ADDN ALTN ALONGWITH REPAIRS TO BLDG NO P 108 SINGLE OFFRS ACCN AND CONSTRUCTION OF STEPS FOR SEATING IN SMR DSTSC AND INSTALLATION OF NIGHT LED SIGN BOARD AT MILIT GIRINAGAR PUNE 25

Amount

ADDN/ALTN ALONGWITH REPAIRS TO BLDG NO P-108 (SINGLE OFFRS ACCN) AT MILIT GIRINAGAR M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry including dismantling single layer Manglore pattern or similar tiles in roofing including dismantling of existing old U/s roof tiling and removing rubbish off the premises complete all as specified and directed.

M&L for Ridges or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 etc complete all as specified and directed.

M&L for 2nd class hardwood, clean sawn, in scantling timber work incl. dismantling of old U/s scantling and removing rubbish off the premises all as specified and directed.

Dismantling battens for tiles, shingle etc. of any size including tilting fillets spaced exc. 15 cm complete all as specified and directed.

M&L 2nd class hard wood clean sawn battens at 30 cm spacing having sectional area exc. 5 and not exc.15 Sqcm complete all as specified and directed.

All as per item 05.00 here in befor but fixing only complete all as specified and directed.

M&L for Eaves/weather boarding with 20mm thick fibre cement board (Non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fibre tape as per manufacturer's instructions complete of approved arch pattern, size, colour and shape including dismantling of old boarding/eaves board fixed in any position complete all as specified and directed. Make:- V-Board (Vishaka Indurstires Ltd)/Everest/Charminar/Ramco.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and directed..

M&L 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screws in roofs, walls with grade of zinc coating 275 complete all as specified and directed.

All as per item No. 9.00 here in above but fixing only except sheeting complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coat of creosote oil complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer including preparation of new/old painted wood surfaces complete all as specified and directed.

S&F 18mm thick, prelaminated both side cement bonded particle board area to be of wood finish teak shade and conforming to IS-142-1995. The composition of the boards shall comprises of approximately 60% Cement, 30% plantation wood (remaining being other chemical/water binders etc.) with a density of approximately 1250-1300Kg/M3, including fixing with scews to Wooden frame work for doors, partitions, cabinets, cupboards, Shelve, etc. complete all as specified and directed. Note:- All Bison panels are to be fixed by self threaded machine screw, 25/38mm as per requirement and all as directed.

M&L for Grinding & polishing of existing old Kota stone floor/skirting/staircase with sufficient number of grinding rounds and finally bees-wax polishing on surfaces of any descripion, width or girth including cleaning and preparation the existing surface complete all as specified and directed.

S&F continous (piano) hinges 30mm width of flaps (when open) brass, bright finish complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) , exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed.

M&L for rendering 15mm thick on brick, stone or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and directed..

M&L for rendering 15 mm thick on brick, stone surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified & directed.

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling complete all as spescified & directed.

M&L for applying two coats of acrylic emulsion paint (lustar paint) internally over a coat of acrylic primer over 2mm thick coat of waterproof putty in two layers on old or new plaster surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of ceiling complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on Old surfaces of ceiling complete all as specified and directed.

M&L for finishing wall with textured interior paint of required shade : New work (Two or more coats applied @3.28 ltr/10 Sqm) over and including priming coat of interior primer applied @ 2.20kg/10 Sqm complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over new or old surfaces of wall including necessary scaffolding required for painting work, safety measures etc all as directed.

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames of wooden or steel window/ventilator not exc 1.5 sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F solid PVC frame (single rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 feet metal CSK screws complete all as specified and directed. Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

S&F factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40x 20x 19 of MS pipe as stiffner and supplying and fixing in frame at site complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105X60mm ccomplete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as in filling steel frames etc. incl necessary form work complete all as specified and directed.

M&L for 40mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete all as specified and directed.

M&L for factory made 35mm thick 2nd class H/wood Glazed and skeleton shutters, open rebated and prepared to receive 12mm thick toughened glass, gauge etc. (with sash bars) edges of ramming plain, chamfered or rounded, fitted with cut of and mitred beads for securing glass, gauge etc of size of members of shutters as specified in SSR Part-I section 8 clause No. 8.2(a) and fitted to chowkats complete all as specified and as directed.

M&L for 12mm thick clear toughened glass fixed to door and window as directed by Engr-in-Charge including necessary wooden beadings, nails, screw complete all as specified and directed.

M&L for 12mm thick plywood, grade BWR, type BB, fixed with screws to wall as in palmet box including fixing to wall complete all as specified and directed.

S&F 25mm dia stainless steel chroumium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for 18mm thick particle board, medium density, flat pressed single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cupboard complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia wire & average width of aperature 1.18mm complete all as specified and directed.

S&F Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

M&L for 100mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed.

M&L for 125mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed.

M&L for brass, 4 levers mortice lock, vertical type with handle complete all as specified and directed.

M&L for door viewers eye brass 75mm complete all as specified and directed.

S&F for 300mm long brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F for 125 mm long stainless steel chromium plated door stopper fixed to door bottom rail complete all as specified and directed.

S&F 150mm brass handles, cast type, polished bright complete all as specified and directed.

S&F 200mm long decorative brass barrel tower bolts, with cast or sheet barrel and rolled and cast bolts fixed complete all as specified and directed.

M&L for 0.9mm thick decorative laminate type1 of surface finish, colour and pattern as approved by Engr-in-charge, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered or riveted or gorged into spikes framed guard bars barred to windows, iron door,ladders framed balusters, walk ways, railing, frame work for water tank and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. all as per manufacutrer's instructions and as directed. ( Make : Armstrong, saint Gobain)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.

M&L for Non Skid Ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 300mm x 450mm x 7mm as in dado/skirting etc. and joineted neat in cement slurry and pointed in white or colour cement to match over with and including 10mm thick screed bed in CM 1:4 complete all as specified and directed..

M&L dark shade ultra charged vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles exc. 0.36 sqm but not exc 0.42 sqm as in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L dark shade ultracharged vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles exc. 0.36 sqm but not exc 0.42 sqm as in skirting/vertical surfaces etc. and joineted neat in cement slurry and pointed in white or colour cement to match over with and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for granite 18mm thick black/red colour (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium anodised powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc. complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with not exc.0.5 Sqm in each pane to aluminium frame work for ventilators complete all as specified and directed.

S&F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, fixing as in kitchen shelve (horizontally and vertically) including necessary cutting to wall, floor and making good in CM 1:4 complete all as specified and directed.

M&L for Two coats of french polishing on old wood surfaces of any description, width or girth including cleaning and preparation the surface complete all as specified and directed.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed.

M&L for cement concrete type B1,1:2:4 (using 20mm graded stone aggregate) as in bed block, kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on new/old steel surfaces exc 10 cm width or girth etc complete all as specified and directed.

S&F Stainless steel fancy chromium plated 25mm dia as in curtain rods including fixing with necessary brackets to palemet box all as specified and directed.

S&F Stainless steel chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc. complete all as specified and directed.

S&F stainless steel chromium plated 6 Pin, 45 Cm to 60 Cm long hanger fixed to wall with screws complete all as specified and directed.

S&F readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make:Easy dry or equivalent and approved by EIC.

M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed.

M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with and approved water proofing compound @ 3% weight of cement and applying two coats of Roff Hyguard EX Rezone Chemicals or equivalent make complete all as specified and as directed.

M&L for PCC 1:5:10 type C-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed.

S&F in repair Vitrious china wash down water closet pan (pedestal pattern), any colour with and including and fixing bolts, seat cover, 10ltr capacity PVC flushing cistern and flush pipe complete all as specified and directed.

S&F in repair Table top Wash hand basin, vitrous china, coloured flat back of size 540mm x 360mm x 115mm to 150mm mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type swan neck pillar taps, cast copper alloy chromium plated fancy type fixed complete all as specified and directed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs long body Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and directed.

S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and directed.

S & F stainless steel grating doom 125mm dia complete all as specified and directed.

S&F Chromium Plated Toilet Paper Holder all as specified and directed.

S&F sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make - Jaguar,Cera.

S&F in repair 125mm chromium plated shower roses with shower arm with or without swivel joints, any size including fixing to UPVC/Steel pipe complete all as specified and directed.

S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and directed. Make Jaguar/Cera.

S&F Chromium plated Jet Spray with CP connection pipe for EWC 15mm bore with fittings complete all as specified and directed. Make Jaguar/Cera.

S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for UPVC/iron Pipe complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen with plugs, washers and waste coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm including waste pipe complete all as specified and directed.

S&F in repairs Brass CP mixer including connection pipes for mixing hot or cold water screwed down for UPVC/iron pipe and fixed complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia including brackets both side complete all as specified and directed.

S&F brass chromium plated bracket for towel rail complete all as specified and directed.

S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all specified.

S&F for steel water tubes, 20mm bore medium grade, galvanized with and including all fittings and fixed complete to walls, ceiling or laid in floor, complete including taking up or down U/s steel water tubing and connections or removal to store all as specified & directed.

All as per item 96.00 here in befor but 15mm complete all as specified and directed.

M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as specified and directed.

S&F 1000 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 25mm high pressure with polythene float and fly nut complete including dismantling of existing U/s water tank and removing to store complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, floor of size 110mm bore including taking down old pipe complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, floor of size 75mm bore including taking down old pipe complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and directed.

S&F PVC (SWR) bends with access door of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) brach piece, single (single Y) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) brach piece, single (Single Y) equal or unequal 75mm bore complete all as specified and directed.

S&F PVC (SWR) brach piece, double (Double Y) equal or unequal 75mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

S&F PVC (SWR) gully traps 125/100mm setting and jointed in cement solvent complete all as specified and directed.

Complete removal of entire existing water proofing treatment in any position including tarfelt, Plaster, lean concrete of any thickness, gravels etc. and removing the debries out side MD land complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for seprately as "Supply Only"

M & L for APP based polymeric membrane minimum weight 3 Kgs/Sqm and minimum 3 mm thick reinforced with polyster non-woven fabric ( wt not less than 150 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm and finishing with preventive coat with aluminium paint @ 100ml/sqm all as directed and specified including vertical surface complete all as specified and directed.

M&L for cutting grooves in brick wall, Stone wall & concrete wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 including fixing of APP based polymeric membrane complete all as specified and directed.

Supply only WPC complete all as specified and directed.

SPECIAL ITEMS OF B/R WORKS S&F for Modular kitchen cabinet and wall mounted cabinet comprising of with and including necessary all other fixing arrangement and screws as per requirement at site etc. All cabinet made of 18mm thick glossy/matte finish solid waterproof MDF board and outer side and top side shall be of 18mm thick prelam coloured solid MDF board, for fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge.

S&F 12mm thick glossy/Matte Finish solid waterproof MDF board for kitchen wall cabinet back side and etc. comprising of with and including necessary all other fixing arrangement as per requirement at site. For fixing the items fitted in position to wall minimum screws size 120mm complete all as specified and directed by Engr-in-Charge.

S&F for stainless steel gril pattern Bottle Rack size 8"wide and 20" deep including stainless steel channels of make Hettich,Godrej or Hafale. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm fixing the items fitted in position and complete all as specified and directed. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern basket of size 21"x4"x20" deep including stainless steel drawer channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern basket of size 21"x6"x20" deep including stainless steel drawer channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern basket of size 21"x8"x20" deep including stainless steel drawer channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel perforated cuttlery box of size 21"x4"x20" deep and including stainless steel drawer channels of make :- Hettich, Godrej or Hafale. Thickness of stainless steel sheet be 1mm thick, fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern Grain Trolley with base of size 21"x24"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern Plate rack of size 21"x8"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern Cup and Soucer rack of size 21"x6"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F chromium plated auto hinges split box type overlay door mounting option, opening angle 110degree fixed, with screw all as specified and directed by Engr-in-Charge. Make :Kea SCH or Hettich.

S&F 100mm long stainless steel decorative cupboard handles fixed with nuts, screws and washer complete all as specified and directed.

S&F for Cupboard magnet of size 50mm including high quality magnet and steel plate complete all as specified and directed.

M&L for 304 grade stainless steel frame work for fixing of modular kitchen below kitchen platform including necessary welding, fixing in true level and position as per availability of size below kitchen platform complete all as specified and directed by Engr-in-Charge.

EXTERNAL SERVICES OF B/R SERVICES (FENCING/GATE/COMPOUND WALL) Dismantling of Mild steel framed work as in gates, doors, fencing post etc. but excluding framed truss, complete all as specified and directed.

