REPAIR/ REPLACEMENT OF WOODEN FURNITURE, COMPUTER TABLE, BOOK CASE, OFFICER TABLE, CLERK TABLE, WOODEN LOCKERS AND OTHER CONNECTED WOODEN FURNITURE WORKS FOR OFFICE FURNITURE AT AF STN MANAURI

Amount

Chair CB with Arms (Drg No 4124) M&L for replacement of damaged / broken parts of chair CB Arms with first class teak wood and readjusting as per Drg complete chair as specified and shown on Drg as directed by Engineer-in-Charge for the following :- (i) Front legs

(ii) Rear legs

(iii) Hand Rest

(iv) Front & Back Rails

(v) Bottom Stiffners

Re-Canning of Chair CB with arms canned with 2mm wide half round white plastic cane and border canning with 4mm wide plastic cane complete as per specification including taking out old cane complete as specified and shown on drawing as directed by Engineer–in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Chair CB with arms including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Chair Visitor (V-020, C29) Taking down unserviceable tapestry cloth from seat & back of chair revolving and S&F new tapestry cloth with approved quality & shade rate not less than Rs. 550/- to 650/- per running metre and including with supply of foam cushion 50 mm thick and plywood 8mm thick etc. complete all as per existing trade pattern and directed by Engineer-in-charge.

Locker Bed Side Wooden (FD 54(M), 222) Taking out unserviceable back ply wood from locker bed side wooden and Supply & Fix new back made of 6mm thick ply wood commercial BWR grade complete as shown on drawing & as directed by Engineer-in-Charge.

Taking out unserviceable Shelves from locker bed side wooden and S&F new Shelves made of 18 mm thick block board commercial Exterior grade BWR complete as shown on drawing & as directed by Engineer-in-Charge.

S&F Chromium plated piano hinge 19mm flap width and 780 mm long for door of locker bed side with mild steel screw of appropriate shape and size complete as shown on drawing & as directed by Engineer-in-Charge.

Taking out Unserveceable top/ bottom from locker bed side wooden and S&F new top/ bottom made of 18mm thick block board commercial one side teak face Exterior grade, complete as shown on drawing & as directed by Engineer-in-Charge.

Taking out Unserveceable door Shutter from locker bed side wooden and S&F new Shutter made of 18mm thick block board commercial Exterior grade BWR one side teak face & other white including 100 mm hasp & staple one number 100 mm aluminium handle complete as shown on drawing & as directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the locker bed side wooden including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Table Office Clerk Wooden Taking out Unserveceable table top from Table office clerk and Supply & fixed new table top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge.

Taking out Unserveceable/ damaged legs from table office clerk and Supply & Fixed new legs of table office clerk made of seasoned Shisham wood matching with the existing shape & sizes including PVC or rubber shoe at the bottom of leg to match the existing complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged front or back rails from table office clerk and Supply & Fixed new rails of table office clerk made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged side rails from table office clerk and Supply & Fixed new side rails of table office clerk made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged center stiffener from table office clerk and Supply & Fixed new center stiffener of table office clerk made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged side stiffener from table office clerk and Supply & Fixed new side stiffener of table office clerk made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out unserveceable/ damaged drawers from Table office clerk and Supply & Fixed new table drawers made with 12mm thick seasoned sheasham wood except bottom & bottom of drawers shall be of 6mm thick ply wood commercial type BWR grade Including PVC or wooden Knob complete as shown on drg & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Table office clerk including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Teapoy wooden (FD – 232, 278 AND 34) Taking out Unserveceable top from Teapoy wooden and Supply & Fixed new top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge

Taking out Unserveceable leg from Teapoy wooden and S&F new leg made of seasoned Shisham second class wood including rubber shoe with screws at the bottom of leg matching with the existing shape & size, complete all as specified & directed by Engineer-in-Charge.

Taking out Unserveceable front/back rails from Teapoy wooden and S&F new front/back rails made of seasoned Shisham second class wood matching with existing shape & size complete all as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Teapoy wooden including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

HAT STAND WITH MIRROR FD-233 Supply and fixing with replacement of old hat stand board with new block board commercial of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the frame complete with Hi-gloss French polish to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in-Charge.

Supply and fixing with replacement of old pegs with new pegs of Aluminium anodized and replacement of old mirror with new mirror as per existing size of make Saint Gobain/ Triveni Float Glass/ Atul/ Swastik/Golden fish/ Modi as shown on drg as existing size as per specified directed by Engineer-in-Charge.

