CONSTR OF VOCATIONAL LAB AT KV TIRUMALAGIRI, ADDN /ALTN OF TOILET CUM WASHROOM IN THE EXISTING QPP HALL OF ARO AND REPLACEMENT OF CEMENT SHEETS OF ROOF WITH GALVANIZED SHEET IN OTHER MD ACCN BLDG P 40 OF UNIT UNDER AGE B/R I/II OF GE (S) SECBAD

Amount

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and as directed

M & L Excavating over areas, n exc 1.5 m deep and getting out Hard/Dense Soil complete all as specified and as directed

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling complete all as specified and as directed

M&L for Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for fair finished surfaces complete all as specified and as directed

M & L for Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed

Use and waste of form work to sides and sofit of Beams for Fair finished surfaces complete all as specified and as directed.

Use and waste of form work to sides and sofit of Slab & Chajja etc for Fair finished surfaces complete all as specified and as directed

M & L for RCC- M - 25 Design Mix as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

M&L Reinforced cement concrete (design mix M-25 grade using 20mm graded aggregate) above top of footings including attached pilasters and buttresses complete all as specified and as directed

M & L for RCC- M -25 Design Mix as in columns, pillars, piers,posts and struts complete all as specified and as directed

M & L for RCC- M -25 Design Mix as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

M & L for RCC- M -25 Design Mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in,shelves and the like complete all as specified and as directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L Mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia. complete all as specified and as directed

Ditto, but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders and the like complete all as specified and as directed

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Removing excavated soil to a distance exc 50 m but n.exc 250 m and depositing complete all as specified and as directed

M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B-O to horizontal or vertical surface including necessary formwork complete all as specified and as directed

M&L Rendering 10mm thick on concrete surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified and as directed

M&L Rendering 5mm thick in CM 1:3 on soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like finished even and smooth without using extra cement complete all as specified and as directed

M&L 15mm thick rendering in two layers of 10mm thick backing coat in CM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately)

Supply only integral WPC (3% by wt of cement) complete all as specified and as directed

M & L For Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed

M&L preparation of newly plastered surfaces of wall and applying two coats of Oil Bound distemper over a coat of primer over a coat of internal wall care putty complete all as specified and as directed

All as item above but on Ceiling surfaces complete all as specified and as directed

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed

M&L Filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surfce complete all as specified and as directed

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 75mm thick as in sub base complete all as specified and as directed

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in 40mm thick complete all as specified and as directed.

M&L PCC 1:3:6 type C1 using 20mm graded aggregate of 75 mm thick as in Plinth Protection complete all as specified and as directed.

M & L Chequered cement concrete tiles, with grey cement and pigment 30cm x 30cm x 20mm thick set, jointed and pointed in neat cement slurrry in floors including 20mm thick screed bed in Cm 1:4 complete all as specified and as directed

M&L Light shade Vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile exc 0.42 Sqm but n exc 1.00 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

-ditto- but in skirting/dado laid over 10mm thick cement plaster in cement mortar 1:4 complete all as specified and as directed

S & F powder coated Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 12 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed

Supply and fix Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Material and Labour for PCC 1:2:4 Type B0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

S&F of factory made 40 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a), supplied and fitted to chowkats complete all as specified and as directed

Providing & fixing of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap.The shutter corner bracket should be fixed in such a way that PVC lip should cover the corner gap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work. complete all as specified and as directed Make: Elixir 2000 Series Windows or equivalent

Supply only 5.0mm thick sheet glass, ordinary quality in squares n exc 0.50 sq.m in each pane complete all as specified and as directed

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and as directed

S&F 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hingeplate and fixed with screws complete all as specified and directed

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed

S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed

S&F 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings, framework of water tanks and similar work conforming to complete all as specified and as directed Fe.290.Gde-E-165

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete all as specified and as directed (Note : Colour of granite shall be as approved

S&F of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors complete all as specified and as directed

S & F 1000 litres capacity Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted in position complete all as specified and as directed in SSR Part I

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed.

S&F 100 mm CI Floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor complete all as specified and as directed.

S&F 75mm dia outlet PVC (SWR) floor trap,plain with grating incl joining with solvent cement complete all as specified and as directed

S&F PVC (SWR) Gully 125/110 mm,seting and incl joining with solvent cement complete all as specified and as directed

S&F 75mm dia PVC (SWR) bend with oval access door complete all as specified and as directed

S&F PVC (SWR) cowls 75mm dia complete all as specified and as directed

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for 40mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in padding (level course) on roof incl finishing the cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed.

