Construction of Seed Storage Godowns at Mudghat Patnagarh.

Earthwork in excavations of foundation trenches in all kinds of soil including morrum, stoney earth and earth mixed with boulders except sheet rocks and boulders requiring blasting, including dressing and levelling the bed up to required level and depositing the excavated earth away from the site within 50 m initial lead and 1.5m initial lift, T & P centring and shuttering if required etc complete as directed by Engineer in charge.

Supplying, filling in foundation and plinth with clean course river sand including watering ramming with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge (measurement will be taken for finished complete section only)

CC (1:4:8) in foundation and floors using 40mm size crusser broken granite stone metal of approved quality from approved quarry including lowering laying of concrete, watering, curing etc, compacting to required level laid in layers not exceeding 0’-6” thick, with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge.

RCC work with M25 Grade concrete with 20mm and down graded crusher broken chips having a minimum crushing strength in work test (150 kg/ sqcm) in 15 cm cubes after 28 days curing after mixing and test conducted in accordance with IS-456 and IS-516 including hoisting, lowering, laying concrete, compacting by using vibrators, centring and shuttering and finishing the exposed surface smooth, providing proves and beads wherever necessary with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge.

In column footing

In column

In plinth beam

In tie beam

In slant of Gabble wall

Cutting, straightening, coiled or bend up MS rod or Tor steel, bending binding, cranking, hooking, welding or jointing if necessary and tying the grills and placing in position for RCC work in all floors and for proving fan hooks, hoisting lowering, laying for concrete with cost of reinforcement, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge. (payment will be made on weigh of steel only basing on the coefficient of MS or Tor steel bar approved by competent authority and no separate payment will be made for cost of binding wires)

Fly Ash Brick masonary in (1.6) cm in foundation and plinth in ncluding scaffolding, watering, curing etc required for the work with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge. (in foundation and plinth)

Fly Ash masonary in (1.6) cm in superstructure in ncluding scaffolding, watering, curing etc required for the work with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge. (in super strucure)

12mm thick cement plaster (1:4) in all floors finishing smooth to brick walls after racking out joints etc, including watering, with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge. Outside wall

12mm thick cement plaster (1:4) in all floors finishing smooth to brick walls after racking out joints etc, including watering, with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge. inside wall

Supply of all materials, fabricating MS GRILLS as per direction & Fixing the same in position after cutting of brick work as required fixing the grills with concrete and making the suface good after fixing of MS grills

Supply of all materials for fabrication of MS windows with doube openble leafs made out of iron member and iron sheets of required specifications as directed and fixing the same to required place as directed including executing all items of works for fixing the same and completing the work as per direction of engineer-in-charge .

Supply and fixing of MS wiremesh with adequate MS member for fixing and fixing the same to required place as directed including executing all items of works for fixing the same and completing the work as per direction of engineer-in-charge .

Cement wash including watering with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge.

Painting wall with two coats of cement paint with approved shade over a coat of cement wash including watering with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge.

Painting of primer coats on new surfaces including cost of paint and T&P and cost of all other materials such as scafolding, ropes etc and completing the work as per direction of engineer in charge

Wall painting 2 coats with Weathercoat paint of approved shade on new work to give an even shade including cost of paint and T&P and cost of all other materials such as scafolding, ropes etc and completing the work as per direction of engineer in charge

Supply and fixing of Colour Coated Profile sheet 0.50 TCT in roof incuding fixisng of ridges and windties excluding cost wind-ties but including the cost of J hooks with cost, conveyance, taxes & royalties of all material and cost of all labour T&P required for the work etc., complete as directed by Engineer in charge

Supply of all materials for fabrication of Rolling Shutters made out of iron member and iron sheets of required specifications as directed and fixing the same to required place as directed including executing all items of works for fixing the same and completing the work as per direction of engineer-in-charge .

Supply of all material and labour for the work Centring and shuttering for RCC Works and finishing the work in all respect as per direction of engineer-in-charge

Column footing

Column

Plinth beam

Lintel

In slant of Gabble wall

Painting of two coats with approved quality eanamel paint (Asian?Brger or nay other reputed make) over iron work including cost of scafolding etc and completing the work in all respect as per direction of engineer in charge

CC (1:2:4) in flooring using 12mm size hard crusher broken granite chips including hoisting, lowering, laying concrete, providing and watering with cost, conveyance, taxes & royalties of all material and cost of all labour T & P required for the work etc., complete as directed by Engineer in charge.

Supply of materials and executing the work of laying of wiremesh of sieve size 25*32 mm made out of 1.5 mm galvanised wire before floor concrete, fixing the same to floor rigidly to recieve floor concrete properly including cost of all labour, material for hoisting and tying and completing the work in all respect

Collection of morrum for filling, and stacking them at site for cinvinience in measureing in uniform sizes, including cost of materials labour etc hoisting and lowering if any and completing the work in all respect as per direction of engineer -in- charge,

Conveying from stacks and laying of morrum subbase and compacting with PRR in cluding watering including cost of material, labour and all other charges and completing the work in all respect as per direction of enginner in charge

Labour for drilling a perfectly vertical bore hole of specified depth below ground level through condition and in solidation rock with condition drilling as required to soil the side condition as per direction of engineer in-charge including supply of rig with asscesries T&P and consunable etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S pipes for basing fitted with socket and with or without well screen as per the necessity for soft medium hard and boulder formation G.I/P.V.C/M.S casing pipe if required to prevent collapse of over borden is to be provided by the contractor including lowering and with drawing after complited of the tube well in over borden portion including packing of gravel supplied by the contractor for 400 dia bore only

150 MM DIA BORE WELL

100 MM DIA BORE WELL

Cost of PVC CS Pipe of reputed make with IS: 12818/92 specification and manufacturer neme should be prominently marked with test of CIPET on the body of the pipe clearly and indelible marked in ink or stenciled to IS: 12818/ 92 to the satisfaction of Engineer-in-charge

0 mtr to 20 mtr 150 mm dia pipe

21 mts to 80 mts 100 mm dia pipe

Supply and installation of following materials and completing the work in all respect as per direction of engineer in charge

10 sqmm submersible cable

Earthing as per IE Rules

Cable Jointing kit

Engineering Rope

Tapered Coupling with short piece

Pump holding clamp

Bore Cover

HDPE Pipe for Connecting submerible motore to supply oint over ground

Fullway Valve

Water Tank 2000 Ltrs

Water Pump with starter