Z.O.II.C.No.E1/669924/2026

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Removing of existing Facia and supplying new facia sign with Digitally Printed Retroreflective Single Arrow board of size 1595mm x 900mm made of Type XI grade cube corner micro prismatic grade sheeting confirming to IRC 67-2012 as per ASTMD-4956-19 Specifications, Digitally Printed using Latex Printer for Traffic Colour logos/text and laminated with UV Resistant clear electro-cut film and applied to properly prepared sign substrate made of 4mm thick Aluminum Composite Material (ACM) with 0.25mm aluminium skin thick on both sides and the item shall include removal of existing facia without damaging the structure/back support frame cost of materials, loading, unloading, lead, lift, transportation etc, complete as per approved template. The signs shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufactured and supplied by the reflective sheeting manufacturer .Digitally printed traffic colour (red, blue, green, yellow, orange and brown) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflection established for its colour and type of sheeting as given in Table 6.9 of IRC 67-2012.The coefficient of retro reflection after the stipulated warranty period shall be minimum 80 percent of the initial value of the printed sign (initial value shall be minimum 70% of the values given in table 6.9 of IRC 67-2012). Match component system warranty for the components like retro-reflective sheeting, overlay films and digital inks shall be provided by the manufacturer The Retro reflective sheeting shall be covered under 10 years warranty issued for field performance and certified copy of completed three years outdoor exposure report shall be obtained by the engineer-in-charge. The warranty shall be inclusive of digitally printed logos/text/legends and their bonding to the retro-reflective sheeting (as per MoRT&H Specification No.801). The latex printer used for digital printing should be used with Inks of low VOC emission and should have Greenguard, eco logo certificate as per UL 2801 Standards. The warranty & Test certificates shall be obtained from the retro-reflective sheeting manufacturer by the contractor and shall be submitted to engineerin- charge (The existing old facia board to be handed over to the ward).

Danger Board as required by the Electrical Authorities