Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.6 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹49.1 L+₹47,664.40 (0.98%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹49.3 L+₹66,887 (1.38%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹51.5 L+₹2.9 L (5.87%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹52.2 L+₹3.6 L (7.44%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
14 Oct 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS PIN -913859, C/O 99 APO
PROVN OF CERTAIN REVENUE AND MINOR WORKS AT BAISAKHI AREA OF AGE B/R II AND AGE E/M UNDER GE 859 EWS
2022_MES_546087_2
8356/E8
Open Tender
Civil Works
Item Rate
270 days
BAISAKHI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹95,000
Yes
13 Dec 2022
30 Sept 2022
15 Oct 2022
30 Sept 2022
14 Oct 2022
7 Oct 2022
60 days
Amount
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and directed.
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 on concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
Preparing newly plastered surfaces of walls and applying three coats of whitewash complete all as specified and directed.
S&F solid PVC Door Frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, and fixed in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 100mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S&F 75mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.
S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed complete all as specified and directed.
Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Material and labour for second class clean sawn hard wood in scantlings fixed with nails complete all as specified and directed.
M&L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L Glazed coloured ceramic tiles (300x 200) x 6 to 7 mm thick as on vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C-2 ( using 40mm graded crushed stone aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Material and labour for preparation of new wooden wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.
S&F 3 layer 16 mm dia PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. Make : DUTRON/ FINOLEX/ TIRUPATHI/ SFMC/KPT
S&F 3 layer 25 mm dia PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. Make : DUTRON/ FINOLEX/ TIRUPATHI/ SFMC/KPT
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including pipe chain and plug, CI brackets complete all as specified and directed.
S&F fancy type, cast copper alloy, with capstan heads, chromium plated pillar tap for WHB screwed down for iron pipes of 15mm bore complete all as specified and directed.
S&F 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.
Supply and fix vitreous china squatting pan ' Orissa pattern ' size 680 x 470 mm white with 'P' or 'S' trap , front or back inlet with integral foot rests excluding flushing cistern and flush pipe and making good to floor complete all as specified and directed.
S&F 15mm bore stop valves, fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions & fixed
S & F CP, fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.
S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers
S & F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete.
S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.
Material and labour for plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.
Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc complete all as specified and directed.
M&L for providing cement concrete type B1 1:2:4 (using 20 mm graded aggregate) as in re-inforced cement concrete foundation, footings, foundation beams, plinth beams, piles and mass concrete complete all as specified and directed.
Supply and fix Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
All as per item no 41 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat concrete surface complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions.
S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) ISI Marked hoisted and fixed in position complete all as specified and directed.
S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make : Jindal/Leader/Scico)
S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges, coping etc including necessary formwork complete all as specified and directed.
M&L for reinforced precast cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in landing, cover slab , chajjas and similar articles with plain faces including necessary formwork, set in CM 1:6 complete all as specified and directed. Note - Reinforcement will be measured & paid seperately
Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 110 mm on after they are laid and tested complete all as specified and directed.
S&F PVC (SWR) bends any radius, bend 110mm dia with access door.
Material and labour PCC 1:3:6 type C2, (using 40mm graded crushed stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.
Use and waste of form work to sides of concrete sides of columns, pillers, piers, post and struts, slab supported on walls etc for fair finished surface complete all as specified and directed.
Surface dressing not exc 15 cm deep and getting out in hard /dense soil complete all as specified and directed.
M&L for 75mm thick PCC type D-2 (1:4:8) using 40 mm graded aggregates as in sub-base complete all as specified and directed.
M&L for 20 mm thick screed bed in CM 1:6 for laying floor tiles finished rough complete all as specified and directed.
M&L for chequered cement concrete pre-printed colour tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportion and no pigment complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide add for fair finished surface complete all as specified and directed.
M&L for rendering 10 mm thick in CM 1:4 on concrete surfaces, finished rough complete all as specified and directed.
M&L for rendering 10 mm thick in CM 1:4 on concrete surfaces, finished even and smooth w/o using extra cement complete all as specified and directed.
Material and labour applying for two coat of cement based paint over a coat of alkali resistant primer on new plastered surfaces including preparation of new wall surface complete all as specified and directed.
S&F 6mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.
