Provision of Electrical Installation and Fans and associated Electrical works at Security Test Lab, 6th Floor, TEC, K. L. Bhawan, New Delhi

SUB-HEAD-I (DSR ITEMS) Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

6 x 1.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 5/6 amps switch

b) 5/6 amps socket

c) 15/16 A switch

d) 6 pin 15/16 A socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm

Sub Head:II (Market Rate Items) Replacement and fixing of following sizes of pvc casing and capping for covering of loose wires etc.complete as reqd. (Make: AKG, MK)

25mm x 16mm

32mm x 16 mm

50mm x 16mm

Replacement/ fixing of 6 Amp 4 outlet power strip controlled by common switch with surge protection suitable for 230 Volts, 50 Hz Single phase AC supply having connecting lead, safety fuse etc. complete as reqd. (Make: Havells/ Anchor/ Philips)

Supplying and fixing of following Flexible pipe for covering of loose wires etc. complete as reqd.

25 mm PVC

Providing and fixing of PVC insulated, PVC sheathed copper conductor armoured cable of 1.1KV Grade on surface/wall i/c making connections, testing etc complete as reqd. (ISI Make)

4 x 10 Sq mm

Replacementand fixing of following type exhaust/ wall/ ceiling/ pedestal fans suitable for operation on 230V, 50 Hz single phase AC Supply i/c dismentaling/ refixing, minor civil works if reqd. making connection testing and commissioning etc complete as reqd. (Make: Crompton/ Bajaj/ Almonard/ Havells/ Usha/Orient)

400 mm sweep, 1350 rpm wall fan

Providing and fixing of energy efficient 1200mm, 6500K, 20 watt LED tube with suitable holder for connection of light in existing fitting etc complete as reqd.a) Wattage : 20 Watt + 10% b) System lumens efficacy : Not less than 110 lumen per watt c) Driver efficiency : Not less than 85%, d) THD : Not more than 10%, e) CRI : Not less than 80 f) LED Life : Not less than 50000 hours @ LM 70% g) Colour temperature : 5500 - 6500 K h) Operating voltage range : 160 Volt to 270 Volt i) Installation type : Wall / Ceiling surface installation j) Material of construction for housing : Polyuminum die cast k) Internal surge protection : Not less than 2.5 kV l) Ingress protection (IP): Not less than 20. (Make: Phillips, Havells, Wipro, Bajaj)

Providig and fixing of streak batten suitable for twin LED Tube light with integral LED driver available in double side connection with Fixture size: (LxWxH) in (1233x71x46) mm (for 2x20 W) for fixing of existing 2 Nos 20 W LED tube i/c testing connection etc complete as reqd.

Supplying and fixing of wall mounted relay operated line Voltage Stabilizer suitable to work for incoming main from 150 to 270 Volts, Output Voltage between 195 to 245 Volts of 4 KVA with High and Low Voltage cut-off and Time Delay Relay etc. complete as required. (M/S Bluebird/ Logicstat/Microtek make).

Note:- 1. The GST / other Input Tax Credit (ITC) taxes shall be quoted by the firm as applicable as per latest amendments of GST Rules. 2. The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit. 3. Servicing Scrap items will be credited to the firm. The rate may be quoted accordingly. 4. Bidder must mandatorily quote for all GST components (CGST, SGST, and IGST) as required. 5. If annual maintenance contract charges are required to be quoted as per SOW, basic charges should be shown in column 4 & the Goods and Service Tax (GST) in column 7 to 12. 6. The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services. 7. In case, dealer is registered under compounding scheme or any rule/notification where the BSNL is not eligible for input tax credit then the bidder should not disclose any amount in column 7 to12 & 14. 8. % age Rate of FF & Packing should be shown of basic unit price excluding all taxes & charges (i.e. as %age of col.4). 9. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc. 10. Bidder must mandatorily mention HSN & SAC numbers.15. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST. Declaration by Bidder: 1. We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date. 2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 14 above are admissible as per GST Laws. Name of bidder: Seal of Company:

M/S R K JATOLIA ENTERPRISES

kashyap electricalsd

S.K.ELECTRICALS