REPAIR/ CLEANING OF SEWAGE LINE SOAK WELL/ MANHOLES AND REPAIR TO DRAIN AND PAVER BLOCK IN VAYU VIHAR AND REPAIR/ MAINTENANCE OF SUMMER APPLIANCES AT AF STN ADAMPUR

Amount

Excavation in trenches n. exc 1.5 m wide for foundations etc. and not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for Plain Cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in coping,weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Plain Cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed crushed stone aggregate as in coping,weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Plain Cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate for foundation filling & mass concrete, complete all as specified and directed.

M&L for Plain Cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate for foundation filling & mass concrete, complete all as specified and directed.

M&L for Reinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in manhole covers and the like duly placed on manholes with cement mortar (1:4) complete all as specified and directed.

Supply only integral water proofing compound ISI Marked.

M&L for Brick work using bricks as specified in PS- clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified and directed.

Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Water Proofing Treatment to RCC sunken surfaces comprising of :

M&L for Rendering 15 mm thick (Average thickness) rendering on sunken surfaes including flashings, finished even and fair in cement mortar (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified and directed. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.

M&L for LDPE sheet 150 micron laid over applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m & adjoining vertical surfaces including applying bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces complete all as specified and directed.

NOTES: For Guarantee of Water Proofing Treatment refer PS clause 11.5 of CA.

M&L for 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified and directed.

M&L for 100 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggregate, finished even & smooth without using extra cement, as in sub floors, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 6- 8mm thick (square/ rectangular) area of each tile exc. 0.16 sq.m but n. exc. 0.20 sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry & pointed with polymer based grout of matching shade, laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for Non skid ceramic coloured tiles not less than 7mm thick (square/ rectangular) area of each tile exc. 0.06 Sq.m but n. exc. 0.11 Sq.m laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed.

Fixing only cement concrete paver block as in footpath, parks, lawns, drive ways or light traffic parking etc obtained from dismantled tiles or where floor is sunk, including 25mm thick compacted bed of coarse sand, compacting complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair mixed with water proofing coompound on walls in cement mortar (1:4), complete all as specified and directed. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.

M&L for Two coats of exterior acrylic emulson over and including a coat of water based exterior primer including prepration of new plasterd wall surfaces complete all as specified and directed.

Uprooting tree/plants upto 30 cm girth from wall or any part of building upto double storey buildings completly to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stone aggregate to match with existing surfaces and removal of rubbish outside MOD land complete all as specified and directed.

M&L for 500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, IN-REPAIRS, complete all as specified including the following acessories: - (i) Ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20mm bore IN-REPAIRS all as specified (iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified and directed. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP.

M&L for Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete all as specified and directed. MAKE:PRAYAG Cat No. P-6510 or equivalent make mentioned in Appndix 'B'.

M&L for Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete all as specified and directed. MAKE:PRAYAG Cat No. P-6508 or equivalent make mentioned in Appndix 'B'.

M&L for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), but and making connection with trap & flushing pipe, IN REPAIRS, complete all as specified and directed. MAKE: PRAYAG Cat No. 4055 or equivalent make mentioned in Appndix 'B'

M&L for PVC flushing cistern 10 litre capacity, dual flush syphonic action type, any shade, with side handle, ISI marked (IS: 7231) with flush pipe and all fixing arrangements, IN REPAIRS, complete all as specified and directed. MAKE: PRAYAG Cat No. 502 or equivalent make mentioned in Appndix 'B'.

M&L for PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPAIRS, complete all as specified and directed.

M&L for Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable for Cast iron soil waste discharge pipes 100 mm bore, with oval access door, ISI marked , IN REPAIRS, complete all as specified and directed.

M&L for Cast iron oval access door on exiting pipes fixed to wall of any description suitable for 75mm to 100mm external dia including washer and other necessary fixing arrangment, IN REPAIRS, complete all as specified and directed.