S&F 4mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.
M&L for preparation of wood or wood base materials of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and directed.
M&L for cover fillet of standard hard board, 40mm wide, 4.5mm thick and fixing with screws.
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thick (below or above GL) including removing rubbish off the premises complete all as specified and directed.
M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc all as specified.
M&L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ disintegrated rocks, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc. complete usingERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed.
M&L for plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections conforming to Fe-410- W(Gde- E-250) quality- B
Supply and fix for steel tubular Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.conforming to IS-1161-1998 grade St-240. A complete all as specified and directed.
Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.
Supply and fixing plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80 mm thickness (minimum 275gm/sqm galvanising) complete all as specified and directed.
M&L for applying two coats of anti corrosive roof paint over one coat of red oxide primer including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description complete all as specified and directed.
M&L for MS work as in wind ties for roof covering including securing bolts etc incl all necy drilling, bolting, or riveting etc and similar work conforming to Fe -290 Gde 165.
S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue , pinned at joints complete all as specified and directed.
Supply and fix 2nd class hard wood plain framed panelled shutters 30 mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer complete all as specified and directed.
Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars any numbers ,prepared to receive glass, gauge etc. with , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified SSR Part-I, section 8, clause 8.20(b) complete all as specified and directed.
S & F aluminium alloy, anodised, sliding door bolts 250 mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
M&L for point wiring with PVC insulated unsheathed stranded copper conductor, FRLS grade of size 1.5sqmm in and including PVC casing capping of required size surface type with all accessories including PVC for housing /mounting brackets, switches, sockets etc including 1.5sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green in colour as earth continuity for one light/ fan point controlled by one switch all as specified and directed.
All as per item No 82 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed.
All as per item No 82 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 2.5 sqmm 1100 volts FRLS grade and earth continuity wire 2.5 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 15 Amp 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin, 5 A, flush type.
S&F socket outlet 2 in 1, 3 pin, 15 A, flush type.
S&F LED bulkhead fitting 10 watt (Endura Rugby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. Cat No : LHEOAOP7UZ6W010 of make Havells or equivalent model of make Bajaj/Phillips/C&G/Eveready
S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed.
Supply and fix lamp holder, insulated body, with back plate for angular batten fittings complete all as specified and directed.
S&F 1x10 watt LED lamp, CDL, B-22 cap, (Pin type),230 W, PF not less than 0.85 (min). of Make Havells or equivalent model of Make Bajaj / Phillips/ Havells/ Eveready/ C&G
S&F LED light fitting 1x22 Watt, 220 V, AC decorative ultra slim polycarbonate LED lighting fixtures with high lumen output environmental friendly, energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular multistranded 6 sqmm complete all as specified and directed.
S&F SPN type renewable switch fuse unit of 230 V, 50 Hz single phase double pole of capacity 32 Amp incl MS box with bakelite fuse & fuse carrier fittings, operating insulated handle, top cover necy locking arrangements etc as per IS/ IEC 60947 1 & 3 incl necy wall mounting fitting duly grouted/ fixed in solid block wall or on wooden board . Make : IndoAsian/ L&T/ Havells
S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables fixed on suitable size of PVC board incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make: Havells/L&T/ABB/Schneider/Legrand
S&F MCB DB CRCA sheet powder coated SPN 4 way double door with 200 Amp rated bus bar factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables fixed on suitable size of PVC board incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make: Havells/L&T/ABB/Schneider/Legrand
S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F exhaust fans made of sturdy engineering plastic with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM, copper winding of sweep 300mm including necessary elctrical connection complete all as specified and directed.
Supply and fix sub main wiring with two single runs of single core 2.50 Sqmm PVC insulated and unsheathed cable with multi stranded copper conductor FRLS grade on surface or recessed or drawn in PVC casing capping along with 2.50 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed. (Note: One run of PVC casing capping ,one run of 2.50 sqmm earth wire and 2 Run of 2.50 sqmm cable shall be measured as one run.)
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 25x3 mm dia GI strip by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 40 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion.
passang construction
M/s Roltso Enterprises
M/S DK TRADERS
M/S N D ENTERPRISE
M/S RARAI ENTERPRISES
M/S R N ENTERPRISES
Sikha Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .