Karnataka

Active

Works

Water supply/sewage lines

Providing & Construction of RO Plant & Building at Govt Higher Primary School at Shivapur village in Shahapur Taluka of Yadgir Dist. (SC RESERVED)

Rural Drinking Water and Sanitation Department

RWSSD Division Office Yadagiri | Yadgir, Karnataka

Amount: ₹12.6 LCloses: 11 Sept 2026Due tomorrow

Timeline

Published2 Sept 2026
Closes11 Sept 2026

Tender Value

₹12.6 L

EMD Value

₹18,750

Closing Date

11 Sept 2026, 4:30 pmDue tomorrow

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

MANJULA AE

Office Number

Mobile Number

Work Description

Providing & Construction of RO Plant & Building at Govt Higher Primary School at Shivapur village in Shahapur Taluka of Yadgir Dist. (SC RESERVED)

Tender Information

Tender ID

RWSSD/2025-26/WS/WORK_INDENT9738/CALL-3

Reference Number

RWSSD/2025-26/WS/WORK_INDENT9738/CALL-3

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Electronic Documents, First(One Cover)

Location

RWSSD Division Office Yadagiri

Source Website

Subscribe to view

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Third party consultants may be engaged for checking quality and quantity of work and to prevent any misuse. Proper reporting methods, through these agencies and their comments to be reviewed / addressed immediately at District level. Quality of work is of most importance.

If any dates mentioned above happens to be a holiday, the next working day and the same time and venue holds good in lieu of the date mentioned.

The contractor should scan the work done certificate, GST number, PAN and Registration certificates and other documents. If not scanned above certificates such tenders will be rejected.

As per Karnatka State Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter No.PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare Fund. & Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

The authority competent to accept the tenders shall have the right of rejecting all or any of tenders without assigning any reasons and will not be bound to accept the lowest tenders.

The work will be placed under third party inspection.

The contractor should have yearly turnover not less than the Amount put to Tender in any One financial years out of last 5 financial years. i.e. 2020-21, 2021-22 , 2022-23 , 2023-24 and 2024-25(Turn over Certificate) (Certified by Chartered Accountant)

The contractor should upload the Line of Credit for value not less than 30% of the Amount put to Tender.

Each Tenderer shall own or make arrangements for procuring the machineries required for executing the work & all the materials should be brought and used by the contractors and materials will not be supplied from the Department.

The work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Contractor should made an agreement within 14 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost.

The contractor must scan the Assessed available tender capacity (AxNx2.5 - B)

Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims should be considered)

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

Corrigendums / modifications / correction, if any, will be published in the website only.More details should be collected from the office at working hours.

The contractor who bid under reservation works (SC&ST) should submitte the cast retificate & residentional proof ( atleast for 10 years in Karnatak) as per the rules of Govt of Karnataka No: FD 876 Exp-12/2017, Bengaluru, Dated : 15-09-2017

Tenderer must submit his present accurate postal address and phone / cell phone number

The Employer reserves the right to Reject any or all Tenders without assigning any reason.

The Department is not responsible for any delay in accessing e-procurement portal.

The contractor should follow terms and conditions as specified in standard bid document KW 1, 2, 3 or 4 whichever may be applicable

After opening of Technical bid, eligible bidders work done if required will be sent to work done verification to concerned authority, more than 7 days for conformation delay of work done will be rejected.

All other conditions as per bid document and tender conditions

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form.

As per FD order No: FD 876 Exp-12/2017, dated:15-09-2017, clause 27(A) f, if no qualified tenderers belonging to the Reserved Category participate in the bid in two attempts, then these works shall be tendered as Open category. But this tender is recalled becouse of after appelled so tender belongs to SC Reserved Category

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹18,750

Important Dates

Last Activity

4 Sept 2026

Published

2 Sept 2026

Download Ends

10 Sept 2026

BOQ Preview

•

Providing and Construction RO Plant To Govt Higher Primary School At Shivapur Village In Wadgera Taluka Of Yadgir Distirct

•

BOREWELL WITH PUMPING MACHINERY Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata includingover burdern upto 20 m. Fixing...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata includingover burdern upto 20 m. Fixing of casing pipes, collars and ca...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to worksite with testing of as per instructions of engineer inchar...

•

Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x2.5 ...

•

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 63 mm

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 65 mm.

•

Supply and delivery at site of brand new best make non-return valve asper IS 778/1984 with ISI Mark and as per its latest amendments 65 mm

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...

•

Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc., compl...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to mete...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

CONSTRUCTION OF ROOM Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

KSRB 2-2.1: Providing and laying in position Reinforced cement concrete for all Foundation works.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. The granite/trap/basalt crush...

•

KSRB 11.32 : Providing Thermo-Mechanically Treated bars of grade Fe-500D ormore Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring...

•

KSRB 6.32: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conformi...

•

KSRB 1.9 : Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding.20cm in depth, consolidating each deposited ...

•

KSRB 18-3.1 : Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaff...

•

KSRB 9.11: Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours,...

•

KSRB 8.72.1 : Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 litrs/10 m² complete includi...

•

KSRRB 8.49: Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly.cleaning the surface to remove all dirt, dust and ...

•

KSRB 11.6.1: Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mo...

•

Electrical Supply Supplying Heavy Guage PVC Conduit pipe 19/20 Dia 2mm thick confirming to IS 2509 with suitable size bends metal /PVC junction boxes ,adhesive paste etc.., and running before concreti...

•

Wiring for lighting/Power circute using one of FRLS PVC insulated 1100V Grade Multi Starded copper with low conducter Resistence single core wire is open or concealed system of wiring with Specified I...

•

Supplying & adopting Loop System of in Existing PVC Conductor/Casing ,Caping Using 1100 V Grade copper conductor Flexible multi strand FRLS PVC insulated 2x1 Sqmm able with low conducter Resistence s...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Supplying & Fixing Superior Quality modular switch mounting poly corbonate plate with Necessary supporying Backplate with Required Nos of Machine Screws Bolts ,Nuts Etc., Complete on the Existing Meta...

•

Supplying & fixing retrofit type -PL- LED Lamp .......W LED linear source with CCT 6500 degree K, CRI grater then 70%. efficacy grater then 80 lumen per watt, life grater then 25000 burning hours and...

•

Supplying& Fixing miniture circute breaker Existing MCB distribution Board using necessary fixing Material & C Type curve Indictor ON/OFF Energy cross-3 with short circute breaking capacity of 10K & c...

•

GESCOM Deposite Charges for RR NO.

•

Supplying & Fixing Ceiling Fan.

•

RO UNIT Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping,product water tank on single phase power supply a...

•

Rising Main Earth work excavation for pipeline trenches in all kinds of soils bymechanical means above 600 mm trench width as per drawing andtechnical specifications, including setting out, constructi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

•

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for 50mm

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KKRDB RE-CALLED NOTIFICATION.pdf

Others - TENDER NOTIFICATION • 0.71 MB

00 loc.docx

Others - LINE OF CREDIT • 0.01 MB

KKRDB TENDER CONDITIONS 2026-27.pdf

Others - CONDITIONS • 1.31 MB

kw-1.pdf

Tender Document • 0.60 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .