Repair of 500 MT godown along with construction of toilet and bore well at Padampur

Removing old cement plaster from wall including racking out joints 12mm deep & removing the debris with in 50mt lead.

Dismantling and removing 2.5 cm thick A.S flooring including stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling removing cement concrete flooring 7.5 cm to 10 cm thick including stacking the useful materials for reuse and removing the debris withen 50 mt lwad. Per 1sqm

Dismantling brick or stone masonary in lime or cement mortar above 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead per 1cum

Dismantling G.C.I or A.C sheet roofing after carefully removing nut & bolt including stacking of materials for re-use & removing the debris with in 50 mt lead

Earth work excavation in hard or gravelly soil within initial lead of 50 m and initial lift of 1.5 m including rough dressing and leveling the bed.

Filling in foundation with muroom well watered & rammed including cost,conveyance,royality & taxes etc. complete to work site.(for 100 cum)

Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crusing strength not less then 35Kg/cm2 in cement mortar (1:6) in foundation & plinth ,super structure/ cum.

Foundation & plinth

Upto 3mtr height

Above 3mtr height

12mm thick cement plaster (1:6) on brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm

16mm thick cement plaster (1:6) on brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm.

upto 3mtr height

Above 3mtr height

20mm thick greading cement plaster (1:4) over roof salb including all cost conveyance royalty & taxes etc.

R.C.C work of M-20 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.

Column & beam

Plinth band

Roof slab & chajja

Providing M.S reinforcement for RCC work including cutting, bendind, binding & tying the grills and placing in position including cost of binding wire 18 to 20 gauge as per drawing & technical specification.

C.C (1:3:6) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C

C.C (1:2:4)with 12mm size HG chips with punning including all cost, conveyance, royalty & taxes etc.comp.to work site as per the specification approved by the department & direction of E.I.Ccost of binding wire 18 to 20 gauge as per drawing & technical specification.(Taking output - 1MT ) specification approved by the department & direction of E.I.C

Cement punning including cost & conveyance of cement per sqm.

Supplying,fitting & fixing big six or trafford A C Sheet including fixing of ridges, wind ties, roof drilling hole in wind ties etc excluding cost of A.C sheet etc.

Ridges

Supplying & painting coal tar based Epoxy Shalipoxy CTE HB in two coats over floor & wall per sqm.

Wall painting two coats with weather coat painting of approved shade on new work to give an even shed.Per 1sqm.

upto 3mtr height

Above 3mtr height

Finishing walls with water proofing cement paint of approved shade on new work two coat to give an even shade per 1sqm.

upto 3mtr height

Above 3mtr height

Painting two coats with any approved paint on new/old wood/iron work including cost of paint & labour. per 1sqm .

Ground floor

1st floor

Supplying,fitting,fixing of M.S shutter with frame with M.S angle of (35 x 35 x 6)mm and shutter sectionof 30 x 30 x 5mm with weldingof 25 x 6mm flat and welding of 16 gauge C R Sheet with arrangement of clamp,fitting of 3 nos 4" hinges,1 no of 2"hinges and 300mm x 16mm M.S Aldrop with 8" tower bolt including cost,conveyance,taxes of all materials labour T & P etc.required for the complete in all respect. etc.

Cleaning and gubbing land including uprooting rank vegetation grass, bushes, shrubs, saplings and trees girth upto 300mm, and disposal of unserviceable materials and stacking of serviceable materials, upto a lead of 1000 mtrs including removal and disposal of top organic soil not exceeding 15 cm in thickness.

Neutralization of outside & inside surfaces with 10% HCL solution, soaking & cheking for residuals, water wash & soaking again of the brick works complete in all respect. (As per market Rate)

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS:15477 of 3mm thick bed of filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC.Data for 10 sqm, vide page - 235 of A/R - 2006, item - 1,in other building items chapter.

Fixing tiles in dados striking and rises of steps on 12mm cement plaster (1:3 ) jointed with neat cement slury mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles per 1sqm.

Supplying, fitting & fixing 30cm x 30cm / 40cm x 40cmn Ceramic Floor tiles of premium grade having thickness 7 mm to 8mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC.Data for 10 sqm, vide page - 235 of A/R - 2006, item - 1,in other building items chapter.

Supplying,fitting,fixing of M.S grill gate/ ventilator with cost,convayance,taxes of all materials, labour, T & P etc .required for the complete in all respect.(MR)

Drilling of bore well any where in Padampur including transporting from one place to another within Padampur in alluvial soil sedimentary strata of clay and sand stone shal pebbles boulders etc. By first taking a pilot bore of 140/150 mm dia and then enlarging to required diameter direct or reverse rotary mud circulation method using rotary rigs ,fuel labour and drilling bentonite and water required for.

Supplying of Bentonite Earthing powder for drilling 150mm dia Bore well etc.

Supplying and delivery of single phase 1.0 HP panel board with two level guard and auto start suitable for 1.0 HP Submersible pumpset.

4 Sqr .mm x3 core cable

50MM Pvc pipe

50mm Pvc Nipple

50mm Pvc Elbow

Bore well cover plate

Plastic wire

50mm gate valve

Labour charges for erection of 1.0 HP submersible pumpset deep bore well type vertical inculding fixing and joining submersible cableup to the starter and all materials labour charges etc.

Providing 125mm dia plastic casing pipe with transpotation etc.

Providing Air compressor for clean borewell.

Providing rcc ring with cover for over head tank with connection pipe including cost , lab, con, tax, etc, complete.

Please Enable Macros to View BoQ information