CONSTRUCTON OF 8 Nos. OFFICE MODULE IN PERMANENT CAMPUS OF GURUGRAM UNIVERSITY AT SEC-87,GRUGRAM

Amount

Providing and fixing Glass fiber Reinforced Concrete (GRC) Column 20-30 mm thick in approved size, pattern, Design and color manufactured by "DALAL TILES" or Equivalent. The Column should be made with '53 grade' white Portland cement manufactured by 'Birla White/JK' or equivalent, Alkali Resistant Glass Fiber manufactured by 'Owens corning' or equivalent, Quartz, fine silica sand, Supper plasticizers manufactured by 'BASF/PERMA' or equivalent, U.V. resistant Synthetic inorganic pigments should be used for pigmentation manufactured by 'Bayferrox' or equivalent, the material casting should take place in Synthetic Rubber/FRP Mould manufactured by Dalal Tiles or equivalent. The fixing of column should be dry fixing i.e. to be done with Stainless Steel (SS- 304) or GL'L' shaped clamps, dash fasteners and pins. Nothing shall be paid extra except steel frame work. Make: Dalal Tiles, Shenisha, Birla

Providing and fixing in position UPVC (S.W.R) pipe Grade-B for soil waste vent of anti syphonage pipe of approved make including suitable jointing to ensure leak proof service as per instructions for laying jointing laid by the manufacturer and including cutting and wastage etc. and cutting holes in walls, roofs and floors etc. and making to its original conditions but excluding th cost of C.C 1:2:4 around pipe lines complete in all respects as per satisfaction of engineer-in-charge. b)110mm outer dia (for sewerage)

c) 90 mm outer dia (for sewerage)

Providing & fixing U.P.V.C (S.W.R) 110mm X 90mm size nahi trap with PVC jali approved make including suitable jointing to ensure leak prof service and cement concrete 1:2:4 with sotne aggregate 20mm nominal size under & around the trap where required upto floor level complete in all respect including cutting and making good the wall and floor etc. as per satisfaction of enginer-in- charge. a) with 90mm o/d inlet.

Provinding and fixing in position rigid U.P.V.C (SWR) specials of approved make including sutiable jointing, to ensure leak proof service and cutting & wastage etc. and cutting holes In walls, roofs or floors etc. and making good to its originali) PVC Band

ii) Cowl

(C) for 90 mm dia pipe Tee 90 x 90 x 90

Providing, Fixing, testing & commissioning of health faucet with regulator with flexible pipe 1.5 m long, wall hooked complete as required. (Make Hindware/laquar/Cera)

Supply and fixing of surface mounting type Led light fixture, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED (Led luminiare 2' X 2', 36W , 4-6.5k)driver, PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer. (NS) Make-Havells/Wipro/Bajaj

Supplying and fixing surface mounting LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory. i/c connection wire, testing etc. to complete the job. (NS)Make-Havells/Wipro/Bajaj/vak(15 W , 180/200mm)

Supplying fixing and testing of LED Batten type Tube fitting with epoxy white powder coated CRCA sheet steel complete fixing wall/ceiling on PVC clamp/round plate with necessary materials complete as required. Make- Havells/Wipro/Bajaj/vak(LED 1 X 20 watt)

Supplying, erection and testing of approved make electric 1200 mm Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments. Make-Havells/Orient/Bajaj/vak

Supplying, erection and testing of approved make Wall Mounting fan complete with Wall Bracket ,canopy, blades, speed Regulator etc .A.C 230-250 volts with connections and including raw bolt/Anchor hole fastener etc. complete finished of approved as required. Havells/Orient/Bajaj a) 400 mm sweep

b) 200 mm dia fresh air fan

Frequency Meter

LED lamp indicator

Providing and fixing 350 x 350 x 50mm deep 1.6mm thick GI sheet junction box including providing 2mm thick stainless steel cover as per specification.

Providing and fixing 150 x 150 x 50mm deep 1.6mm thick GI sheet junction box including providing 2mm thick stainless steel cover as per specification.

Bidder Name

Amount

RMH INFRASTRUCTURE(GSTN-06AHDPS0130M1ZG)

SYZYGY Builders and Developers Pvt. Ltd.(GSTN-NA)

N.B.Y. Construction Pvt Ltd.(GSTN-NA)

RMH INFRASTRUCTURE

N.B.Y. Construction Pvt Ltd.

RMH INFRASTRUCTURE

N.B.Y. Construction Pvt Ltd.