Karnataka

AOC

Works

Water supply/sewage lines

Desilting of Openwell Mesh GI pipelien in Bedsur K Tanda in Bedsur village in Kalagi Taluka and Providing PM and Pipleine to SC area at Bedsur village in Kalagi Taluka and Providing BW PM and Gescom and Pipleine in Mavinsur village in Kalagi Taluka under KKRDB

Rural Drinking Water and Sanitation Department

RWSSD Division Office Kalaburgi | Kalaburagi, Karnataka

Amount: ₹32.9 LCloses: 6 Jul 2026Closed

Timeline

Published24 Jun 2026
Closed6 Jul 2026
Awarded—

Bids

1 Bid6 Jul 2026

#	Company	Amount	Status
1	RAJU ₹27.6 Laccepted-aoc	₹27.6 L	accepted-aoc

Tender Value

₹32.9 L

EMD Value

₹65,804

Closing Date

6 Jul 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

Chandrakant

Mobile Number

Work Description

Desilting of Openwell Mesh GI pipelien in Bedsur K Tanda in Bedsur village in Kalagi Taluka and Providing PM and Pipleine to SC area at Bedsur village in Kalagi Taluka and Providing BW PM and Gescom and Pipleine in Mavinsur village in Kalagi Taluka under KKRDB

Tender Information

Tender ID

RWSSD/2026-27/WS/WORK_INDENT10292

Reference Number

RWSSD/2026-27/WS/WORK_INDENT10292

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Electronic Documents, First(One Cover)

Location

RWSSD Division Office Kalaburgi

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredThe Tenderer shall have valid class - III KPWD

RequiredIn any two financial year out of last 5 financial years 2021-22 to 2025-26 Turn over Certificate Certified by Chartered Accountant with UDIN Number compulsory

RequiredAs prime contractor at least one similar work such as of value not less than 50 percentage of amount put tender last 5 financial years 2021-22 to 2025-26not below rank of Executive Engineer

RequiredAssessed available tender capacity computed as per the formula in section 3.6

RequiredBorewell drilling shall be carried out only through a 7A registered rig owner, and an agreement between the contractor and rig owner is mandatory and A formal agreement shall be executed between the contractor and the 7A rig owner prior to commencement of Borewell drilling work

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Bidders are bond the guidelines / instructions issued time to from the government

The CC Road cutting work should be executed without Disturbing/ Damaging the Adjacent CC Road

If any date in the tender time table is government holidays, nest working date will be considered

Pipes which are used for the work are tested by CIPET and CIPET report is must for the payment

Corrigendums / modifications / correction if any will be published in the website only

The Department is not responsible for any delay in accessing KPPP portal

The Employer reserves the rights to reject any of all tenders without assigning any reason

Fee & Financial Details

Tender Fee Amount

₹830

EMD Fee Amount

₹65,804

Important Dates

Last Activity

6 Jul 2026

Published

24 Jun 2026

Download Ends

6 Jul 2026

BOQ Preview

•

Desilting of Openwell Mesh adn GI pipelien in Bedsur K Tanda in Bedsur village in Kalagi Taluka and Providing PM and Pipleine to SC area at Bedsur village in Kalagi Taluka and Providing BW PM and Gescom and Pipleine in Mavinsur village in Kalagi Taluka under KKRDB

•

Extra for every additional lift of 15 m or part thereof in excavation / banking excavated or stacked materials

•

Extra for every additional lift of 15 m or part thereof in excavation / banking excavated or stacked materials

•

Extra for every additional lift of 15 m or part thereof in excavation / banking excavated or stacked materials

•

Extra for every additional lift of 15 m or part thereof in excavation / banking excavated or stacked materials

•

Providing, Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including te...

•

Providing wrought mild steel (galvanized) 80 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any

•

Supply and delivery at site wrought middle steel (galvanized) 80mm GI bend confirming to IS 1239-II, 1991 with latest amendments if any

•

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 120m x 090m size made ...

•

Bedsur village Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical spec...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...

•

Providing and laying in position Cement Concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 15 ...

•

Providing and Filling in foundation with granite / trap broken metal 100mm And down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour with ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 350 m height The granite/trap/...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing 60x60cms MS inspection door with necessary MS frame made out of MS angle 50x50x6mm and MS shutters of 315mm or BG10 thick with hinges on top and locking arrangement, painting etc,...

•

Ladder inside the container Providing anodized aluminium ladder using 65mm x 32mm x 30mm ‘C’ section for ladder side channel x 25mm dia, flutal pipe for Rungs at 250mm c/c ladder fixed at an angle...

•

Providing and fixing MS ladder between landing 45 cms wide using angle iron of following size and 20 mm MS bars at 25cms centre to centre with necessary supports of same angle iron as directed includi...

•

Finishing walls with water proofing cement paint of required shade New work (Two coats applied @ 484 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mo...

•

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

•

Supply and delivery at site 50mm(2 ” ) dia heavy duty unplasticized PVC Column pipes with heavy duty collers,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proo...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm dia

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm dia

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog V...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well c...

•

Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc, comple...

•

Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

•

Supply and delivery at site Accessories for pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

•

Earthing Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit The pits should be filled up with equal proportion of salt...

•

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

90 MM ELECTRO FUSION COUPLER

•

90 MM ELECTRO FUSION ELBOW

•

Providing Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any

•

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any 80mm dia

•

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any 65mm dia

•

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any80mm dia

•

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any 65mm dia

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

•

Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc complete with all lead and lift with Murrum

•

Supply and delivery of HDPE Pipes grade PE 80/60 as per IS 4984/1995 with latest amendments if any, with IS mark PE 60 Outer Diamater 32mm Diameter

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments

•

Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm dia

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm dia

•

Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

•

Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark

•

Supply and delivery of HDPE Pipes grade PE 80/60 as per IS 4984/1995 with latest amendments if any, with IS mark PE 60 Outer Diamater 32mm Diameter

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm dia

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm dia

•

Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

•

Supply and delivery at site Accessories for pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-2 Fair.pdf

Tender Document • 0.64 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

RAJU

₹27.6 Laccepted-aoc