MODINAGAR SEEMANTARGAT KANHA GAUSHALA ME INTERLOCKING RELEYING KA KARYA.

Dismantling of old bricks laid on flat kharanja stacking of old bricks. ( Old Tiles Road)

Earthwork in cutting or in embankment in ordinary soil with Cartage of earth from 7 Km as per si no 253(a) , 261©

Concrete with 4 cm. guage stone ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1.including of all work complete.

Construction of granular sub base by providing well graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achive desire density complete as per technical specification clause as per MORD 401

M-150 Class B/W in 1:4 cement, coarse sand 1.25 F.M motar in foundation and plinth including supply of all materials, labour , T & P etc. As per P.W.D. S.I. No. 305(a)

Laying of 80 mm thick old interlocking tiles cement concrete paver blocks

Supply of 80mm thick precast cement concrete i-shape or zigzag interlocking paver blocks with top layer of mionimum 8mm thickness having plan dimensions 200x(160+120mm) with minimum 5mm thick topping of O.P cement smooth high gloss finish, skid resistant manufactured from rubber moulds through vibro-compression mechanism the compressive strength of concrete paver block shall not be less than 30 Mpa (M-30) and weight 5kg per No

12 mm thick plaster in 1:4 cement and coarse sand mortar on brick work minimum thickness not to be less than 1 cm. including supply of all materials, labour,T & P etc. As per SI No 584(a)

2.5 cm (1") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1") graded approved stone grit, laid in panels finished with 3 mm. (1/8") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brickballast 4 cm. (11/2") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

P.C.C work in 1:2:4 Cement, c/ sand, and 20 mm stone grit including supply of all materials, labour , T & P etc. As per S.I.No 279(a)