PROPOSED RESTORATION, CONSERVATION And DEVELOPMENT WORK FOR KUSHAVARTH KUND TRIMBAKESHWAR, NASHIK (PHASE III)

Providing and fixing Jute Kantan (Tarat) screen to the scaffold-ing for external guniting as directed including removing the same after the work is over etc. complete.

Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Removing and lowering the roof truss carefully without damaging the members and stacking as and where directed in the compound including scaffolding etc. complete.

Removing R.S. girders of any size and span lowering the same and stacking neatly wherever directed in the compound scaffolding etc. complete.

Removing purlins from roof including stacking as directed with all leads , lifts etc. complete.

Removing rafters from roof including the materials as directed with all leads , lifts etc. complete.

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc.

Removing cement tiles, or marble or polished shahabad floor or any other type of flooring & pavment or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete

Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.

Removing earthen, stoneware pipe and stacking them as directed with all leads, lifts etc. complete.

Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete.

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m). By Manual Means

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.

Providing and laying Rough Shahabad Stone Flooring 50mm to 60mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc. complete.

Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in external work of plinth including bailing out water manually, striking joints inside and watering etc.complete.

Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding etc. complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and laying machine cut machine Polished Basalt stone flooring 75mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete..

Providing and fixing in required position skirting or dado of Leather Finish Kadappa stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

Providing and laying Leather Finish Kadappa stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and fixing Basalt Stone Paving, Second Sort in cement mortar 1:6, with size of stone 45 cm. wide x 15 cm. thick with varying lenghts ranging from 45cm to 100cm, or as per original size and pattern found on site or as per detailed specifications and drawings or as directed, including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the cement mortar in miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing and fixing machine cut stone surface drain covers of 50 - 75mm thick basalt stone slabs of required size and pattern as shown in the drawings or as directed by the Architect or Engineer in Charge. Slats of necessary design and size to be cut in the stone slabs to allow flowing of water through the same, as directed by the Architect. Item to include providing necessary notches to allow interlocking and fixing of the stone surface drain covers including necessary laying, fixing, cleaning etc. complete

Providing and fixing country teak wood common rafters, purlins and purlin cleats, hip rafters, jack rafters, ridges, wall plates, post plates and posts for roofing etc. including scaffolding, if necessary, all iron work and one coat of primer etc. complete. It is mandatory to use well-seasoned first-quality Indian Teak Wood from the Forest Department’s FDCML

Providing and fixing Indian teak wood planking 25 mm thick for flooring/roof plained on both sides, tongued and grooved including scaffolding, if necessary, and one coat of primer etc. complete. It is mandatory to use well-seasoned first-quality Indian Teak Wood from the Forest Department’s FDCML

Providing and applying one coat of bitumen to roof (without cloth) including scaffolding etc. complete as directed.

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.).

Providing and fixing Mangalore tiled roofing with class 'AA' tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of 50mm x 25mm over the slopping battens, all iron work and coal tarring the battens etc. complete (Excluding ridge and hip tiles).

Providing and fixing Indian Teak wood eaves boards 15cm wide and 25mm thick plain decorative type including scaffolding and painting with two coats etc. complete. It is mandatory to use well-seasoned first-quality Indian Teak Wood from the Forest Department’s FDCML

Galvanised iron sheet 0.8 mm (22 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth up to 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3 mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed.

Providing and fixing ISI 1729/2002 grade 100 mm dia Cast Iron Rain Water Pipes With lugs including plug bend necessary fittings such as bends, tees, single junction, double junction, slotted vent, offsets on wall or into the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means of galvanised Mild Steel bracket of 30 x 5 mm plate and 8 mm square rod with Galvanised Iron clamp with washer as per design, drawing and as directed to keep pipe 50 mm away from wall including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of white oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in-Charge.