TABLE 3'X2' WITHOUT DRAWER FD- 284 Removing of old unserviceable top from Table 3' x 2' w/o drawer wooden and supply and fixing new top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge.

Replacement of old unserviceable leg from existing Table 3' x2' w/o drawer wooden and supply and dixing the same size new leg made out of Ist class hard wood shisham to Table 3' x2' w/o drawer wooden duly french polished all as shown drg and as directed by Engineer-In -Charge.

Taking out Unserveceable/ damaged front or back Long rails from table 3' x 2' w/o drawer and Supply & Fixed new rails made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Supply of short rail for table 3' x 2' W/o drawer, taking out Unserveceable/ damaged short rail from table 3' x 2' w/o drawer and Supply & Fixed new rails made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Table 3' x 2' w/o drawer wooden including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Table writing [FD-249,275 & 33] Taking out Unserveceabletabke top from Table writing and Supply & fixed new table top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge.

Taking out Unserveceable/ damaged legs from table writing and Supply & Fixed new leg made of seasoned Shisham wood matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged front or back rails from table writing and Supply & Fixed new rails made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out damaged centre stiffener from table writing and Supply & Fixed new centre stiffeners made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged Shutter from table writing and Supply & Fixed new Shutter made of 18 mm thick Pre-laminated particle board Exterior BWR grade one side teak face of Make: Novapan/ Kit Ply sides covered with 4mm thick teak wooden or PVC beading all around the shutter including piano type hinges, 40 mm dia PVC knob & 6 lever steel lock with duplicate key of godrej patteren best quality complete as shown in drg & as directed by Engineer-in-Charge.

Taking out unserveceable/ damaged back plywood from box of table writing and Supply & Fixed new back made with 6mm thick plywood commercial Exterior grade BWR Make: Century/ Kit ply or Sudarshan complete as Shown on drg & directed by Engineer-in-Charge.

Taking out unserveceable/ damaged drawers from Table writing and Supply & Fixed new drawers made with 12mm thick seasoned sheasham wood except bottom & bottomg of drawers shall be of 6mm thick ply wood commercial type BWR grade including PVC or wooden Knob complete as shown on drg & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Table writing including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Table 900x600x760mm with/without drawer Taking out Unserveceable top from Table 900x600 mm and Supply & fixed new table top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge

Taking out Unserveceable/ damaged legs from table and Supply & Fixed new legs made of seasoned Shisham wood matching with the existing shape & sizes including PVC or rubber shoe at the bottom of leg to match the existing complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged front or back rails from table 900x600mm and Supply & Fixed new rails made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged side rails from table 900x600mm and Supply & Fixed new side rails made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out damaged centre stiffener from table 900x600mm and Supply & Fixed new centre stiffeners made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out damaged side stiffener from table 900x600mm and Supply & Fixed new side stiffeners made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out unserveceable/ damaged drawers from Table 900x600mm and Supply & Fixed new drawers made with 12mm thick seasoned sheasham wood except bottom & bottomg of drawers shall be of 6mm thick ply wood commercial type BWR grade including PVC or wooden Knob complete as shown on drg & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the table 900x600mm including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Table Computer ICF -15 (FD/E6/MAP/ 03 ) Supply & fixing in replacement of old unserviceable table top & Bottom made out of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification) with 4mm thick teak wood edging all round the top.

(b) Removing existing U/S telescopic channel ,Supply & fixing in replacement of old unserviceable computer table telescopic channel for Key board as per existing size 20/25 mm as shown on drawing and as directed.

(c) Removing existing U/S Supply & fixing in replacement of old unserviceable computer table telescopic channel for drawer as per existing size 20/25 mm as shown on drawing and as directed.

Supply & fixing in replacement of old unserviceable table Side(left & Right) made out of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification) with 4mm thick teak wood edging all round the top.

SIDE BOARD FD-241,FD-371. Taking out existing old unserviceable top and bottom of side board and providing new top and bottom made out of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top and bottom complete as shown in drg & directed by Engineer-In-Charge.

Taking out u/s ply wood from side board back side and providing new 6mm thick ply wood commercial BWR Gde I including polishing complete.

Removing existing U/S shutter Supply and fixing new shutter double leaf made out of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side with continuous hinges cromium plated (Piono) and polishing complete 6mm thick teak wood edging shall be provided 40mm plastic knob superior quality in each shutter shall be provided.

Taking out old unserviceable drawer from side board and providing new drawers made out of 1st class hard wood (Teak) and bottom of 6mm thick plywood commercial BWR Gde I including replacement of 40mm dia plastic knob superior quality in each drawer and polishing complete as directed by Engr in charge .

Table centre (FD- 174, 235 AND 274) Taking out Unserveceable top from table center and Supply & Fixed new top made of pre-laminated particle board one side teak face Exterior grade BWR 18mm thick duly covered with 4mm thick teak wood beading with polishing all around the table top complete all as shown in drg & directed by Engineer-in-Charge.

Taking out Unserveceable leg from table center and S&F new leg made of seasoned Shisham second class wood including rubber shoe at the bottom of leg matching with the existing shape & size complete all as specified & directed by Engineer-in-Charge.

Taking out Unserveceable long rail from table center and S&F new front/ back rail made of seasoned Shisham second class wood matching with existing shape & size complete all as specified & directed by Engineer-in-Charge.

Taking out Unserveceable side rails from table center and S&F new side rails made of seasoned Shisham second class wood matching with the existing shape & size complete as directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to table center including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

BIN SOILED LINEN FD-244 Taking out existing old unserviceable top and bottom of bin soiled linen multipurpose and providing new top and bottom made out of 18 mm thick commercial block board covered with 1.00mm thick decorative laminated sheet with fevicol including 6mm thick teak wood edging all around the top.

Taking out u/s ply wood from bin soiled linen multipurpose back side and providing new 12 mm plywood including 4 mm teak wood ediging duly polishing complete.

Taking out old unserviceable drawer from bin soiled linen multipurpose and providing new drawers made out of 18 mm ply wood commercial board including replacement of 40mm dia plastic knob superior quality in each drawer and polishing complete as directed by Engr in charge .

Table Conference Make Methodex Model Riva CF 2400 & Riva HRCT 1840 Taking out Unserveceable table top from Table conference and Supply & fixed new table top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge.

Taking out Unserveceable/ damaged legs from Table conference and Supply & Fixed new legs made of seasoned Shisham wood matching with the existing shape & sizes including PVC or rubber shoe at the bottom of leg to match the existing complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged front or back rails from Table conferenceand Supply & Fixed new rails made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable/ damaged side rails from Table conference and Supply & Fixed new side rails made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out damaged centre stiffener from Table conference and Supply & Fixed new centre stiffeners made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out damaged side stiffener fromTable conference and Supply & Fixed new side stiffeners made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out unserveceable/ damaged drawers from Table conference and Supply & Fixed new drawers made with 12mm thick seasoned sheasham wood except bottom & bottomg of drawers shall be of 6mm thick ply wood commercial type BWR grade including PVC or wooden Knob complete as shown on drg & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the table 900x600mm including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Table peg (FD – 236, 277 AND 25) Taking out Unserveceable top from table peg and Supply & Fixed new top made of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge.

Taking out Unserveceable leg from table peg and S&F new leg made of seasoned Shisham second class wood including rubber shoe at the bottom of legs fixed with steel screws matching with the existing shape & size complete all as specified & directed by Engineer-in-Charge.

Taking out Unserveceable front/ back rails from table peg and Supply & Fixed new front/ back rails made of seasoned Shisham second class wood matching with existing shape & size, complete all as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Table Peg including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Sofa Set 5 Seater Taking out unserveceable damaged tapestry cloth from sofa set 5 seater and S&F new tapestry cloth of approved quality & colour including lining cloth with and including polishing with Hi-gloss French polish on wooden parts complete as shown on drawing & as directed by Engineer-in-Charge.

Taking out unserviceable legs of sofa set five seater and providing new legs made out of Ist class hard wood (Teak) Designed duly polished.

Supply of 100 mm thick 32 density Cushion with tapestry cloth detachable type using one side suitable zip as approved covered all around with white marking cloth (costing not less than Rs 100 per running metre as approved by GE) duly stitched in each cushion. Cushion shall be covered with approved standard tapestry cloth rate not less than Rs. 550/- to 650/- per running metre and zip of suitable length on any one side of standard quality to facilate change of cover and as approved by Engineer-in-Charge. (Make : Cushions- Sleepwell or Kurlon.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

Bharat Trading Company

Yash enterprises