M & L for water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compouund @ 3% by weitht of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane. (v) Applying two coats of Aluminium paint on water proofing treatment Note :- Water proofing compound shall be measured and paid separately.

M&L for Salt Glazed Stoneware pipes grade 'A',200mm bore,laid in trenches and jointed complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) for bed to drain pipe 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed

Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering complete all as specified and directed.

S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre painted gal valume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets. Complete all as specified and as directed.

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out og GI flat 40 x 3 size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as sepcified and directed

M&L for Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as sepcified and directed

Dismantling framed wooden purlin/Rafter work of any description sectional area exc 40 Sqcm not other wise provided for, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for. complete all as specified and directed.

S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A.

M&L preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as sepcified and directed

Demolation of Brick or stone masonry built in cement mortar complete all as specified and directed..

M & L for brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc incl removing of debrie all as specified and as directed.

M/L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finish the surface even and smooth with out using extra cement complete all as specified and as directed.

M&L for two coats of cement based paint on newly plastered surfaces of walls including one coat cement primer and preparation complete all as specified and as directed.

M&L Preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on walls. complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed.

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as below floor finish complete all as specified.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing.

S&F in vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed. Note :- Cat No - CNS-WHT-551SNPP184LZ of JAGUAR or equivalant make of CERA or HINDWARE.

Supply & fixing vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and as directed. Note :- WHB Cat No - CNS-WHT-801 of JAGUAR or equivalant make of CERA or HINDWARE. Note :- Padestal Cat No - CNS-WHT-301 of JAGUAR or equivalant make of CERA or HINDWARE.

S&F 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and directed.

Supply and fix bathroom mirror cabinet PVC of size 400 X 500 mm fancy type complete all as specified and as directed .Make : Cat No-554 of Prayag or equivalent .

S&F CP Soap dish fixed with chromium plated brass screw complete all as specified and directed.

S&F in brass chromium plated tubular towel rail 600 mm long complete all as specified and directed. Make : Cat No-AQN-7711 of Jaquar or equivalent .

S&L in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm complete all as specified and directed.

S&F in stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) all as directed by Engr-in-Charge Make : Cat No:CON-083FTK of Jaquar or equivalent .

S&F in angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and as directed. Make : Cat No:CON-059KN of Jaquar or equivalent .

Supply and fix CP health faucet with 01 Mtr tube and hook complete all as specified and as directed. Make : Cat No:ALD-579 of Jaquar or equivalent .

Supply and fix in wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side , connecting legs & wall flanges complete all as specified and as directed. Make :Cat No: FLR-5273UPR of Jaquar or equivalent .

S&F in Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S&F in Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fix 150 X150 mm overhead shower complete all as specified and as directed. Make :Cat No:OHS-CHR-1605 of Jaquar or equivalent .

Supply and fix 15 mm bore pillar tap of cast copper alloy with capstan head , chromium plated , fancy type , screwed down high pressure with or without lettered 'Hot' or 'Cold with long screwed shanks and fly nuts , screwed for iron pipe complete all as specified and as directed Make : Cat No:CON-021KN of Jaquar or equivalent .

S&F 16 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed

S&F in repairs of CPVC pipes20 mm dya SDR 11 & plian CPVC SDR 11 fittings in wall /ceiling or laying in floors complete all as specified and directed.

S&F in Vitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint (APEX ULTIMA of Asian Paints or equivalent of Berger/Nerolac) over a coat of primer complete all as specified and as directed.

M&L Preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying two coat of cement based paint for external surfaces including preparation old surfaces including filiing all cracks with approved crack filler complete all as specified and directed.

M&L complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed.

M&L Preparation of plastered or unplastered old decorated surfaces of ceiling including filling of cracks with approved crack filler and applying one coat of white wash complete all as specified and directed.

S&F in repair for pully operated clothes drying system pully it 8 feet (with 4 pipes) consisting of four anodoized aluminium pipes each of outer dia 22mm and inner dia 19.8mm and pully made up of Derlin with rope guide mounted on channel pair of length 24" (distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with selftapping screws provided with kit. Rope will be polyster braided undyed of 3.5+ 0.5mm dia. complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each including steel windows etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but n exc 4.00 sqm each incl steel windows etc complete all as specified and as directed.

S&F powder coated anodised aluminium frame for three track sliding windows, fixed/top hung frame for ventilators with one or more rebates including jointing cleats for fixing etc. including making good distrubed portion of wall complete all as specified and as directed.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. (Note: Glass pan and wire mesh shall be measured and paid seperately).

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe including connections to flushing pipe and outgoing pipes fixed in repairs including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), PVC connections 15mm size with PTMT nuts of length 450mm and 32mm dia flush pipe for urinal complete all as specified and as directed.

Mechanically pumping out sewage water from Septic tanks/sump well where required and as directed with taking precautionary measurers including tools & plants as required and removing to place out side MOD land from the site complete(working in foul condition) complete all as specified and as directed.

Removal of filter media including sludge as deposited by excavating in foul position from filter bed etc any depth or width complete all as specified and as directed.

Cleaning of shurbs /bushes arround the septic tank, filter bed, manholes and along the sewage line etc complete all as specified and as directed.

Supply and loose filling with broken stone aggregate of gauge 40 to 80mm as filter media in filter beds, soak pits etc complete all as specified and as directed.

All as per srl item No. 135 above but 20mm gauge broken stone aggregate complete all as specified and as directed.

Demolition and breaking up drain pipes 150mm dia ( Salt Glazed ware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MD and complete all as specified and as directed.

M&L for Salt Glazed Stoneware pipes grade 'A',150mm bore,laid in trenches and jointed complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) for bed to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes 100mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Supply and fix in PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor all complete all as specified and as directed.

Demolition of RCC cover slab for manholes etc complete all as specified and as directed.

M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone aggregate as in cover slab for manholes etc.and set in cm 1:6 complete all as specified and as directed.

M&L for walling of squared rubble masonary (Secunderabad type) , recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) complete all as specified and as directed.

M&L Cement concrete 100mm thick type D 2 (1:2:4) (using 40mm graded stone aggregate) as in flooring complete all as specified and as directed.

M & L Plain cement concrete type-B1(1:2:4) (using 20mm graded stone aggregate ) as in benching coping and haunching etc incl necessary form work.complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for sand cushion laying and fixing for interlocking tiles complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment. complete all as specified and directed.

Material and labour for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc complete all as specified for the following:- (a) One light / fan point controlled by one switch.

(b) All as per SI item No 152 here-in-above, but for one exhaust fan point controlled by one switch complete all as specified and as directed

(c) One three pin switch socket 6 Amps outlet on same board complete all as specified and as directed

(d) One three pin switch socket 6 Amps outlet on independent board complete all as specified and as directed

All as per item No 152 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed

Supply and fix Modular switch 1 way 6A , 1-module complete all as specified and directed

Supply and fix ceiling rose three terninal surface bakelite type AC 50Hz 230 volts of size 65x50 mm complete all as specified and directed

Supply and fix Modular switch 1 way 16A with indicator, 1-module complete all as specified and directed

Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and directed

Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module complete all as specified and directed

S & Fix ceiling fan regulator suitable for BLDC fans step socket type AC 240 volt suitable for 1200 mm sweep complete all as specified and directed

S & F 20 W surface / wall mounted LED batten input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers including making suitable hole for fixing of exhaust fan complete all as specified and directed

S&F sheet metal enclosure TPN DBs with 200 Amps rated bus bar of 4 way 415 volts with blank plate complete with double door,complete all as specified and directed

S&F of MCB DB SPN 8Way double door 240Volt 50Hz with complete accessories complete all as specified and directed

S&F of MCB SP 6 to 32 Amps 'C' series complete all specified and directed

S&F of MCB SPN 40-63 Amps 'C' series complete all specified and directed

S&F of MCB TPN 63Amps 'C' series complete all specified and directed

Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete all as specified and directed

Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F MCB SPN 40 to 63 Amps 240 volts C- type complete all as specified and as directed

S & F Sheet metal enclosure MCB DB SPN 4 way, 240 volts double door with locking system complete all as specified and as directed.

M & L for concealed Submain wiring with two single core4 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.(for TPN DB to SPN DB 4 Way)

Supply & Fix Electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep for Toilet of Md Accn complete including making suitable size hole in wall complete all as specified and as directed.

K LAKSHMAN SINGH AND CO (BID ID -3176540)

SAI RAM CONSTRUCTIONS (BID ID -3175888)