Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAccepted-AOC R O JARNAIL COTTAGE BCS NEW SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L1 | Accepted-AOC quoted rates and Negotiated Rates | |
| 2 | L2₹8.1 L+₹9,098 (1.13%)Rejected-Finance | L2 | Rejected-Finance hair bidders | |
| 3 | L3₹8.3 L+₹22,813 (2.84%)Rejected-Finance VILLAGE SHANAN P O SANJAULI DISTT SHIMLA | SHIMLA | SHIMLA | HIMACHAL PRADESH | L3 | Rejected-Finance hair bidders | |
| 4 | L4₹9.7 L+₹1.6 L (20.3%)Rejected-Finance H NO 26 HB COLONY SHIMLA DISTT SHIMLA 1 | SHIMLA | HIMACHAL PRADESH | 171001 | L4 | Rejected-Finance hair bidders | |
| 5 | Not Admitted-Fee/PreQual/Technical R O RAJPUT VILLA BELOW BHOGAL NIWAS SHIMLA HIMACHAL PRADESH | KANGRA | HIMACHAL PRADESH | 176028 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹8.0 L
EMD Value
₹16,010
Closing Date
26 Oct 2024, 11:00 amClosed
AGM WSD SJPNL
AGM WSD SJPNL US CLUB SHIMLA 171001
A R M O of LWSS Gumma Providing Fixing of Air valve of 100 mm dia Near Mashobra Market
2024_SJPNL_94380_1
3622 dated 16/10/2024
Open Tender
Civil Works
Item Rate
180 days
Shimla
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹16,010
10 Dec 2024
16 Oct 2024
26 Oct 2024
16 Oct 2024
26 Oct 2024
16 Oct 2024
16 Oct 2024 - 26 Oct 2024
Amount
Dismentaling black topped surface for laying pipes and realaying the same (earth work excavation to be measured and paid saperately ) including all leads and lifts complete in all respect as per the direction of Engineer- in- Charge.
Excavation in foundation, trenches,etc. in earth work in all kinds of soil such as pick work,jumper work,blasting work, hard blasting and chiselling etc. stacking the excavated soil not more than 3 mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts.
Demolition above ground level upto floor two level including disposal of unserviceable material within 20 metres lead and including cutting the necessary reinforcement and separating from RCC/R.B. WORK.
Providing and laying cement concrete work 1:2:4(1cement:2sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- .
Walls (any thickness) but not less than 0.10 m thickness) attached pillasters, buttresses,plinth and string courses etc. from top of foundation level upto floor two level.
Stone soiling in all respect as per direction of Engineer- in- Charge.
Providing Mild steel/Tor steel reinforced for RCC work including bending, binding and placing in position complete upto floor two level i/c all leads and lifts complete in all respect : Tor steel.
Providing and laying cement concrete 1:2:4 (1cement:2sand:4 graded stone agg. 20 mm nominal size)and curing complete excluding cost of form work i/c all leads and lifts and to the entire satisfaction of the Engineer-in-charge in :-a) Foundation and plinth.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting, strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 3 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work in complete in all respect i/c all leads and lifts and to the entire satisfaction of the Engineer-in-charge.
Vertical surfaces such as circular walls (any thickness), partitions and the like including attached pillasters,buttresses, plinth and string courses and the like.
Providing and fixing Mechanical joint Coller for DI pipe complete in all respect as per the direction of the Engineer-in-charge.
500 mm dia.
Providing and fixing double flanged cast steel Air Release valve Class -300 of Kirloskar/Leader of various dia and capable of with standing the normal Test pressure as per B.T.P.-77 Bar Hyd. S.T.P.-57 Bar Hyd. with upto date amendment complete in all respect as per the direction of the Engineer-in-charge.
100 mm dia cast steel Air Release valve Class ASA-300
AMRISH (BID ID -445656)
balwant Singh Panwar (BID ID -445651)
Munish Jain (BID ID -445216)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .