00 sqm complete all as specified and directed by Engr-in-Charge.

Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engr-in-Charge.

Second class HW rail and style plain frame factory made moulded panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veeneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

M&L for II nd class hard wood Glazed and skeleton shutters, 30 mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F Factory made Box Type steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay , complete without glazing bars, dovetailed or complete all as specified & directed by Engineer-in-Charge.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane complete all as specified and directed by Engr-in-Charge.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.50 sqn in each pane complete all as specified and directed by Engr-in-Charge.

S&F mild steel butt hinges minimum weight 100mm size. Mild steel cold rolled as specified & directed by Engineer-in-charge.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy , anodised sliding door bolt 300 mm long with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

Preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Preparation of new Steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks and removing to store capacity of tank exc 500 and n exc 1000 ltr) and Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity complete all as specified and directed by Engr-in-Charge.

S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors including Taking up or down steel tubing and connections of 15 mm diameter complete all as specified and directed by Engr-in-Charge

Ditto all as per item No- 39 here in before but 20mm dia pipe complete all as specified and directed by Engr-in-Charge

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe complete all as specified and directed by Engr-in-Charge

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe complete all as specified and directed by Engr-in-Charge

S&F in repairs for stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs complete all as specified and directed by Engr-in-Charge

S&F in repairs bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed by Engr-in-Charge

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let complete all as specified and directed by Engr-in-Charge

PVC (SWR) multi floor trap with grating including jointing with solvent cement 100 mm dia out let complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) bends with access door of 110 mm dia, any radius complete all as specified and directed by Engr-in-Charge

S&F PVC(SWR) bends with access door of 75 mm dia, any radius complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) bends of 75mm dia, any radius complete all as specified and directed by Engr-in-Charge

S&F in repairs Viterious china White Wash Hand Basin of fixed in repairs includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long complete all as specified and directed by Engr-in-Charge

Demolition of stone/ boulder masonry and built in cement mortar all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge.

M&L for 80 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size conforming to IS 15658-2006 of M-35 grade including even spreading of 25mm thick layer of sand cushioning incl watering & consolidation all as specified. all as specified and as directed by Engr-in-charge

Taking down carefully point wiring of any type (i.e. on wooden batten, surface conduit, casing-N- capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc. including accessories such as wooden gutties/rawal plug, screw etc including making good disturbed surface to match the existing surfacecomplete all as specified and directed by Engr-in-Charge

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed by Engr-in-Charge

M&L for point wiring with PVC unsheathed cable single core stranded copper conductor 1.5 sq mm size, 1100 V grade, drawn into casing & caping (ISI marked) not less than 20mm dia on surface with and including PVC unsheathed cable single core copper conductor 1.5 Sq mm as continuous earth wire and including pressed MS sheet sunk in box 1.12 mm thick with 2.8 mm thick laminated bakelite sheet all as specified & directed by Engr-in-charge for the following :-

(a) One light/fan/Exhaust fan point controlled by one switch 5 Amp one way

(b) -Ditto- all as per item no 61 but socket outlet 3pin 5 amps same board

(c) -Ditto- all as per item no.61 but socket outlet 3pin 5 amps independent board

-Ditto- all as per item No.61 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

S&F Modular white cover plate with frame ( both inner plate & outer plate cover ), 1 module.

S&F in repair Modular white cover plate with frame ( both inner plate & outer plate cover ), 2 module

S&F in repair Modular white cover plate with frame ( both inner plate & outer plate cover ), 3 module

S&F in repair Modular white cover plate with frame ( both inner plate & outer plate cover ), 4 module

S/F modular white cover plate with frame, 6 module

S&F repair Modular metal flush box 1 & 2 module

S&F repair Modular metal flush box 3 module

S&F repair Modular metal flush box 4 module

S&F repair Modular metal flush box 6 module

S&F repair Modular switch one way 6 Amp single pole & one modular.

S&F Modular socket 6 Amp 2/3 pin combined shattered ISI marked confirming to IS 1239 : 1997 having finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified and directed by Engr-in-Charge

S&F Modular socket 16/6 Amp 3 pin combined shattered ISI marked confirming to IS 1239 : 1997 having finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified and directed by Engr-in-Charge

S&F Modular switch 16 Amp single pole one way ISI marked confirming to IS 3854 : 1997 or latest IS having finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified and directed by Engr-in-Charge

S&F Electronic type modular fan regulator step type 120 watt, 230 volt. module

M&L Sheet Modular metal enclosure DB TPN 415 Volt 4 way double door type with 200 Amps rated bus bar for fixing MCB complete all as specified and directed by Engr-in-Charge

M&L Sheet Modular metal enclosure DB SPN 240 Volt 8 way double door type with 200 Amps rated bus bar for fixing MCB

M&L MCB SP 240 volts, 5 to 32 Amps, 10 KA

M&L MCB SPN 240 volts, 5 to 32 Amps, 10 KA

M&L in repair Lamp holder PVC polycarbonate type with back plate suitable for battern fittings

S&F in repair LED 11 watt make Philips/Bajaj/Wipro

S&F in repair Ceiling rose, 3 phase/PVC/polycarbonate, isolated body

S & F LED tube fixture/fitting 1x 20watt, decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy eficient ready to use prewired for including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed by Engineer- in Charge.”. Make: Havells/Philips/Bajaj/CG.

S & F reapir LED building Security light fitting 1x18watt with polycarbonate housing ,Aluminum gear tray duly prewired inbuilt LED module IP 65 Protection complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS,FI clamp including plinth with nut bolts etc complete all as specified and directed Make: Crompton Greaves Cat part no LPFC-18-CDL or Equivalent make of Havells/Philips.

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 5 of MES SSR Part-I 1991 print and as directed .

Supply and fix cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core complete all as specified and directed & directed by Engineer-in-charge.

Excavation in trenches not exc 1.5m wide and n. exc 1.5M deep for fdn / trenches and getting out for soft / loose soil complete all as specified and directed by Engr-in-Charge

Removing excavated material any type n exc 50m and depositing at a level n.exc 1.5M above ground complete all as specified and directed by Engr-in-Charge

Returning/filling in layers, spreading leveling, watering and well ramming in layers n.exc 25m in sof/loose soil complete all as specified and directed by Engr-in-Charge

M&L for sand cushioning to PVC cable with tibba sand and punning to provide required cover complete all as specified and directed by Engr-in-Charge

Supply and laying Jodhpur stone patti for cable protection of lenth between 55 to 60 cm but width between 25 to 30 cm thicknes not less than 5 cm complete as per site requirement incl removing old unsv patti complete all as specified and directed by Engr-in-Charge

rathore construction co.