Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹50.9 LAccepted-AOC | 1 | Accepted-AOC lowest bidder | |
| 2 | 2₹52.9 L+₹2.0 L (3.95%)Rejected-Finance BARNALA | BARNALA | PUNJAB | 148024 | 2 | Rejected-Finance Higher bidder | |
| 3 | 3₹53.6 L+₹2.7 L (5.35%)Rejected-Finance | 3 | Rejected-Finance Higher bidder | |
| 4 | 4₹55.7 L+₹4.8 L (9.44%)Rejected-Finance | 4 | Rejected-Finance Higher bidder | |
| 5 | 5₹56.7 L+₹5.9 L (11.6%)Rejected-Finance | 5 | Rejected-Finance Highest bidder |
Tender Value
₹55.1 L
EMD Value
₹1.1 L
Closing Date
16 Dec 2021, 10:00 amClosed
Divisional Engineer,
Divisional Engineer, PWRMDC Lining Division No. 6, Rampura Phul.
Estimate for relining /UG Pipe Line of w/c of O/L RD 58243-L Dhanoula Disty
2021_WR_76179_33
72021
Open Tender
Civil Works
Item Rate
180 days
barnala
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,000
₹1.1 L
Yes
Divisional Engineer,
4 Feb 2022
10 Dec 2021
16 Dec 2021
10 Dec 2021
16 Dec 2021
10 Dec 2021
11 Dec 2021
Amount
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, efilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect up to 1.5 mtr. depth. item 28.2-a (i) CSR 2020.
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, efilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.Earthwork exceeding 1.50 mtr. depth but up to 2.25 mtr. item 28.2-b (i) CSR 2020.
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.Item 6.6 CSR 2020.
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth.Item 11.3(i) CSR 2020-10% of labour rate
10 mm thick Cement Plaster 1:4 - scaffolding Rs.1.26.Item 15.6 CSR 2020.
10 mm thick cement plaster 1 : 4 on floors.Item 15.38 CSR 2020.
Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement (C.S.R.2020 item 10.13 (a) i & M42 b )
Cement Conc.1:2:4 with stone ballast or shingle mixing by manual means ( C.S.R. item 10.13 (a) i )
Cement conc.1:4:8 with brick ballast ,40 mm gauge mixing by manual means (C.S.R. Item No. 10.10 (a) i )
Providing lowering & jointing RCC pipe 400 mm dia NP2 plain end with collar as per I.S.458- 2003 in to trenches & jointing same to correct allignment CSR item No. 20.13 (c ) & as per rates sanctioned by controller of stores vide endst. No.1/25/2020-21/Cont./Engg./3892-98,Dt.27-04-2021 for Period 27-04-2021 to 26-04-2023.
Providing lowering & jointing RCC pipe 450 mm dia NP2 plain end with collar as per I.S.458- 2003 in to trenches & jointing same to correct allignment CSR item No. 20.13 (c ) & as per rates sanctioned by controller of stores vide endst. No.1/25/2020-21/Cont./Engg./3892-98,Dt.27-04-2021 for Period 27-04-2021 to 26-04-2023.
Providing Lowering, jointing and cutting of RCC pipes 150 mm dia NP-2 plain ended with collar as per I.S.458-2003 for vent pipe into Trenches and laying same to correct alignment ( @3 metre / vent pipe) CSR item No. 20.13 ( a ) & as per rates sanctioned by controller of stores vide endst. No.1/25/2020-21/Cont./Engg./3892-98,Dt.27-04-2021 for Period 27-04-2021 to 26-04-2023.
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 2mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design. Item 29.35 CSR 2020.
Providing & fixing alfa valve 400mm with lifting arrangement to open/shut the pipeline consisting of channel for a length of 1.46 m of size 3"x1.5" ,pipe of dia 3/4" of length 3 m ,plate ,rod & nut bolt complete in all respect approx. weight 45.17 Kg.
Providing & fixing one No.Alfa Alfa valve 400 mm in size weighing 29 Kg. with 25 mm dia of rod,375 mm length of rod,40 mm dia of brass bush & 28 mm width of brass bush Rates of Alfa valves as per rate contract for supply of of Alfa Alfa Valve for the period from 15-09-2020 to 14-09-2021 (without GST) approved by The Controller of Stores Punjab vide No.1/23/2019-20/Cont/Engg/9512-18 Dt.15-09-2020 .
Providing & fixing alfa valve 450mm with lifting arrangement to open/shut the pipeline consisting of channel for a length of 1.46 m of size 3"x1.5" ,pipe of dia 3/4" of length 3 m ,plate ,rod & nut bolt complete in all respect approx. weight 49 Kg.
Providing & fixing one No.Alfa Alfa valve 450 mm in size weighing 39 Kg. with 25 mm dia of rod,450 mm length of rod,50 mm dia of brass bush & 40 mm width of brass bush Rates of Alfa valves as per rate contract for supply of of Alfa Alfa Valve for the period from 15-09-2020 to 14-09-2021 (without GST) approved by The Controller of Stores Punjab vide No.1/23/2019-20/Cont/Engg/9512-18 Dt.15-09-2020 . .
Centreing & shuttering for Concerte faces as per item (9.1) of CSR
Wrought iron & Mild steel ladders, framed grills,gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in in pos
Dismantling of Brick work in cement (CSR 2020 Item 8.5 (b) )
THE DHILLON PATTI COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED
THE GURU KIRPA CO OP L AND C SOCIETY LTD
THE NANDGARH CO OP L AND C SOCIETY LIMITED
THE KARIAN COOPERATIVE LABOUR AND CONSTRUCTION SABHA LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .