REPAIR TO DRAIN, PATH AND FENCING AT LEBONG UNDER AGE (I) DARJEELING

Amount

Excavation in post holes (or similar holes) each n.exc 0.5cum in soft/loose soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing of surplus soil to a distance n.exc 50 meters and making good surface, complete all as per specified and as directed by Engineer-in-charge.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, brick work, masonry, etc., including taking out embedded portion and making good distributed ground, complete all as specified and as directed by Engineer-in-charge.

Dismantling fencing wire mesh any type complete all as per specified and as directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundations, fillings and mass concrete complete all as per specified and as directed by Engineer-in-charge.

M&L for fencing post (ISA 50X50X6mm) including embeding in concrete and screwing etc. wind ties, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all as specified and as directed by Engineer-in-charge.

Supply only chain link MS galvanised fencing including wire mess size 4mm dia and nominal pitch of wire 100X100mm complete all as per specified and as directed by Engineer-in-charge.

Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails staining bolts etc incl provn of binding wires complete all as per specified and as directed by Engineer-in-charge.

S&F 10mm dia MS rounds bars provided in between fencing post to support chain link fencing incl necessary cutting, bending and hooking etc complete all as per specified and as directed by Engineer-in-charge.

S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed by Engineer-in-charge.

S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 50mm long (dia of neck 5 to 10mm) complete all as per specified and as directed by Engineer-in-charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as per specified and as directed by Engineer-in-charge.

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge.

Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in CM (1:6), complete all as specified and as directed by Engineer-in-charge.

M&L rendering 15 mm thick on fair faces of brickwork in cement mortar 1:4 on other than fair faces of brick work using WPC @ 3% by weight of cement (WPC to be measured and paid separately) finishing even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge.

Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) of any description and in any position and removing debris from the site, complete all as specified and as directed by Engineer-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specificied provided for, complete all as per specified and as directed by Engineer-in-charge.

M&L for precast cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars 10 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.

M&L cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in surface channels and drains, complete all as specified and as directed by Engineer-in-charge.

M&L for Formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surface of concrete flat complete all as per specified and as directed by Engineer-in-charge.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and as directed by Engineer-in-charge.

M&L 75mm thick PCC 1:3:6 type C2 (40mm graded agg.) as in road side pavings finishing even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.

M&L for 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes, complete all as specified and as directed by Engineer-in-charge.

M&L for factory made precast Coloured chequrered cement concrete coloured tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floor as in floor, paving and steps etc with grey cement and pigments complete all as specified and as directed by Engineer-in-charge.

HIRA SINGH (BID ID -3341252)

TSHERING WANGYAL BHUTIA (BID ID -3345420)

RAI CONSTRUCTION (BID ID -3342463)

BHASKAR PRADHAN (BID ID -3341537)

YADAV CHETTRI (BID ID -3341468)

THUKKEPA & PANGDOK (BID ID -3340656)

Darjeeling Enterprises (BID ID -3342854)

SANJAY KAUSHIK (BID ID -3342790)

JALAPAHAR HARDWARE (BID ID -3343561)