ADDN / ALTN TO DILAPIDATED RCC POST FENCING WITH PVC CHAIN LINK FENCING OF SEAWARD SIDE AREA AT SRINAGAR COLONY, MINNIEBAY AND CONSTRUCTION OF MT OFFICE AND MAIN GATE OFFICE AT BLDG NO P-238 OF STATIC WKSP EME UNDER GE MINNIEBAY, SVP

Amount

Dismantling posts or struts(wood, steel or R.C.C.) any section, including taking out embedded portion , embedded in concrete, brickwork or masory etc and making good disturbed ground all as directed.

Dismantling of Mild Steel Work of any description not otherwise provided for complete all as specified and as directed.

Dismantling fencing wire mesh any type.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil.

Excavation in trenches, n. exe 1.5 m wide and n.exc 1.5 in depth, for foundation, etc or to shafts, wells, cesepits, manholes, piers holes, ec, n.exc 10 sq.m on planand getting out in hard / dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soils complete all as specified and as directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5m complete all as specified and as directed

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate all as specified.

S&F MS framed work such as fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified.

S&F Framed work such as grills, gratings gates , etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts complete all as specified. (Note : MS rod,and MS bolts will be measured and paid seperately as supplied only)

Supply only mild steel screw bolts n exc 12 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing all as specified.

Supply only 10 mm dia Round bars for support to chain link fencing confirming to Fe-290 (Gde E-165) complete all as specified and as directed.

Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

Preparing new steel or iron surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for PCC solid blcok masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) all as specified.

M&L for rendering 15mm thick(10+5) in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions on finishing coat 5 mm thick only) over brick or concrete surfaces finished even and fair.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Surface dressing not exceeding 15 cm deep and geting out in soft/loose soil

M&L for form work to sides of rough finished concrete foundations, foootings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter compelte all as specified and as directed.

M&L for form work to posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat , fair finished surfaces .complete all as specified and as directed.

M&L for RCC M30 (design mix) (using 20 mm graded stone aggretate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified.

M&L for RCC M30 (design mix) (using 20 mm graded stone aggretate) in Columns, pillars, piers, posts and struts complete all as specified.

M & L for RCC M-30 design mix concrete (using 20 mm graded stone aggretate) as in Beams, cantilevers,bressummers, lintels over 1.5m span and the like all as specified

M&L for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips

M&L for TMT bars 6 mm to 8 mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire.

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

Material & Labour for Moorum/Red Bajri Filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering and complete

M&L for PCC 1:5:10 type E2 (40mm graded aggregate) as for floor surface complete all as specified

M&L for pre-construction ATT for treating the the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface

M&L for pre-construction ATT for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as spd

M&L for pre-construction ATT for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement.

Supply only water proofing compound conforming to IS-2645 1975.

S&F heavy duty vitrified tiles, Durastone, weather proof impact resistant, abrasion resistant tiles of size 600x600x10-15 mm or high dimension except thickness of any colour any design as approved.including screed bed 15mm thick 1:6, complete all as specified and as directed.

-Ditto all as per item No 26 above but in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) etc., complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply only 4mm thick figured glass, pin headed type glass ordinary quality fixed in aluminium ventilator all as specified and directed

Supply only 4mm thick sheet glass, ordinary quality fixed in aluminium window along F section all as specified and directed

M&L for 12 mm thick Pre laminated interior grade both sides laminated fixed with all necessary to alu door / window / partation & etc complete all as specified

Supply and fixing Solar control film 25 micron reflective type (gareware sun control or equivalent ) all as specified

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete in repairs

S&F floor door stoper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab, roof truss fixed with suitable size MS hook and fastening bolts etc as directed.

M&L 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws in ceiling confirming to IS-14862 and fixed with necessary clips all as specified.

S& F steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws

M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed.

M&L for 75mm thick Cement concrete in C1 type (1:3:6) using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement.

Material and Lobour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors

PVC (SWR) bends any radius 110mm bore

M&L PCC 1:4:8 D2 (40mm graded aggregate) 100mm thick for paving,sub base path etc

S & F Aluminium flat iron work in wind ties 25x6mm size fixed with 50mm/ 75 mm aluminium self staging screws with integral EPDM washer screwed in roof covering all as directed.

M&L For Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite .

M&L for sand cushion over sub base ,complete all as specified and directed by Engr-in-Charge

M&L for Machine pressed precast concrete interlocking paver block any shape with grey cement with pigment and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

M&L for PCC Type B-0, 1:2:4 (12.5 mm Stone Aggregate) , copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerb stop rounded or chamfered in edges as directed

M&L for point wiring with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/ PVC casing caping and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc) and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and as directed by Engr-in-Charge. (In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) Gl metal flush box and Modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (d) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment.

One light point controlled by one one way switch.

One ceiling fan/exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps independent.

One 3 pin socket outlet 5 Amps on the same board with other switches

All as per item No 60.00 above but cable with 4.0 sqmm for socket outlet 15 amps independent/Metal socket for geyser.

M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 6 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 6 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed. Note: (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (i) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.

All as per item No 66.00 here-in-before but with 1.5 sqmm cable complete all as specified and as directed

S&F modular switch one way 6 Amps, 1 module complete all as specified and as as directed.

S&F modular switch one way 16 Amps, 1 module complete all as specified and directed.

S&F modular socket, 2/3 pin 6 amps, 2 module complete all as specified and as as directed.

S&F modular socket, 2/3 pin 6/16 amps, 2 module complete all as specified.

Supply & fixing ceiling Rose, 3 terminal polycarbonate isolated body complete all as specified and as directed.

Supply & fixing LED lights fitting 1x 20W, 2000lm, CDL, surge protection of 2 KV, 4 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and fixing LED 18W inverter batten type fitting 3/4 feet long aluminium extruded housing, charging time 10-12 Hrs with 04 Hrs backup, IP-20, rated voltage 230 V, 50 hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt, CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 2500 lumens suitable wattage for efficiency not less than 100 lumens/watt having secondary optics min wattage 25 watt with ingress protection IP 65/66 and potted electronic driver of minimum IP 67 with THD less than 10% CRI>80, P.F>0.95, CCT 5700K, IK≥08 SPD of capacity 10 KV and testing on completion complete all as specified and as directed. complete all as specified and as directed.

M&L for Gi bracket for street light fitting made out of 25 mm bore pipe ISI marked light grade GI tube bent to shape required not less than 1.20m long fixed with and including MS flat iron clamps made out of 25x3 mm GI flat, bolts, nuts and washer etc., complete all as specified and as directed.

Supply & fixing ceiling fan 1200mm sweep with blades, suitable BLDC remote electronic regulator as per OEM design, down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 5 star rated, equipped with brushless direct current motor (BLDC) of wattage ≤ 28W including provision of cable from ceiling rose/connector to fan complete all as specified and as directed.

Supply & fixing MCB DB's SPN 4 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, 200 amps rated copper busbar including suitable size of copper lugs for fixing of cable complete all as specified and as directed.

Supply & fixing MCB DB's SPN 8 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, 200 amps rated copper busbar including suitable size of copper lugs for fixing of cable complete all as specified and as directed. Note(i) The cost for flushing of Distribution box in any type of wall and making good disturbed surfaces with existing colour shall be deemed to be included in the quoted rate. (ii) MCCB and MCB will be measured and paid separately.

Supply and fixing MCB SPN 40 to 63 Amps, 10 KA, C Curve, 230 Volts,50 HZ complete all as specified and as directed.

Supply and fixing MCB SP 6-32 Amps,10 KA, C Curve, 230 Volts,50 HZ complete all as specified and as directed.

Supply and fixing PVC insulated, sheathed two core aluminium conductor 10 sqmm complete all as specified and as directed.

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 mm x 4 mm by means of GI Welding made out of galvanised iron mild steel and 40 mm dia Gl pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with MS XPM Jalli, RCC 1:1.5:3 cover slab of size 300 x 300 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia Gl pipe medium grade for watering funnels, wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed by Engineer-in -charge. NOTE: (i) The earthing pit should be provided with proper earth pit and pit cover. (i) If the desired earth resistance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable.

M/s Prem Enterprise (BID ID -3446473)

M/s Ramesh Lal (BID ID -3446570)

SKV Engineering (BID ID -3446521)

SK ENTERPRISES (BID ID -3447341)

Reliance Sales Agency (BID ID -3447327)

M/s Gurunath Construction (BID ID -3447036)

M/s K Moorthi (BID ID -3447283)