REPAIR,MAINT OF HARD STANDING, APPROACH ROAD, DRAIN IN MRC AND BR REPAIR WORKS IN MES AND OTHER BLDGS IN AGE BR-I AREA

Amount

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of brick masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) demolition of stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

All as per Srl item No.2 above but except stone -ditto- Note:-Serviceable stones obtained from demolition shall be re-used in this item

M&L for brick work with sub class 'B' brick in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall including demolition of brick masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete including demolition of cement concrete unreinforced in ground floor of pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on otherthan fair faces of brick / concrete surfaces finishing the surfaces even and smooth with out using extra cement etc complete all as specified and directed

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. of walls complete all as specified and directed. Make Asian ACE or equivalent make as approved by GE

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L for mild steel rolled sections/hallow section as in main and cross beams, hip and jack rafters; purlins Posts where connected to common rafters and angle cleats or other connecting plates incl wind ties etc Fe410 Gde E-250) Quality A complete all as specified and directed

S&F 6mm thick Asbestos cement, corrugated or semi corrugated sheets in roof walls etc fixed with J / L bolts including dismantling of Asbestos cement ( corrugated, semi corrugated, ec) sheets roofing complete all as specified

Takind down and refixing Asbestos cement, corrugated or semi corrugated sheets in roof walls etc fixed with J / L bolts complete all as specified an directed

S&F 6mm thick Asbestos cement two piece adjustable plain wing ridge fixed with J / L bolts including dismantling of Asbestos cement ( corrugated, semi corrugated, ec) sheets roofing complete all as specified

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering including all necessary items for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed

M&L for suspended false ceilling comprising of 4mm thick non asbestos fibre cement bulding boards of size 595mmx595mm, fixed or laid/inserted to powder coated GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 4mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long incl dismantling of any type or ceiling boards in thickness incl cover fillets including dismantling of any type of ceiling boards in any thickness incl cover fillets complete all as specified and directed

M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified and directed

M&L for joint free non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed layer in CM 1:6 including dismantling old tiling complete all as specified and directed.

All as per Srl item No.18 above but in dado / skirting laid over and including 10 mm thick rendering in CM 1:4 -ditto-

M&L for nonskid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed layer in CM 1:6 including dismantling old tiling complete all as specified and directed.

M&L for glazed ceramic joint free coloured tiles on vetical surfaces size 6000x300x7mm thick laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles including dismantling old tiling complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each incl removing from site, complete all as specified and directed.

Taking down chowkhats or frame (with out taking off shutters from the frames) exc 1.50 Sqm but not exc 4 Sqm each with shutters including removing from site complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed

Taking down shutters of any description not exc 1 Sqm complete all as specified and directed

M&L for second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints complete all as specified and directed.

Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed..

S&F 35mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20 (a) complete all as specified and directed.

S&F 30mm thick second class soft wood plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F Steel ventilators with top hung shutter including two pairs of mild steel cup pivots, catch spring and pulley wheel complete all as specified and directed.

S&F sheet glass, 3.0 mm thick ordinary quality fixed wdn beads / oil putty in square not ex 0.50 sqm in each pane complete all as specified and directed.

S&F in repairs 3.0 mm thick figured glass, pin head type and fixed wdn beads / oil putty in square not exc 0.50 sqm in each pane complete all as specified.

S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with SS staples complete all as specied and directed.

S&F factory made PVC door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm Prelam PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specied and directed.

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back incl 3 Nos 100 mm stainless steel butt hinges complete all as specified and directed.

S&F in repairs stainless steel grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm), stainless steel wire mesh 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specied and directed.

S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend complete all as specified and directed.

S&F in repair vitreous China WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S & F in repairs brass chromium plated shower rose fancy type , as approved , with or without swivel joints, including fixing to steel pipe fixed complete all as specified and directed.

S&F in repairs concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&F in repairs 15 mm dia Angle cock external threaded,chromium plated ,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for union complete all as specied and directed..

S&F in repairs bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs PVC connections 15mm bore size450 in length with both end brass/pvc high quality nuts complete all as specied and directed.

S& F in repair stainless steel plate rack of Size 900 x 600x 250mm complete all as specied and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, coupling and down take waste piple ; including bedding in CM on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for 18 mm to 20 mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for vertical surface of pillars, floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over and including 20 mm thick screed bed or bedding layer of CM (1:4) including pointing in white/colour cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor including dismantling old Granite slab complete all as specified & directed

M&L for machine cut Cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling old stone slab complete all as specified & directed

S&F MS butt hinges 100 mm size medium weight, coled rolled and fixed with screws complete all as specified & directed

S&F MS butt hinges 125 mm size medium weight, coled rolled and fixed with screws complete all as specified & directed

S&F Stainless steel butt hinges 100 mm and fixed with screw complete all as specified and directed

S&F for 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified & directed

S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 150 mm fixed with steel screws complete all as specified & directed

S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified & directed

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F in replacement 15mm Galvanised mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed

Taking down and re-fixing 15mm GI tubing medium grade to walls and ceilings or laying in floors complete all as specified & directed

S&F in replacement 20mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed

Taking down and re-fixing 20mm GI tubing medium grade to walls and ceilings or laying in floors complete all as specified & directed

S&F in repair tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified & directed

S&F in repair 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified & directed

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls complete all as specified & directed

S&F PVC (SWR) bends 110 mm dia complete all as specified & directed

S&F PVC (SWR) bends 110 mm dia with access door complete all as specified & directed

S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified & directed .

S&F in repairs 18/19 mm thick pre laminated paticle board, as in cupboards, shelves, pelmets etc sexterior grade, pre laminated one side decoraded choice lamination and other side balancing white lamination cut to required size and fixed to frame complete all as specified & directed

S&F 100mm long Hasp and Staple, safety type Aluminium with MS hinge pin incl bolt to hinge plate and fixed with screws complete all as specified & directed

M&L for applying one coat of systhetic enamel paint surfaces of any description, over 10cm width or girth, not otherwise described on old painted surface including preparation of old wooden surfaces complete all as specified and directed

S&F in repairs continuous (piano) hinges, width of flaps (when open)- 30mm mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) etc on roof top as a leveling course / padding to maintain the slope, finished the surface even and fair without using extra cement including demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. .

S&F glass dividing strips, 3mm thick, 38 mm width complete all as specified and directed.

M&L for machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade, laid on stone dust cushion complete all as specied and directed. Note:-Stone dust shall be measured and paid separately

M&L for crushed quarry stone dust filling under floors or in foundation or cusion bed to lay over paver blocks complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in surface channes or drain including demolition of cement concrete unreinforced in ground floor of pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in cement mortar 1:4 on brick work/stone surfaces finishing the surfaces even and fair complete all as specified and directed

M&L for point wiring for the following with 1.5 Sqmm PVC insulated FR, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC trunking of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and directed:-

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin, 5 Amp socket point with other switch on the same board

All as per Srl item No.79 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and directed:-

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.81 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable continuous earth lead

S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed .

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed

S&F modular bell push 6A one module complete all as specified and directed

S&F switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed

S&F switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed.

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed .

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S&F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.

S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed.

M&L for surface conduit submain wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit PVC trunking of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down old unserviceable submain wiring complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down old unserviceable submain wiring complete all as specified and directed.

S&F in repairs including testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed.

S&F in replacement LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make: - Havells cat part no LHEXCGP7UN5W013/BAJAJ Cat Part No BIBWP10WLED /CG Cat Part No LBHE-10-CDL.

S&F in replacement TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj Cat Part No BCLSB 20 WH/ CG Cat Part No LCTC-18-CDL

S&F in replacement box type LED optic fitting 1x9 Watt 2 feet box typecomplete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7IN1W009/ Bajaj Cat Part No BCLSB10WH/ CG Cat Part No LCTL-9-CDL.

S&F in replacement PVC insulated and unsheathed single core multi stranded copper conductor 1.5 Sqmm (Nominal Area) drawn in existing conduit / batten / surface all as specified and directed.

S&F in replacement PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site complete all as specified and directed

S&F in replacement PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed.

M/S PRAKASH RAIKWAR TRADERS AND CO

v k builder

pal enterprises

dipangashu barick and associates

siddhant construction