C.O PHC Building at Lalsa Tehsil Rampur Distt Shimla HP

Amount

Removal of land slide slip clearance:- Removal of land slide in hilly area in ordinary rock not requiring blasting by mechnical means including cutting and trimming of slops and disposal of cut material with in lift upto 1.5m and lead upto 1000m as per technical specification 302.3.5 and 1611 including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Excavation for structures:- Earth work in excavation for structure in all depth as per drawing and technical specification Clause 305-1 including setting out, construction of shoring and bracin , removal of stumps and other deleterious material and disposal in all lead and lift including dressisng of sides and bottom and back filling in trenches with excavated suitable material . All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling and wedging out of rock( where blasting is prohibited) as directed by the Engineer -in - Charge.all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.

Drilling of holes in all kind of rock in all depths including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level:- Tor steel including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying Plain/reinforced cement concrete nominal mix M15 1:2.5:5 (1cement : 2.5 sand: 5 graded stone aggregate 20mm nominal size) in open foundation complete as per drawings and technical specification Clauses 802, 803, 1202 and 1203 including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

PREM CHAND