SPL REPAIR TO BLDG NO E-142 WITH OTM ACCN, 509 ASC BN AND ADDN/ATLN OF TOILET BLOCK AT BLDG NO 182 OF 32 INF BDE CAMP UNDER AGE B/R-IV AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5mtr depth and getting out in any type soil complete all as specified and directed.

Returning filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed.

Removing excavated soil not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L for broken bricks Hardcore of guage not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40 mm gradded) as in foundation filling and mass concrete complete all as specified and directed.

Treating the top surface of filled earth @ 5 litres of emulsion / Sqm of surface complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on brick surfaces or surface other than fair face of brick work or on one side of lathing in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Per Point

M&L TMT bars 10mm dia and over cut to length bend to shape reqd incl cranking, bending and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed.

All as item No 20.00 here-in-before but 6 to 8 mm dia

M&L for RCC (nominal mix) 1:2:4 type B-1 (using 20mm grade aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. Complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footings, bases of column, rafts, plinth beams and similar work vertical or to batter rough finished surface flat of concrete, With water tight complete all as specified and directed.

Use and waste of formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Circular on plan complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150 mm long of extruded section complete all as specified and directed.

S&F Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire stappler complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying wall putty and two coat of oil bound distemper (OBD) over one coat of primer complete all as specified and directed.

M&L Moorum/ red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

Construction of Soakage well, excavation in ordinary soil, foundation PCC 1:3:6 wells of honey combed and solid in M-25 concrete, including intercepting chamber screen chamber Brick work CM 1:4, RCC cover slab in M-25/RR masonery/ Filling with brick bats, complete of size 1.80 m dia x 3.0 m deep, complete all as shown in drg No - TD 309 Sheet No 1/4 to 4/4 and as directed by Engr-in-Charge.

M&L Cement concrete 1:3:6 type C-2 40mm aggregate as in foundation manholes complete all as specified and directed.

S&F 15mm bore fancy type CP Bib tap (long body) cast copper alloy with capstan head screw down for iron pipe or for brass furrel complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Demolition of PCC in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate) as in sub base floor etc complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM(1:6) complete all as specified and directed.

All as item No 103.00 here-in-before but herein over and including 10mm thick rendering in CM 1:4, as in skirting/dado complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded aggregate) as in bed block, copings, kneelers, apex stones, bed plates, water troughs and the like including cutting into bricks of stone wall as reqd for inserting hold fasts complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection, path including finished surfaces even and smooth without using extra cement complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

M&L Salt-glazed stoneware drain pipes laid in trenches & jointed as specfified of 150mm dia complete all as specified and directed.

Supply and fix false ceiling with 4mm thick E board white prelaminated, set embossed reinforced designer ceiling board of oceanic texture fixed over and including GI grid frame work of size not more than 600x600 mm having 25mm wide t-section runner made of 0.33mm GI sheet and angle made 0.45mm thick GI sheet suspended with and including 4mm dia GI wire and leveling clips complete all as specified and directed. Note: All exposed surface of grid shall be powdered coated white.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and specified.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F MS flat iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Supply & fix in repairs second class hardwood (SAL) as in plain solid straight chowkats or frames, wrought, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in perlins, rafters etc complete all as specified and directed.

M&L for complete removal of existing treatment and finishing of wall surface by using wall care putty and applying two coats of oil bound distemper (OBD) over a coat of primer in any colour complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surface of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel & iron surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Note :- Sand cushioning shall be measured and paid separetely.

M&L Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers not exceeding 25 mm thick complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc of suitable size as decided by Engineer-in-Charge. Note (i) For the purpose of measurement & payment double shutter with frame shall be co

nsidered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately complete all as specified and directed.

M&L for PCC 1:3:6 type C2 concrete bed to drain pipes including packing under, and completely surrounding pipes after they are laid and tested; in for 150mm dia pipe of SGSW complete all as specified and directed.

S&F fancy type CP Brass wall mixer for mixing hot & cold water with telephonic Shower screwed down for iron pipe complete all as specified and directed.

S&F in 25 mm bore drapery curtain rods powder coated finished as directed with fancy type incl fixing brackets, stops, rollers etc complete all as specified and directed.

Dismantling of Asbestos cement / Fiber (corrugated, semicorrugated, etc.) sheet any description as in roof covering incl ridge and removing from site complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frames/ chowkats; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe-410 or Fe-310 complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site complete all as specified and directed.

Material & labour for point wiring with FRLS PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in and including PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for one Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed.

Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed.

Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt. Complete all as specified and directed.

Supply and fix decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed.

Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified and directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated complete all as specified and directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed.

Supply and fixing exhaust fan steel body AC single phase 230 V of size 380mm sweep with blade , frame and lauvers complete all as specified and directed.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts complete all as specified and directed.

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including making connections complete with bracket fitting made out of GI pipe medium grade including clampsand nuts and bolts complete all as specified and directed.

Supply and fixing of decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate LED tube-01 No, with batten and all accessories complete all as specified and directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc complete all as specified and directed.

Supply and fixing Isolator 4 pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed .

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8way, with 200 Amps rated complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply & fixing MCB SPN, AC, 240 volts of 32 to 63 Amps, C curve, 10 kA, complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion com

plete all as specified and directed.