M&L for 100mm Cast iron 'P' or S trap to fit WC outlet etc IN REPAIRS, complete all as specified and directed.

M&L for 110 mm bore uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed under floors / fixed to wall as SWR pipes, IN REPAIRS, complete all as specified and directed.

M&L for 110 mm bore, uPVC/PVC bends any radius, complete all as specified. suitable for uPVC soil waste discharge pipes, IN REPAIRS, complete all as specified and directed.

M&L for Reinforced concrete pipe class NP-2, ISI marked, laid in trenches including jointing & testing complete with collars complete all as specified of following size:-

150mm bore

200mm bore

300mm bore

M&L for Cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipes of any description including packing under and haunching against the sides of pipe complete all as specified. of following size:-

150mm bore

200mm bore

300mm bore

Cutting into existing manholes for connecting new drains of 150 mm bore,making good to pipe and rendering cutting out existing bencing for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching etc complete all as specified.

Cutting into existing manholes for connecting new drains of 200 mm bore,making good to pipe and rendering cutting out existing bencing for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching etc complete all as specified.

Cutting into existing manholes for connecting new drains of 300 mm bore,making good to pipe and rendering cutting out existing bencing for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching etc complete all as specified.

Removing of blockage / cleaning of sewage lines 100 mm bore laid at any depth (either manually or mechanically) by removing all type of sand/ sludge/ silt and any other foreign material deposited in it including manholes and removing the same outside MoD land in closed tanker etc complete.

Removing of blockage / cleaning of sewage lines 150 mm bore laid at any depth (either manually or mechanically) by removing all type of sand/ sludge/ silt and any other foreign material deposited in it including manholes and removing the same outside MoD land in closed tanker etc complete all as specified and directed.

Removing of blockage / cleaning of sewage lines 200 mm bore laid at any depth (either manually or mechanically) by removing all type of sand/ sludge/ silt and any other foreign material deposited in it including manholes and removing the same outside MoD land in closed tanker etc complete all as specified and directed..

Removing of blockage / cleaning of sewage lines 300 mm bore laid at any depth (either manually or mechanically) by removing all type of sand/ sludge/ silt and any other foreign material deposited in it including manholes and removing the same outside MoD land in closed tanker etc complete all as specified and directed..

Removing of blockage / cleaning of sewage lines 600 mm bore laid at any depth (either manually or mechanically) by removing all type of sand/ sludge/ silt and any other foreign material deposited in it including manholes and removing the same outside MoD land in closed tanker etc complete all as specified and directed..

Removing / cleaning of blockage from traps of WC trap, bath rooms/ kitchen sink/ wash hand basin/ urinal point and gully traps of any description and in any position by removing sand/ sludge/ silt and other foreign material deposited in it (either manually or mechanically) upto first manhole and making the sewage system functionalt o the entire satisfaction of Engineer-in-Charge, complete all as specified and directed..

Dewatering semi solid sludge from sewage sump wells and drainage out/lifting the sludge with pumping sets collecting/filling including removing the same outside MoD land in closed tanker etc complete all as specified and directed.

Dewatering and cleaning of manholes, pits, sewage sumps with mechanical means i.e by sewer suction machine / honey sucker and drainge out the same disposal of sludge outside MoD land in closed tanker etc complete all as specified and directed.

Dewatering the over head water tank and then cleaning and removing all scales and dirt silt etc from water tank, removing lid and refixing the same in same position without disturbing pipe line system and float valve and making functional after cleaning and writing “cleaned on ..... .... (Date, month & year)“ format with white painting complete including removing of all previous writing all as specified of following capacity:-

Up to 500 Litre

Exc 500 but n exc 1000 Litre

Cleaning of static water tank by puming out all water with puming machine of capacity upto 50000 gallon and removal of all silt / rubbish,alkali, fungas small trees etc complete cleaning etc and after cleaning and writing “cleaned on ..... .... (Date, month & year)“ format with white painting complete including removing of all previous writing all as specified.

Maintenance of drain / Nallah (cross sectional area n exc 1.5 Sq.m) by cutting all bushes, shrubs, sarkandas and any type of vegetation and desilting all deposit of soil and other material to have a free flow of water and to get a uniform trapezoidal/ rectangular shape of drain and removing all spoil outside MOD area at authourised dumping site declared by local administration etc complete.

Removing existing cover slab and re-fixing the same after cleaning of drain/Nallah properly without damaging the cover slab complete all as specified and directed..

Taking down cement plaster of any description on brick walls, ceiling or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling, stone slab(s) including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (salt glazed stoneware, AC or reinforced concrete) set in cement mortar all as specified and directed.

Demolition and breaking up 200mm bore drain pipes (salt glazed stoneware, AC or reinforced concrete) set in cement mortar all as specified and directed.

Demolition and breaking up 300mm bore drain pipes (salt glazed stoneware, AC or reinforced concrete) set in cement mortar all as specified and directed.

REPAIR/ MAINTENANCE OF SUMMER APPLIANCES

M&L for taking down the defective ACs/Refrigerator and Water Cooler of the following capacity, taking out the defective unserviceable hermetically sealed compressor from the unit, replacing the compressor with new compressor of the same capacity, fixing to the unit inter connecting the refrigerating lines, flushing out the cooling coil & condenser, removel the coil & carbon thoroughly, cleaning with CTC, leak testing, presure testing with nitrogen gas, dehyderating, Vaccumissing, charging of Refrigerent gas, reinstalling the same in its original position connecting up all electrical connection and Testing & Commissioning all as specified as directed by Engineer - in - Charge. Note : (i) Rate quoted is deemed to be inclusive of cutting, welding, brazing,sealing the refrigerant tubing, replacement of strainer, CTC, Nitrogen gas, Refrigerant gas,required to and from Transportion and Handling. (ii) M/L for spares will be measured and paid separately. Make of AC unit shall be Carrier/Voltas/LG/Blue Star, Videocon ,Usha.

Window type AC 1.5Ton

Split AC 1.5Ton

Split AC 2 Ton.

Refrigerator 165 to 320 ltr

Water Cooler 40/80 & 60/120 ltr.

NOTE FOR SERIAL ITEM NO 59.01 TO 59.05 (i) Unserviceable sealed compressor may be given with more than one cut (ii) Unit rate include transportation to site of work & back as applicable (iii) Cost of refrigeration gas & oil deemed to be included in the unit rates quoted by the contractor. (iv) Make of new items to be replaced shall be approved by GE

S&F in repair of single shaft outdoor unit blower fan motor with blower fan suitable for and model of split/ vertical type AC & Water coolers of any capacity, single/duble speed, single phase, 230Volts, AC complete all as specified and as directed.

Split AC 1.5 Ton

Split AC 2 Ton

Water Cooler 40/80 & 60/120 ltr.

S&F, in repair blower fan motor with blower suitable for any model of Window type AC of any capacity, single/double speed, single phase, 230Volts, AC complete all as specified and as directed.

S&F, as in repair of indoor swing motor suitable for any make/model of split/window type AC,12V DC complete all as specified and as directed.

Split AC 1.5 Ton

Split AC 2 Ton

Window type AC 1.5 Ton

S&F, as in repair of Fan blade suitable for existing model outdoor unit of splt type AC & Water cooler of capacity complete all as specified and as directed.

Split AC 1.5 Ton

Split AC 2 Ton

Window type AC 1.5 Ton

Water Cooler 40/80 & 60/120 ltr.

S&F, as in repair of indoor unit consist of accessories such as copper cooling coil ,blower motor, swing motor & PCB etc for AC Capacity any make/model including connection of existing electrical cables and copper tubing complete all as specified and as directed.

Split AC 1.5 Ton

Split AC 2 Ton

S&F, as in repair of outdoor unit consist of accessories such as copper cooling coil, compressor and blower motor etc for AC Capacity any make/model including connection of existing electrical cables and copper tubing complete all as specified and as directed.

Split AC 1.5 Ton

Split AC 2 Ton

Re-winding of blower motor of window type AC 1.5 Ton capacity and make with supper enemelled copper winding wire of adequate size and guage, varnishing, drying, baking & insulation paper including REPLACEMENT GM bushes/ bearing, fixing and testing on load with testing etc complete.

Re-winding of blower motor of Split type AC any make supper enammelled copper winding wire of adequate size and guage,varnishing,drying, baking & insulation paper including REPLACEMENT GM bushes/bearing, fixing and testing on load etc complete of following capacity:-

Split AC 1.5 Ton

Split AC 2 Ton

S&F, Running capacitor of compatible for AC & Water coolers capacity IN REPLACEMENT complete all as specified and as directed as under :-

36 to 50 MFD

1.5 to 10 MFD

S&F as in repair of outdoor condenser cooling coil made up of copper tubes suitable for split/Ductable/Vertical ACs IN REPLACEMENT complete all as specified and as directed as under :-

Split AC 1.5 Ton

Split AC 2.0 Ton

S&F, as in repair of air conditioner mounting bracket heavy duty Gl steel/MS,Powder coating finish inclusive of nuts and bolts for mounting the bracket on existing surfaces and making the exisiting surfaces good complete all as specified and as directed.

Maintenance, servicing cleaning of at site, cleaning of equipment with blower for removing dust checking the wiring, running capacitor, staring relay, overload relay, thermostat switches condenser motor, blower/condensor fan rectification of fault, connecting and testing on load complete for following:-

Window type room air conditioner 1.5 / 2 Ton capacity

Split type room air conditioner 1.5 / 2 Ton capacity

M&L for complete repair to out door unit of AC Unit, including taking down all the components tinkering the rusted portion, renewel of complete rusted sheet metal parts, with the same thickness M.S. Sheet as per the existing size & shape including cutting, bending welding, drilling etc. Including renewel of all nut & bolts sheet metal screws, mounting legs, rubber bushes, and cleaning & prepare the surface thoroughly, applying two coat of synthetic enemel paint over a coat of red oxide primer fixing of all components, brazing the refrigeration piping and shifting to its original position and connecting up all electrical connections and testing all as specified as directed by Engineer-in- Charge. Note : (i) Rate quoted is deemed to be inclusive of cutting, welding, brazing,sealing the refrigerant tubing, replacement of strainer, CTC,Nitrogen gas, Refrigerant gas, required to and from Transportion and Handling. (ii) M/L for spares will be measured and paid separately. Make of AC unit shalll be, carrier/ Voltas/LG/Blue Star, Videocon, Usha.

Split AC 1.5 Ton

Split AC 2 Ton

M&L for leak testing of AC's, Refrigerator & Water Coolers by removing refrigerant from the unit, flushing the refrigeration system thoroughly with CTC, Nitrogen gas, leak test and locating the leaks, rectifying the leaks, by brazing the joints, replacing the damaged copper pipes, silver rod/copper. Pressure testing, dehydrating, vaccumissing, gas charging testing 7 commissioning the system the work include required strainer, N2 gas, refrigeration gas and transportions handling the unit all as specified and as directed by Engineer-in-Charge.

Window AC 1.5/2 Ton

Split AC 1.5/ 2 Ton

Refrigerator 180/280/310 Ltr

Water Cooler 40/80 & 60/120 ltr.

M&L for copper brazing for jointing two copper tube of any size in the work of air conditionning carrying out carefully with safety precautions including necessary testing complete all as specified and as directed.

Supply only Methyle-acetylene and propadience gas (flame gas) cylinder of weight 400 gm complete.

Spray painting of window type AC 1.5 Ton capacity including preparation of old surfaces and applying one coat of synthetic enamel paint (colour as per original shade ) including writing of SM No over the body with white/black paint complete.

S&F, Air filter, IN REPLACEMENT complete for following capacity :-

Window type AC 1.5 Ton

Split type AC 1.5/ 2 Ton

S&F, Sheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Metallic) complete with one single pole MCB for 240 volt 6 to 32 Amp rating rupturing capacity 10 kA complete fixed IN REPAIRS complete.

M&L for Copper Pipe including welding brazing of copper pipe, IN REPLACEMENT, complete. For following size:-

5/8"( with sleeves)

1/4"( with sleeves)

1/2"( with sleeves)

3/8"( with sleeves)

S&F, PCB Board compatible for split/window AC of any capacity IN REPLACEMENT for following capacity:-

Split type AC 1.5 Ton

Split type AC 2 Ton

Invertor type indoor unit Split type AC 1.5 Ton

Invertor type indoor unit Split type AC 2 Ton

Invertor type Outdoor unit Split type AC 1.5 Ton

Invertor type outdoor unit Split type AC 2 Ton

Window type AC 1.5/2 Ton

S&F, remote for any model of window type/split type Ac of any capacity IN REPLACEMENT complete.

S&F, condenser line filter for window/Split AC IN REPLACEMENT complete.

WATER COOLER :- M&L for Servicing of water cooler for any make including opening the machine on site removing the dust from body, cleaning condenser, cooling coil, fan/blower drum,water tank, oiling/greasing to fan motor, checking al the eleectrical connections necessary testing and commissioning complete all as specified and as directed.

Capacity 40/80 litre

Capacity 120/150 litre

NOTE FOR SERIAL ITEM NO 83.01 TO 83.02:- (i) Unit rate include transportation to site of work & back as applicable (ii) Cost of refrigeration gas & oil deemed to be included in the unit rates quoted by the contractor. (iii) Make of new items to be replaced shall be approved by GE

S&F, Starting relay for Water Cooler IN REPLACEMENT complete.

S&F, Hose pipe 20 mm dia synthetic PVC rubber corrugated of standard length for water cooler complete with two clamps (worm gear type) one on each side IN REPLACEMENT, complete.

S&F, 20 mm dia PVC pipe cotton braded for water cooler connection, IN REPLACEMENT complete

S&F, 20 mm dia MS clamp (worm gear type) for PVC pipe IN REPLACEMENT complete

S&F, Self closing taps of cast iron galvanised, chromium plated screwed for iron pipe suitable for water coolers IN REPLACEMENT complete

Maintenance & servicing of water cooler 40/80 ltrs & 100/150 Ltrs at site cleaning the equipment, checking wiring , running and starting capacitor, thermostatic switch condenser motor, blower fan, rectification of fault replacement of spare and charging of gas as on required basis, connecting & testing on load for performance complete. Note : Spare and gas shall be measured and paid separately.

M&L for Cutting, disconnecting & taking out the condensing unit of Water Cooler capacity and providing the new evaporator of existing size model in place including welding, brazing etc and testing on load complete.

REFRIGERATOR :- Maintenance, servicing & repair of refrigerator of following litres capacity any make model cleaning the various components and replacement i. e Chill tray, Shelves, Freezer door, Door Gasket, Door Lock, Blub Holder & bulb and Food tray complete for following size :-

165/175 litres capacity

230/310 ltrs capacity

S&F, as in repair of indoor unit consist of copper cooling coil for refrigerator capacity any make/model including connection of existing electrical cables and copper tubing complete all as specified and as directed.

Thermostatic switches for any capacity for Refrigerator IN REPLACEMENT, complete

Starting relay for Refrigerator IN REPLACEMENT, complete

Spare part of domestic refrigerator IN REPLACEMENT all as sample complete for following :-

Defrost timer

Bimetal relay

Defrost heater

Fan motor assy along with fan blade

over load protection for refrigerator

PTC relay

S&F, Condenser line filter for Refrigerator, IN REPLACEMENT, complete

Refrigeration gas (Mefron/Refron) in returnable cylinder for following :-

DESERT COOLER :-Servicing and painting of desert cooler installed at site, cleaning the equipment with air blower fan and wiping , dry and wet cleaning of body and louver, preparations surface with soft wire brush and painting the cooler with one coat of synthetic enamel paint checking the control wiring, fan & motor, tullu pump and replacement of the following plastic part of tullu pump and cooler body and oiling the pump & motor (a) Wiper (b) Plastic impeller of tullu pump with enclosure (c) Distributor complete.

S&F, Blower motor 230 Volts, AC 50 Hz single phase complete with blower fan for Desert Cooler of existing make and size, IN REPLACEMENT complete.

M&L for PVC insulated & sheathed stranded FRLS copper conductor 4 core cable 1100 Volts of size 2.5 sq. mm ( nominal area), IN REPLACEMENT complete all as specified.

S&F, Pump motor 1/26 HP (Tullu pump) 230 volts, single phase, 1440 RPM for desert cooler IN REPLACEMENT, complete.

S&F, Wood wool pad set suitable for desert cooler heavy duty IN REPLACEMENT, complete.

S&F, GI Socket 15 mm dia fixed IN REPAIR, complete.

Top Plug 3 pin 220 Volt 5 Amp, IN REPLACEMENT complete.

VOLTAGE STABLIZER :- Automatic voltage stabilizer single phase 50 Hz complete with time delay relay and auto cut off in the event of low/high voltage and all as per the following parameters fixed IN REPLACEMENT:- (i) Incoming voltage 140 V to 200 V (ii) Stabilized voltage 230 +- 5% complete for following size:-

3 KVA capacity

5 KVA capacity

Re-winding of main transformer of voltage stabilizer with super enamelled copper winding wire of suitable gauge including making connection by soldering and testing etc complete of following size:-

3 KVA capacity

5 KVA capacity

S&F, Relay for voltage stabilizer 240 volts all as per sample and required at site IN REPLACEMENT, complete.

S&F, Volt meter 0-300 volts, fixed IN REPAIR, complete.

S&F, Amps meter 0-30 Amp, fixed IN REPAIR, complete.

S&F, Timer circuit for voltage stabilizer IN REPLACEMENT all as per sample and required at site complete.

S&F, Connector porcelain type for voltage stabilizer IN REPLACEMENT, complete.

S&F, Drain hose pipe of length 05 metre for Air Conditioners/Water Coolers, IN REPLACEMENT complete.

S&F, Metal clad socket with two Pin and earth & plug top with one MCB SP 240 volt 20 Amp, IN REPLACEMENT complete.

Providing services for attending all types of day to day complaints in respect of all make, work & type of cooling appliances i.e., Air Conditioners (window type, split type, cassette type and ductable type) , water coolers , desert coolers and voltage stabilizers installed at various locations by providing skilled qualified refrigerator mechanic cum electrician with helper per day alongwith required tools/equipments/machine/test kits/gas filling gauge, gas charging adopter, gas charging valve, drill machine with drill bit, allen key set, ladders, ropes ,clamp meter, brazing rod, butane gas cylinder, tape roll, vacuum pump, suction discharge valve, washing pump, spanner set, copper tube cutter, flaring tool, & other instruments which are required for maintenance, repair and to make the equipment functional The complaints record to be maintained on the complaint register & complaint slips all as directed.

NOTE:- Not withstanding with the provision of "Compensation for Delay' envisaged under condition 50 of IAFW-2249, General Conditions of Contracts, additional compensation @ Rs. 500/- day will be charged from contractor in case he fails to make the functional to the entire satisfaction of Engineer-in-Charge within 48 hour of receiving of complaint from the MES regarding non working above items.

Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.

J.K & Company (BID ID -3336504)

Northern cable fault locatoers (BID ID -3337576)