PROVN OF SEPARATE TOILET BLOCKS FOR JCOS/OR ADJACENT TO ADM BLOCK (P-121) OF 515 ARMY BASE WORKSHOP UNDER AND SPL REPAIR TO BLDG NO P-90 (1-2) TOTAL 2 X ACCNS (JCO MD ACCN) AT HR BK OF 515 ABW AND PROVN OF BOUNDARY WALL (LENGTH 100 RM) IN FRONT OF BL

Amount

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25design mix as in foundation, incl rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs under reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hopping for columns, hooking ends and binding with and incl mild steel wire not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S&F mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required incl cranking, bending, spirally for hopping for columns, hooking ends and binding with and incl mild steel wire not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for rough finished formwork to sides of flat concrete foundations, footings, based of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc ccomplete all as specified and directed.

M&L for formwork to edges of concrete flats, breaksin floors, openings in concrete wals, floors and roofs and sides of RCC/PCC bands in walls, horizontal of slopping, and similar work complete all as specified and directed.

M&L for precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F mild steel works conforming to Fe 290 Gde E-165 as in angle iron post and struts in fencing incl cutting tops to shape as directed drilling holes notching for wire etc. incl all necessary drilling, bolting of riveting etc. complete all as specified and directed.

M&L for preparation of new or previously untreated steel and steel based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails incl securing or tying at crossing with and provision of galvanised mild steel wire complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs, incl weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F Broken glass coping on top of walls complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm complete all as specified and directed.

Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

Dismantling existing water proofing treatment any type and thickness from top surface of roof slab and removing the materials from the site etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in floors/roof and pavings n.exc 15 cm thickness (below or above ground level) and removing debrits out side the MD land complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof/floor complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately as supply only under relevant item of this schedule)

Supply only integral water proofing compound complete all as specified and directed.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017 mineral finish , 3mm thick and weighing not less than 3.80 kg per Sqm reinforced polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminous aluminium paint @0.10 Ltr per Sqm complete all as specified and directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. incl brushing neat cement slurry with 3kg of cement per sqm complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F coloured glazed ceramic tile in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:4 mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and fair complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid for separately as supply only under relevant item of this schedule).

M&L for 5 mm thick rendering on concrete surfaces (ceiling) in cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment of old treated surfaces of walls including washing, rubbing etc. and applying two coats of exterior weather proof paint on walls, ceiling, chajja etc. over a coat ot primer as manufactures instructions with all necessary scafolding etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment and applying three coats of white wash on ceiling complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over one coat of primer including 2 mm thick of wall putty on plastered surface complete all as specified and directed.

M&L complete removal of existing treatment and applying two coat of distemper oil emulsion over one coat of primer on plastered surface complete all as specified and directed.

M&L for applying Plaster of paris putty 2 mm thick on plastered surfaces to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L preparation of old plastered surfaces of walls and applying two coats of whtie wash

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coats of synthetic enemel paint complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples.

M&L for 2nd class soft wood plain fillets, square, rectangular or trinagular in section, clean sawn, secured with nails or brads, cross sectional area n.exc 3 sqcm complete all as specified and directed.

Taking down, easing, adjusting and refixing in same opening as required, shutters of any description exc 2 sqm and n exc 4 sqm each complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 35 mm thick 2nd class hardwood rail and styled plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commerecial veneering on both faces. The size of rail and stiles as per IS : 1003 (Part-I), klin seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc., provided with stiles and rails as specified, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (b) complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm complete all as specified and directed.

S&F 25 mm thick flush shutters, solid coe construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixed in opening as per specification and drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side colour PVC shet to be fitted in the M.S frame selded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixed to frame, all as per specification & drawing.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 75 mm long but hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 100 mm long aluminium anodised barrel tower bolts and extruded section complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolts and extruded section complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 4.0 mm thick sheet glass ordinary quality and glazing with wooden beads in square n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 4.0 mm thick sheet glass ordinary quality and glazing with wooden beads in square n.exc 0.5 sqm in each pane (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty/wooden beads in square n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair 25 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe of brass ferrule and fixed.

Taking down rain water/waste/soil pipes ( any size or pattern ) upto 110mm dia including all fittings complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends with access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends with access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) reducers complete all as specified and directed. specified and directed.

S&F 110 mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F 15 mm bore GI tubes, medium grade, galvanised, with all fittings and fixture complete to walls and ceilings or laid in floors including taking down old unserviceable GI tubing complete all as specified and as directed.

S&F 20 mm bore GI tubes, medium grade, galvanised, with all fittings and fixture complete to walls and ceilings or laid in floors including taking down old unserviceable GI tubing complete all as specified and as directed.

S&F in repair wash down water closet orrissa pattern size 580x440mm white with integral foot rest and trap, including connection to drain and to flushing pipe, antisyphonage pipe etc. complete incl making good to floor complete all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified and as directed.

S&F in repair vitreous china white wash hand basin flat back size 550x400mm excluding taps, waste, chain and plug and porecelain stopper but incl brackets and cutting for pinning in ends of brackets complete all as specified and as directed.

S&F 32 mm bore waste fittings, brass, chromium plated for glazed ware basins with long screwed shanks and fly-nuts, flange end bedded red lead cement and other end fixed complete all as specified and as directed.

S&F PVC connection 15 mm dia with PTMT nuts of lenth 450 mm complete all as specified and as directed.

S&F in repair 15 mm bore angle cock valves, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F in repair 15 mm bore bib taps fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair stainless steel soap dish approximate size 160x160x90mm embedded in the wall complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges complete all as specified and as directed.

Dismantling boardings, any description, fixed in any position fixed with nails complete all as specified and as directed.

M&L 18 mm thick plywood, grade BWP, type BB, fixed with screws to timber frame work.

S&F decorative lamination type 1.5 mm thick type 1 surface finish colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.

S&F 30 mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F MS 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified and as directed.

S&F magnetic catch for drawer of suitable size complete all as specified and as directed.

S&F in repair kitchen sinks made of stainless steel 1mm thick, kitchen with plugs, washer, and waste including bedding with mortar on to dwarf wall or including fixing cantilever brackets and conncting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330mm x 160 mm complete all as specified and as directed.

S&F stainless steel plate rack of size 95 x 85cm complete all as specified and as directed.

M&L for 20 mm thick granite (of any type) work (table, rubbed and polished) in cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete any description and in any position not otherwise specially provided for complete all as specified and as directed.

M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and smooth without using extra cement.as in plinth protection incl joints filling complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

S&F 500Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including taking down old unserviceable one complete all as specified and as directed.

S&F in repair harison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Taking down steel window shutter n.exc 1 Sqm and applying oiling/greasing, minor repair ie change hook eye, handle and lock handle and refix the same in same opening complete all as directed by Engr-in-Charge .

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165 complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges steel peg stay, complete complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

S&F anodised aluminium frame for doors, windows vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating complete all as specified and as directed.

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium spap beading, screws etc, complete all as specified and as directed.

S&F 200 mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F 125 mm long but hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150 mm long brass handles, cast type, polished bright complete all as specified and as directed.

Spreading & well ramming in layers n. exc 25 cm thick including watering complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate), as in sub base of floors complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in sub base of floors complete all as specified and as directed.

S&F white glazed ceramic tile in vertical surface area exc 0.06 sqm but n.exc 0.12 sqm set over 10 mm thick rendering on fair faces of brick work or concrete surfaces as backing coat in cement mortar 1:4. and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

S&F mild steel TMT bars 5mm dia and over upto and incl 10 mm dia, cut to length, bent to shape required, incl cranking, bending spirally for hooping for in stirrups, spaces and binders and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl weathering slightly rounded or chemfered angles and throating complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade, galvanised, with all fittings and fixture complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20 mm bore GI tubes, medium grade, galvanised, with all fittings and fixture complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified and as directed.

S&F vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling etc complete all as specified and as directed.

S&F solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixed in opening as per specification and drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side colour PVC shet to be fitted in the M.S frame selded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixed to frame, all as per specification & drawing.

S&F health faucet with PVC tube 1 m long with screwed nut for inlet connection complete all as specified and as directed. Make:- Cera Cat Part No. F 8030103 or equivalent in Jaguar/Kohlar.

S&F vitreous chinaware urinal half stall type white with grating & union for discharge pipe complete all as specified and as directed.

S&F 15 mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F 15 mm bore fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe complete all as specified and as directed.

S&F brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (min wt 60 gms) complete all as specified and as directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F PVC (SWR) 110 mm branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Min wt 210 gms) complete all as specified and as directed.

S&F 500 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge n.exc 63mm deposited spread and leveled in layer n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

S&F 25 mm bore GI tubes, medium grade, galvanised, with all fittings and fixture laid in trenches complete all as specified and as directed.

M&L for cutting screwing exsiting GI pipe up to 50mm for inserting Tee pieces, bends, sockets etc fotaking out ofnew connection complete all as specified and as directed.

S&F 25mm bore gun metal gate valve in repairs with inner wheel head, screwed both ends in iron pipe and fixed complete all as specified and as directed.

S&F 25mm dia float valves complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M&L for salt glazed stone ware drain pipes, grade 'A', 150 mm bore (internal dia) laid in trenches on concrete bed, to required slope, jointed and tested complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains making good to pipe and rendering, ctting out existing benching for and forming branch channel (1/2 round 3/4 section) in cement concrete (1:2:4) type B-1, finished smooth and reforming benching as required for any dia of pipe complete all as specified and as directed.

M&L for concrete bed to 150 mm bore drain pipes incl packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type C2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in cover slabs (for manholes etc) complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in modular type steel sheet pressed terminal box (surface mounted ) with 2mm thick hylium sheet and brass screw with cup washers for fixing switches/sockets/regulators etc.one light/CB/fan point controlled by one switch complete all as specified and directed.

All as per item No. 158 here-in-before but for one 3 pin 5 Amps socket point on the independent board with other switches complete all as specified and directed.

All as per item No. 158 here-in-before but for one 3 pin 5 Amps socket point on the same board with other switches complete all as specified and directed.

All as per item No. 158 here-in-before but for one light point controlled by two two way switches complete all as specified and directed.

All as per item No. 158 here in before but with cable 4.0 sqmm including 4.0 sqmm cable as earth wire for socket outlet 15 Amps on independent board complete all as specified and directed.

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F switch piano flush type single pole two way 15 Amps complete all as specified and directed.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose complete all as specified and directed.

S&F switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type complete all as specified and directed.

S&F switch bell push flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F bell Ding Dong AC 230 Volts, single Pole complete all as specified and directed.

S&F fan regulator step type 120W complete all as specified and directed.

S&F ceiling rose surface type 3 terminals to be fixed on PVC block complete all as specified and directed.

S&F surface mounted Mini light LED batten 1 feet with extruded aluminium housing and robust construction 5Watt system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose all as specified and directed. Make:- Bajaj cat part No-BCLSB 05 WH or equivalent in Wipro/Philips.

S&F surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose complete all as specified and directed. Make:- Bajaj cat part No-BCLSB 10 WH or equivalent in Wipro/Philips.

S&F surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 24 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories complete all as specified and directed. Make:- Bajaj cat part No-BCLSB 20 WH or equivalent in Wipro/Philips.

S&F LED Bulkhead light fitting 10 Watt Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge lit LED luminarie comprising of high brightness LEDs including connetcion of fllexible copper wire 2 core from fitting ceiling rose/connection point complete all as specified and directed. Make:- Bajaj cat part No-BIBWP 10W LED or equivalent in Wipro/Philips.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi stranded copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows including taking down old unserviceable item complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Taking down old ceiling fan, cleaning of blades, replace of condensor, rubber bushes, wire etc and refixng it in the same place after copletion of work all as specified and directed .

S&F Metal body sound proof exhuast fan 300 mm size with single phase 230 Volt 900 RPM with louvers complete, making a hole in wall and making the distrubed surface of wall in good condition after finishing the work including dismatling old one and deposit to AGE E/M Store yard complete all as specified and directed. Make:- Bajaj Product code 70046 or equivalant in Havells/Usha /Crompton

S&F PVC Body sound proof exhuast fan 250 mm size with single phase 230 Volt 900 RPM with louvers complete, making a hole in wall and making the distrubed surface of wall in good condition after finishing the work including dismatling old one and deposit to AGE E/M Store yard complete all as specified and directed. Make:- Bajaj Product code 70049 or equivalant in Havells/Usha /Crompton

S&F PVC Body sound proof exhuast fan 250 mm size with single phase 230 Volt 900 RPM with louvers complete, making a hole in wall and making the distrubed surface of wall in good condition after finishing the work complete all as specified and directed. Make:- Bajaj Product code 70049 or equivalant in Havells/Usha /Crompton

S&F Sheet metal enclosure SPN for DB's when MCB's to be used with 200 amps bus bar double door 8 way complete all as specified and directed.

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

S&F MCB SPN 6 -40 Amps, 240 Volts complete all as specified and as directed.

S&F MCB SP 6 -40 Amps, 240 Volts complete all as specified and as directed.

S&F MCB DP 32Amps complete all as specified and directed.

S&F MCB SP 5 to 20Amps complete all as specified and directed.

Taking down unserviceable old meter box and supply, fabricate, test and commisioning wall mounting meter box of size 750mm x 750mm x 200mm depth concealed type, powder coated made of 2.0mm thick CRCA sheet, weather and vermin proof with double stud hinged door front open with internally locking arrangement and externally locking arrangement with aldrop bolt and hylum sheet suitable size should be fixed inside box including dismantling old meters and cutouts from old box and refixing energy meter in new meter box complete all as specified and directed. (Note: Fixing of MCCB & MCB various capacity in new meter box shall be measured and paid separately under relevent item of this schedule.)

M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 (with 20mm graded stone aggregate),chamber and 50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed .

RAMSON TRADERS