M&L for framed MS work as in doors or gates of angle or other section with gusset plates, rails braces etc, complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete all as directed and complete with locking arrangement complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.50 cum gettign out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil complete all as specified and directed.

M&L cement concrete in foundation type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

M&L for mild steel angles as in post and struts in fencing incl cutting tops and shape as directed incl drilling holes, notching for wire etc conforming to Fe-410W (Gde E-250) etc of any description complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type and type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Supply only MS galvanished chain link fencing with 3 mm dia and size 50 mm x 50 mm including line wires including strain bolts, binding wire etc complete all as specified and directed.

S&F round bars 10mm dia ( Fe 410 W gde E 250) and over, cut to length, bent to shape required,including binding and welding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F mild steel flat iron (Fe-410-0 or Fe – 310 –0) as in bands / straps / rails for chain link fencing cut required length including necessary drilling holes for fixing bolts complete all as specified and directed.

M&L for mild steel bolt factory made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square not exc 5cm long end dia neck 11 to 15mm etc complete all specified and directed.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on steel surfaces exc 10 cm width or girth etc complete all as specified and directed.

Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation etc and getting out in soft / loose soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate), exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

Returning filling in, well watering ramming in layers not exceeding 15 cm thick complete all as specified and directed.

Removing of excavated soil to a distance not exc 50 mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed.

M&L for rendering 15mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10mm thick on cement concrete block masonry/concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/New surfaces of wall including necessary scaffolding required for painting work, safety measures etc complete all as specified and directed.

M&L for cement concrete type B1,1:2:4 (using 20mm graded stone aggregate) as in kerb, bed block, mud stop, slightly rounded or champhered on edges, coping, complete all as specified and directed.

EXTERNAL SERVICES OF B/R WORKS (PATH HARDSTANDING) Surface excavation n.exc 30cm deep and average 15cm and getting out in soft/loose soil complete all as specified and directed.

Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type B2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for coloured glossy finish chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and no pigment, set and jointed and pointed in neat cement slurry in floors with over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Removing of excavated soil to a distance not exc 50 mtrs and depositing where directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.

M&L for cement concrete type B1,1:2:4 (using 20mm graded stone aggregate) as in kerb, bed block, mud stop, slightly rounded or champhered on edges, coping, complete all as specified and directed.

E/M PORTION (INTERNAL ELECTRIFICATION) Taking down carefully aluminium / copper point wiring complete (light, fan socket & power) including unserviceable fixtures and fittings such as switches ceilimg roses pendents regulators sockets light fittings etc complete removing material for taking credit & making good disturbed wall / floor etc complete all as specified and directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, acomplete all as specified and directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box , modular cover plates with frame mounting for housing the switches, socket outlets etc, complete all as specified and directed. (a) One light point controlled by one way switch.

(b) One light point controlled by Two way switch.

(c) One fan/exhaust fan point controlled by one switch and one regulator.

(d) One bell/buzzer point controlled by one bell push button on independent board.

(e) One 3 pin switch socket outlet point 5 Amps on independent board.

(f) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No 161.00 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch 1 way 6A, 1 module

S & Fix modular switch 2 way 6A, module

S & Fix modular switch1 way 16A, 1 module

S & Fix modular socket out let 6A 2/3 on combined 2 module

S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module

S & Fix Ceiling rose surface backlite 65x50mm, 3 terminals complete all as specified and directed.

S&Fix fan regulator electronic 2 modular type volts AC 50 HZ ,300 Watts,4step complete all as directed.

S & Fix Bell push modular type SP 6 Amps.

S & Fix call bell (Ding Dong) 240 V, 50 Hz

S & Fix Regal Batten General purpose industrial compact batten suitable for single or twin LED Tubelight with integral LED driver, available in single / double side connection CRCA batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specifed and directed . Make - Havells. REGALBATTENT8UPTO1X22WSSBSWH or equivalent in Crompton/Wipro/Philips

S & Fix Photon Ultra Plus 2.0 Tubelight <10% Ultra bright LED Tubelight (single side connection) with very high efficacy >=115 lm/W & THD<10% suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light with necessary fixing arrangement etc complete all as specifed and directed. Make-Havells: PHOTONULTRA2.01213T8SSTL18WLED865SPC or equivalent in Crompton/Wipro/Philips

S&F LED Tube light fitting 10 watt, 230 volts, sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces complete with all accessories all as specified & directed. Make. Make-Havells-ENDURALINEARNEOBS10WLED865SPCSS or eqvt in Crompton/Wipro/Philips

Taking down the defective ceiling fan / Exhaust fan of any sweep and make after disconnecting electricity & mechanically and examine & carry out the servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of painting re-fixing, testing in all respect for smooth running complete all as specified and directed.