Providing and fixing Teak Wood Panelled Door First Class (1.20 m. x 2.10 m.) with frame 100 mm. x 125 mm section and fully panelled shutters double leaf as per detailed specifications and drawings or as directed including the best quality and well-seasoned Moulmein teak, to be properly framed and mortised together, the head and stills being provided with horns 15 cm long, all parts set in masonry to be well coated with boiling coal tar, the styles, top, bottom, lock and frieze rails 38 mm (1½″) thick with fitted moulding or as specified, the panels 32 mm (1¼″) thick to be raised, feather-tongued in to styles and rails with beaded edges on both sides, each leaf to be hung with 3 brass butt hinges 125 mm. with brass screws, furnished with pair of aldrops 16mm. diameter & 300 mm. length, pair of patent handles 150 mm., pair of tower bolts 10 mm. dia. & 250 mm. length, tower bolt 10 mm. dia. & 200 mm. length, and pair of hooks & eyes 200 mm. all of brass etc. complete. It is mandatory to use well-seasoned first-quality Indian Teak Wood from the Forest Department’s FDCML

Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to surfacesspecifird below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. For WoodWork

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60mm and sill of 75mm x 25mm and newel posts for staircases, balconies, etc. including fabricating, fixtures, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colour and polishing the sill, handrail, and the newel post with french polish

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete

Providing and constructing Basalt Stone Signage pedestal 1.2 m wide and 1m high of design and type as shown in the drawing or as directed by the Architect. 150mm thick M20 PCC bed to be constructed at upto 300mm depth from paving finish level. The stone signage to be embedded in the PCC bed with necessary anchoring, the front stone slab to be supported by two vertical stone supports behind the signage slab, which also should be embedded in the PCC bed. Front signage slab to be engraved with necessary monument inspired design details as shown in the drawing. Signage plaque to be made in Corten Steel or SS plate of necessary finish including necessary screen printing / etching of the signages and the signage plate to be fixed on the stone surface using screws or dowels as required and shown in the drawing or directed by the Architect. Item to include necessary finishing of stone surfaces, sampling of signage plaques, painting of signage, necessary tools, hardware etc. complete

Providing and constructing Basalt Stone directional signage 2.1m x 0.9m, constructed using MS framework with basalt stone clading as shown in drawings or as directed by the Architect. Framework to be fabricated using 50mm x 50mm MS Angels as shown with 40mm stone slabs fixed using necessary anchoring methods and adhesives. 150mm thick M20 PCC bed to be constructed at upto 300mm depth from paving finish level. The framework to be anchored in the PCC bed with necessary anchoring. Front signage slab to be engraved with necessary monument inspired design details as shown in the drawing. SS cut letters of required finish and sizes to be stuck on the stone surfaces using adhesives and pins. Item to include necessary finishing of stone surfaces, sampling of signage plaques, painting of signage, necessary tools, hardware etc. complete

Providing and Installing 2.7m high Traditional Heritage type M.S. Pole Signages using 10cm dia. MS circular pipe with decorative finial on top, of design and type as shown in the drawing or as directed by the Architect. Item to include necessary P.C.C. works for foundation for the pole. Pole to be anchored into decorative circular 45cm dia. and 30cm high basalt stone base, with necessary carvings and details as shown in the drawings and 15cm of base to be embedded below ground on the PCC foundation bed. .Directional Signages using Corten Steel/ MS plates around 15cm - 20cm high and 45cm - 60cm wide to be fixed to the pole with necessary anchoring methods and signage details to be screenprinted/ etched on the same as directed by the Architect. Item to include painting the pole with epoxy paint of required type and design as directed by the Architect including all necessary tools, hardware, sampling, etc. required to complete the item in all respects

Providing and Installing 1.5m x 0.45m Basalt Stone Benches of design and type as shown in the drawing or as directed by the Architect. The stone bench to be made using machine cut 4" thick basalt stone supported on 2 nos carved 4" thick vertical supports fixed using necessary dowel details. The bench supports to be embedded in 150mm thick M20 PCC bed constructed 150mm below the finished floor level. Item to include chamfering/ rounding of edges, dressing of stone surfaces, necessary tools, hardware, finishing etc. complete

Providing and Installing Basalt stone Litter Bins of design and type as shown in the drawing or as directed by the Architect. Item to include necessary P.C.C. works for foundation. Item to include necessary screen printing / etching of the signages to be fixed on the litter bins as directed by the Architect including all necessary tools, hardware, sampling, etc. required to complete the item in all respects

Disposing off/ conveying the dismantled materials of stone masonry/ brick masonry/ concrete/ debris/ excavatgted material/ soil murrum/ rubbish material or vegetation/ grass/ shrubs etc. from site to 5 Km as directed by Engineer

Please Enable Macros to View BoQ information