Construction of Public Toilet in the limits of Sankeshwar TMC

Construction of Public Toilet in the limits of Sankeshwar TMC

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge

Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For RCC Beams, Lintels & Troughs of Aqueducts

Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For Roof Slab of builing

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

Providing and placing on terrace, polyethylene water storage tanks as per IS12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and ove...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap

Supply and delivery at site special moulded variety 140 mm dia PVC Elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

Providing fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For Foundation upto Plinth All other types

Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For RCC Columns / Shaft (Slip Centering)

Supplying and fixing of PVC casing and capping on the wall or

ceiling using necessary materials like bends, junction box,

elbows, screws at an interval of 300 mm . etc. as required

Supplying and flush mounting teak wooden box without front

plank, made of not less than 12 mm thick wood, after due

groove cutting, finishing with necessary cement plastering

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)

& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to I...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)

& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to I...

Wiring for lighting/power circuit using one of FRLS PVC

insulated 1100V grade, multistrand copper wire with low

conductor resistance single core in open or concealed system of

wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC

insulated 1100V grade, multistrand copper wire with low

conductor resistance single core in open or concealed system of

wiring with specified IS...

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The box

should be firmly flush mounted after due groove cutting in

Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The box

should be firmly flush mounted after due groove cutting in

Brick/Stone/C.C wall 8...

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., complete on

the existing m...

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., complete on

the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket.

Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input220-240V 50/60Hz Power factor 0.9 alo...

Supplying & fixing of Porcelain fuse channel with cut out on

existing wooden/panel using necessary nuts, bolts and

Supplying and fixing regular MCB distribution boards on

wall/ood board / flush mounting using required clA, bolts,

nuts etc., with provision for fixing suitable type capacity

MCB's single phase/3 phas...

Supplying and fixing regular MCB distribution boards on

wall/ood board / flush mounting using required clA, bolts,

nuts etc., with provision for fixing suitable type capacity

MCB's single phase/3 phas...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supply and fixing polished wood board made of not less

than 15mm thick plank on both sides of not more than 2

pieces and fixing the same to the wall using tapered inverted

wooden plugs screws.

Supply and fixing polished wood board made of not less

than 15mm thick plank on both sides of not more than 2

pieces and fixing the same to the wall using tapered inverted

wooden plugs screws.

Fixing a ceiling /wall mounting fan of all capacities and all

types, with necessary clA and 'S' hook made out of 15mm dia

MS rod, with 5 A. ceiling rose of approved quality with

necessary length of 23...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...