S&F exhaust fan, AC, single phase, 240 V, 230 mm sweep, metal body with metal blades metal louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan complete all as specified and directed.

Taking down the existing unserviceable Geyser and after disconnecting electricity & mechanically and examine & carry out the servicing/overhauling the geyser by thoroughly cleaning the tank, thermostat, heating element and LED Lamp indicator, testing in all respect for smooth running and refixing complete all as specified and directed.

S&Fix MCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e complete all as specified and directed. Make : Legrand or eqvt make of ABB/Siemens

S & Fix of MCCB Four pole, 415 volts, 63 Ampere, rupturing capacity 16 KA, complete all as specified and directed.

S & Fix of MCB TP pole, 415 volts, 32 Ampere, rupturing capacity 16 KA, complete all as specified and directed.

S & Fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix Metal plug and socket DB's with MCB 20A SPN.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping with its accessories all as specified and directed by Engr-in -charge for the following (a) 2x4.0 sq mm and 1x4 sq mm as earth wire

(b) 2x6.0 sq mm and 1x6 sq mm as earth wire

Taking down the existing electric meter of Single Phase/ Three phase any capacity and make after disconnecting electricity and carry out the cleaning and refixing, reconnecting including applying one coat of paint on existing ms box of electric meter testing in all respect fo smooth running complete all as specified and directed..

M&L for earthing complete with galvanised steel earth plate electrode 600mm X 600mm X 6 mm thick buried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less that 1.5M below normal grounded level connected to GI earth wire 4 mm dia by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 03 of SSR Part-I connected to earthing test point / DB including excavation / earth work in any type of strata, removal of surplus earth, GI pipe for watering pipe with and funnel, PCC 1:3:6 Type C-1 chamber with 40 mm thick RCC 1:2:4 type B-1 in cover slab with TMT bars 8mm dia @ 150 mm c/c both way with GI protection pipe complete including taking out old existing U/s earthing all as specified and directed. Note : Cost of earth lead and protection pipe upto 7.5m shall deemed to be included in quoted rate.

CONSTRUCTION OF STEPS FOR SEATING IN SMR DSTSC (REV WORK) Dismantling floor hearth or wall tiling including cement motor beadding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L for brickwork with fly ash bricks straight or curved on plan excedding 6m mean radius built in cm 1:6 complete all as specifed and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 with (using 12.5 mm graded stone aggregate) as in floor levelling course and in similar situation complete all as specified and directed.

M&L for 18mm thick granite black/red color (any type) work (table rubbed, one edge rounded & polished) in steps , riser laid over and including 20mm thick screed bed in cm 1:6 and jointed in cemet mortat 1:4 & pointed in white or coloured cement to match the shade of granite etc complete all as specifed and directed.

INSTALLATIONS OF NIGHT/LED SIGN BOARD AT MILIT (REV WORK) S&F installation complete aluminium profile LED letters 'MILIT' acrylic letters with logo, company - Samsung Corea LED light with 3 yrs warranty + Aluminium Compostie panel, font - Arial Bold Colour - white font (to be approved by the user) Size of LED letters height - 5 ft, width - 20" on glazed finish brown back ground including waterproof electrical concealed wiring installation with FRLS wires automatic timer setter (on-off) 5 No Stabilisers/5 No SMPs complete all as specified and directed. Note : Comprehensive warranty of 3 years from the date of actual installation shall be submitted by contractor.

M&L for MS fabrication sturcture including civil work length 25ft, 14 guage heavy MS structure 12"x12" Box pillers + 03 Nos RCC block- 18x18x18 with back support RCC blocks and making good the disturbed portion of floor/platform etc including necessary form work complete all as specified and directed.

Removal of the existing rusted/broken steel frame structure from top of the main building height 12ft width 30 ft including necessary form work complete all as specified and directed.

M/S P D TUPE

Bharekar Construction

Mehta and Co.