Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹40.0 LAccepted-AOC | L-1 | Accepted-AOC the lowest bidder | |
| 2 | L-2₹36.5 L+₹88,427 (2.49%)Rejected-AOC GATE NO 3 DIBRUGARH NEAR LANCO POWER PLANT ANPARA SONEBHADRA | ANPARA | SONEBHADRA | UTTAR PRADESH | L-2 | Rejected-AOC not the lowest bidder | |
| 3 | L-3₹36.8 L+₹1.3 L (3.57%)Rejected-AOC BLOCK D FIRST FLOOR COMMERCIAL COMPLEX KUNJ BIHARI AGRAWAL KORBA KORBA KORBA CHHATTISGARH 495677 | KORBA | CHHATTISGARH | 495677 | L-3 | Rejected-AOC not the lowest bidder |
Tender Value
₹39.2 L
EMD Value
₹78,500
Closing Date
12 Jun 2023, 4:00 pmClosed
SE OMC4, DTPS, Anpara, Sonebhadra
SE OMC4, DTPS, Anpara, Sonebhadra
Routine Breakdown maintenance of HT/LT power and control cables, Electrical hoist and all exhaust fan and ventilation system at various places of EMD-II, 2X500 MW, DTPS, Anpara
2023_RVUNL_801402_1
N-ANP/D/OMC4/EMD2/6000001485
Open Tender
Electrical Works
Lump-sum
730 days
DTPS, Anpara, Sonebhadra, U.P.
As per tender documents
3 documents required · 3 mandatory
₹1,180
Dy.CAO, CFA and BO, DTPS, Anpara
₹78,500
17 Jul 2023
13 May 2023
14 Jun 2023
13 May 2023
12 Jun 2023
13 May 2023
Amount
Part-A
Routine maintenace of HT/LT power cables & control cables
Floor cleaning of cable vaults/galleries
Daily upkeeping of all mechanical and Electrical part of Electric hoist
Operation of Electric Hoist
Routine/Breakdown maintenace of all exhaust fan and vetilation system at various places
Part-B
Salvaging of HT cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150 Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
Laying of HT cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150 Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
End Termination of HT cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
Straight through joint of HT cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
Repairing/Tapping of HT cable of cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
Opening of HT cable terminal box & disconnection of power cable (Rs. per Job)
Connection of HT Power cable and cleaning of Terminal Box (Rs. per Job)
Salvaging of LT cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
Laying of LT cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
End Termination of LT cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
Straight through joint of LT cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
Repairing/Tapping of LT cable of cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
Miscellaneous works related with maintenance of cable racks, cable tray, risers, reducers, bends, elbows etc.
Replacement of deteriorated M.S. Trays of different Sizes.
Fabrication and fixing of cable rack& other M.S. structure.
Erection of junction boxes of different sizes.
Erection of riser, reducer, Elbow etc.
Erection after modification of various type of TPN switch/starter maximum up to 400 Amp.
Removal, re -fixing of tray covers in Boiler area.
Removal and re-fixing of chequer plates or grid on Boiler floor for attending cable fault on beneath the racks
Providing new tray cover at different locations&clamping there of as per size
Provide cable markers as danger board at every 10 meter to Avoid damage to under ground cables by grouting 2 Ft. long angle pieces wherever required.(as per scope of work)
Digging of earth for locating and attending the faulty portion of cable and refilling in the same manner after attending the fault.(as per scope of work)
Writing of nomenclature in size of 1-1/2 inch as and when required anywhere on the panel board.(as per scope of work)
Painting of trays/plates or other M.S. structure with red oxide primer with material.(as per scope of work)
Painting of trays/plates or other M.S. structure with synthetic enamel of reputed brands. Asian paints/Berger/Nerolac with material. (as per scope of work)
Cutting & disposal of grass, wild plants, shrubs, etc. as per scope of work for approx. 60,000 Sq.mtr.
Clearing jungle, including uprooting of rank vegetation, grass, bush wood, trees and saplings of girth up to 30 Cm measured at a height of 1 M above ground level and removal of rubbish up to a distance of 50M out side the periphery of the area cleared.
Alignment and Surface preparation of mono rail of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Breakdown maintenance / servicing of traverse Motor Gearbox Assy.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Breakdown maintenance / servicing of Rotary Motor Gearbox Assy.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Servicing of Hooks, Rope Pulley, Break shoe of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Rectification / Replacement of wire rope of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Smoothening of swirling/ Twisted rope of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Attending fault after Lowering& Lifting the hoist of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Replacement / Repairing of rope rails/ DSL and its proper alignment work.
Laying of flexible cable
Shifting of LT motor from site to repair shop/ place of work/ site store or vice versa
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Attending electrical breakdown
Breakdown Maintenance of Ventilation system
Replacement of starter of ventilation fan of different capacity
Replacement of Bearings in motor of ventilation fan of different capacity
Assembling and commissioning of ventilation fan of different capacity
Dismantling/Assembling of motors of ventilation fan located at different places
M/S SHYAM ERECTORS
BRITISH INDIA TRADING COMPANY
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .