ADDN/ALTN AND SPECIAL REPAIRS TO ROOF COVERING OF BLOCK B OF SERA AT DMDE, RENOVATION OF LADIES AND GENTS WASH ROOM IN OFFICERS MESS AT CNA(DP) AND CERTAIN SANCTIONED WORKS UNDER GE(I) RND KANCHANBAGH HYDERABAD

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars complete all as specified.

M&L for brickwork with fly ash bricks subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling fibre sheets (corrugated,semi corrugated, etc) in roof coverings or wall claddings complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work complete all as specified and as directed

Dismantling timber fillets, rails, posts, rafters, purlins etc under 40 sq cm in section, framed work complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish away from MOD land complete all as specified.

M&L providing cement concrete type B1, 1:2:4 using (20 mm graded stone aggregate) in bands, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, holdfasts, kerbs and similar items including weathering, slightly rounded or chamfered angles and throating, as directed

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc and removing rubbish away from MOD land complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges and valley gutters, fixed with self tapping screws complete all as specified and as directed.

M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

Cleaning of roofs, removing debris, vegitation growth, soil deposition, twigs and similar items etc and removing all debris outside MOD complete all as specified and as directed.

S&F in repairs 25 mm bore dia steel water tubing medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down old pipes andcutting/chasing in wall/floor complete all as specified.

S&F in repairs 40 mm bore dia steel water tubing medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down old pipes andcutting/chasing in wall/floor complete all as specified

S&F 110 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings (such as bends, elbows, Tee, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc) complete all as directed.

S&F 150 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings (such as bends, elbows, Tee, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc) complete all as directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long, dia of neck 5 to 10 mm complete fixed in position all as directed

M&L for steel anchor bolts of length 15cm long, dia of neck 10 to 12mm complete fixed in position complete all as directed

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in columns, pillars coping etc all as specified and as directed.

Material and labour use & waste of form work to sides of pillars, posts, struts, piers, columns (Square or rectangular) and stanchions. for rough finished surfaces of concrete, complete all as specified and as directed

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates), n.exc 100mm thick as in levelling course over roofs complete all as specified and as directed

Supply and fixing Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed.

Supply and fixing Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia, as in stirrups spacers links etc quality conforming to TMT bars complete all as specified and as directed.

S&F in repairs 15mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc., complete all as specified and as directed . Make :- TATA / Jindal/ Prakash Note: Locations for taking down and fixing new pipe shall be at different.

M&L for 15 mm thick rendering in cement motar (1:6) on brick or concrete faces finished even & smooth without using extra cement, complete all as specified and as directed.

M/L for Rendering 5 mm thick in CM (1:3) on fair faces of concrete surfaces ceiling etc, finished even and smooth without using extra cement complete all as directed.

M&L preparation of new plastered wall surfaces and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- Tractor Emulsion of Asian Paints or techno commercially equivalent in Berger / Shaimar

M&L preparation of new plastered ceiling surfaces and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- Tractor Emulsion of Asian Paints or techno commercially equivalent in IBerger / Shaimar

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

M&L 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as levelling course all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing unserviceable tiles

S&F in CP waste coupling 32 mm dia complete all as specified and as directed.

S&F in angular stop valve brass chromium plated fancy type 15mm bore with wall flange of authentic single lever for iron pipe or for unions complete all as specified and as directed,

S&F in chromium plated 600mm long tubular towel rail with bracket complete all as specified and as directed,

S&F in chromium plated towel ring round fancy type or universal type fixed to wall with chromium plated brass screws complete all as specified and as directed

S&F in repair hand jet spray for toilet, cost copper alloy, chromium plated brass head for 15mm bore of pipe complete all as directed. Make : Jaguar, Cat No ALD-CHR 563 or equivalent in parryware

S&F in CP brass toilet roll holder with flap wall mounted fixed to wall with chromium plated brass screws complete all as specified and asdirected. Make: - Jaquar Cat Part No AQN 7753 or equivalent in parryware

S&F in repairs sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors 100mm dia complete all as specified and as directed

S&F in repairs CI bend, any radius for 100 mm dia of pipe complete all as specified and as directed

S&F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed

Taking down chowkhat with shutters (without taking off shutters from the frame) exc 1.50 sqm each but n. exc 4 sqm each complete all as specified and as directed

Taking down chowkhat with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and as directed

S&F solid UPVC Door frame of size 100mm x 75mm made out of colour UPVC profile single rebated to hold the uPVC door of 35mm thickness, supplied & fixing in opening as per specification & drawing Complete all as specified and as directed.

S&F factory made solid panel UPVC door shutter 35mm thick (Style) consisting of frame made out UPVC profile member complete all as per manufacturer instruction specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed

S&F stainless steel butt hinges, medium weight, size 100mm with ISI mark complete all as specified and as directed

S&F annodised aluminium handle, fabricated type of size 150mm complete all as specified and as directed

S&F in repairs 100mm dia CP grating etc complete all as specified and as directed

S&F in repairs 15mm bore bib taps, long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specifried and directed.

S&F in repairs CP waste coupling 32mm with complete all as specified and directed. Make: Jaquar No ALD 709 or equivalent.

S&F in repair, brass chromium plated soap dish complete all as specified and as directed. Make: Jaguar, Cat No 7731 or equivalent

S&F 450 mm long PVC connection with two connecting union complete all as specified and as directed.

S&F 140mm Aluminium alloy body floor door stopper, tongue, anodised, with hard drawn steel spring etc complete all as specified and as directed.

M&L for door closer hydraulicaly regulated designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed aluminium di cast complete all as specified and as directed

S&F in angular stop valve brass chromium plated fancy type 15mm bore with wall flange of authentic single lever for iron pipe or for unions complete all as specified and as directed.

M&L for aluminium anodised sliding window ( aluminium section weight not less than 0.55 kg/RM Powder coated with choclate colour) or as required by the user with 4.5mm thick tinted glass including aluminium beading, rubber beading all as specified and directed. Make - Jindal or equivalent,

S&F 30-40 mm dia wooden curtain single rod with wooden bracket and wooden curtain rings fancy type complete all as specified and as directed. Make- Vista or equivalent

S&F Aluminium Grill weight n.less than 1.2 Kg per Sqm incl aluminium frame etc complete all as specified and as directed

S&F in vitreous china urinals, stall type flat back size of 465X355X265mm white complete incl. Providing and fixing plugs, bedding urinals against. Wall in CM 1:2 securing urinal to plugs with and incl. 60mm long brass screws, pointing around urinal back in cement and fixing of waster pipe etc., complete all as specified and as directed

S&F in vitreous China wash basin, pistel colour, oval shape (excluding taps, stop cock) size 100x485mm incl accessories Make- Hindware/Cera - Cat part No -91045)

M&L for brick work with fly ash bricks sub class B Brick straight or curved on plan to any redius in half brick thick walls built in CM 1:4 complete all as specified and as directed

M&L providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manehole etc) shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed

M&L for granite slab (telephonic black) 20mm thick machine cut bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite slab over and incl 20mm thick screed bed in CM 1:6 incl grinding and polishing complete all as specified and as directed.

Cutting into existing manhole for connecting new drain,100 mm bore making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and as directed.

M&L of concrete bed to drain pipes 110mm bore including packing under and haunching agaisnt the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and as directed.

S&F chromium plated bottle trap for wash hand basin with inlet and out let screwed for pipe or connection including necessary packing union and cap and fixed complete all as specified and directed. Make- Sonata, Jaquar Catpart No ALD 769B or techno Commercial equivalent.

S&F fancy type corner self single 25cm self with CP brackets etc complete all as specified & directed. Make:- Hi life 3116932

S&F fancy type corner self single 30cm long self with CP brackets etc complete all as specified & directed. Make:- Hi life 3116932

S&F CP fancy type towel rack with bracket along with and fixed all as specified and directed Make : Sonata Cat Part No RL -1080

M & L Vitrified tiles 10mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchs dark shade over 15mm thcik screed bed in cm 1:6 complete all as specified and directed.

M&L Vitrified tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over with existing floor tiles 10mm thcik screed bed in cm 1:4 complete all as specified and as directed.

S&F in repair 8mm thick safety glass door open model No 1840G) with total Toughned /frosted glass clamping with CP brackets with supporting rods from each height 2100mm and 700mm door opening out side view, left hand out side open complete all as specified and directed, Make : Jaguar/safex or eqvt.

S&F one piece water closet with cistirn (72cmx37cmx76cm) universal type vitreous china wash down water closet pan INOX Pastel colour finish with 'S' trap 30 cms distance with Cat Part No 92043 (S-30) (green bldg certificate) complete all as specified and as directed, Make : Hindware/Cera or eqvt.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation etc and getting out in any type of soil.

M&L for PCC (1:4:8) type D2 in foundation filling and mass concrete (40mm graded stone aggregate) all as specified and as directed.

Removal of excavated material not exceeding 50m and deposited where directed at level not exceeding 1.50 Mtr above the starting point.

Returning fillng in, including spreding, leveling, watering and well rammingin layers not exc 25cm thick all as specified and as directed

M&L 75mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregate ) in plinth protection complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate ) as in sub base complete all as specified and as directed.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) finishing cement concrete surface even and smooth complete all as specified.

M&L Framed work as in gates of angle or other section with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as directed.

S & F Anodised aluminium snap grid frame work for false ceiling Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 10 mm thick gypsum board of size 600mm x 600mm complete all as specified and as directed.

S&F 105x60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as directed.

S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete.

S&F 125mm size aliminium handles, cast type, anodised complete all as directed.

S&F 150mm long aluminium anodised , barrel tower bolts of extruded section complete all as directed.

S&F UPVC hung/sliding type window with 4mm thick plain glass and galvanised mild steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.18mm as mosquito net of approved quality including necessary hinges/rollers, handles and locking system including taking down old u/s windows complete all as directed.

M&L for forming dovetailed 5 cm deep cavities, n exc 10cm x 10cm at top and 20cm x 20cm at bottom in concrete cast-in-situ (plain or reinforced) for holding down bolts, etc. for machinery, stanchions, etc. including temporary forms or moulds and carefully grouting round bolts (after fixing) with cement concrete 1:2:4, type B1, (20mm graded stone aggregate) or cement mortar 1:3, complete all as directed.

M&L for providing parking tiles using chemical grout complete all as specified and directed.

M&L cutting holes into or Exc. 150 sq. cm but n exc 400 cm. through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down carefully of any type point wiring light fans socket or power complete fitting such as switch ceiling roses, pendent, regulator, sockets and light fittings of any type/capacity etc , and making good disturbed surface of wall floor etc complete all as directed.

Material and labour for point wiring complete with ISI marked 1.5 Sqmm PVC insulated unsheathed multistranded single core cable with copper conductor (FRLS) 1100 volts grade drawn through and including PVC rigid conduit 20 mm or higher dia ISI marked as required at site including conduit accessories such as Junction Boxes, Inspection Covers etc, concealed/surface type on stone/brick masonry walls, roofs, floors etc by means of saddles and clamps etc including PVC gang boxes as required at site for concealed/surface conduit wiring and modular plates & covers as required at site for housing switches sockets, regulators etc. including providing of 1.5 Sqmm PVC insulated multistranded unsheathed FRLS copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for and connecting up complete for the following:-

One light point controlled by one 5 Amps one way switch

One ceiling fan point /Exh fan point controlled by one 5 Amps one way switch and regulator

One 3 pin 5 Amps switch socket outlet point on independent board

S&F socket outlet 2/ 3 pins 6 Amps ISI marked modular type 2 module complete all as directed.

S&F Modular switch one way 6 Amp 1 module complete all as directed.

Supply & fixing of heavy duty exhaust fan, single phase,50Hz, 230/240 V of size 230 mm sweep, with minimum 900 rpm with louvres, and wire mesh for suitable size to be fixed before fixing of louvers,including necessary wiring along with necessary accessories etc, include dismatling old exhaust fan complete all as specified and directed. Note: Old unserviceable exhaust fan is the property of MES and has to be deposit at AGE E/M No.I store yard. Make- Havells/crompton

K P R ENTERPRISES