ADDN/ALTN TO OFFICER MESS AND SINGLE OFFICER ACCN AT AIR FORCE STATION HASIMARA

Amount

Demolition of Brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed. (Note : reinforcement cut as required to facilitate demolitions)

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work complete all as specified and directed

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frame,exc 1.5 Sqm but not exc 4.00 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutter of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down shutter of any description exc 2 sq. m each complete all as specified and directed.

Taking up or down GI tubing of 15mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing of 20mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing of 25mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

M&L brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

M & L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters/roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for anodised aluminium snap grid frame work for false ceiling of suitable size panel with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete as per manufacturer's instructions including fixing of nut, bolt and clamps with the help of drilling machine complete all as specified and as directed

M&L for 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing or all as per manufacturer's instructions complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:4) in two layers (10 mm thick in first layer and 5 mm thick in second layer) finished even and smooth (without using extra lime or cement) mixed with water proofing compound as per manufacturer’s instruction on top/second layer of plaster, complete all as specified and directed. (Note : WPC shall be measured & paid separately).

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even, complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 on ceiling and soffits of staircase, waist slab or concrete surface finished even and smooth without using extra cement, complete all as specified and directed.

Supply only liquid water proofing compound approved quality, complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base flooring including formwork, if required,complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in levelling course to floor finishes complete all as specified and directed.

M&L for scratch free light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6, complete all as specified and directed.

M&L for scratch free light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting, dado, riser to steps etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for joint free, coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350x250x7mm/450x350x7mm to 8mm thick in vertical surface set and jointed in neat cement slurry pointed with white or coloured cement to match over and including 10mm thick rendering in cement plaster 1:4, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in floor, cooking platforms and like complete over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 10mm thick cement plaster in cement mortar 1:4, complete all as specified and directed.

M & L for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor in alternate bays and finished the surface complete all as specified and directed.

Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

M & L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays not exc 2 Sqm each and finished the surface fair and even without using extra cement , providing joints though out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M & L for PCC (1:2:4) , type B-1 (using 20 mm graded crushed stone aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including formwork if required , complete all as specified and as directed

M & L for PCC (1:2:4) , type B-0 (using 12.5 mm graded crushed stone aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including formwork if required , complete all as specified and as directed

M&L Reinforced cement concrete M 25 (Design Mix) using 20mm graded aggregate in Chajjas and the like complete all as specified and directed. (Note : Reinforcement and form work will be measured and paid separately under relevant items)

M & L for Precast reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary formwork, moulds, etc complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately)

M & L for steel form work to chullah hoods, chajjas, troughs including edges and similar work; for flat surface (Fair finished surfaces ) complete all as specified and directed.

S & F TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S & F TMT steel bars 6 to 8 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified and as directed.

S & F rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of grade Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed.

S & F 105 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S & F 125 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S & F well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, all as per specification & drawing complete and as directed.

S & F 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 30 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified and directed in SSR Part I Section 8 clause 8.24 (a).

S & F Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as directed.

M & L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as specified and directed.

M & L for powder coated aluminium door shutters,aluminium section weighing 0.55 kg/m (minimum thickness of powder coating 50 micron)including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. powder coating of any colour complete all as specified and directed.

S&F 12mm thick toughened glass exc 0.50 sqm in each panel, matching with existing design including all accessories of glass door, complete all as specified and as directed.

M & L 'in repair' for 12 mm thick, Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M & L for rolled mild steel in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-410- W(Gde- E-250) quality- A complete all as specified and directed.

M & L mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing in aluminium section in square exc 0.5 sq. m in each pane complete all as specified and directed.

S & F for 4 mm thick, figured sheet glass, pin head type and glazing with oil putty or wooden beading in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S & F 'in repair' stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S & F 75mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type E-22 complete all as specified and directed.

S & F 100mm size, Butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.

S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section fixed, complete all as specified and directed.

S & F 100 mm long, Aluminium anodised, barrel tower bolts of extruded section fixed, complete all as specified and directed.

S & F 300 mm long, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S & F ' in repair ' aluminium (Die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete, all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

M & L for preparation of new or previously untreated steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying two coats of oil distemper emulsion (Ist quality) of approved manufacturer over a coat of primer paint, over and including 2mm thick acrylic wall care putty , after complete removal of existing treatment from walls, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil distemper emulsion(Ist quality) of approved manufacturer over a coat of priming paint over and including 2mm thick wall care putty complete all as specified and directed

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying two coats of white wash,complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer , complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of priming paint complete all as specified and directed.

Taking down/out of existing roof treatment including brick tile or terrazo tile of any thickness from RCC roof by dismantling tiles/scrapping/scrubbing/brooming, sweeping clean and washing down with water using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated :- (i) Rendering 15mm thick in CM (1:4) on existing roof surface true to level. (ii) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (iii) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.60 Kgs per Sqm reinforced with non-woven polyester fabric/matt weighing not less than 160gms per Sqm having softening point not less than 150 mm centigrade, having tensile strength of 650 N/5cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinfocred tearing strength of 180 N by torch application . Polymeric membrane shall be taken to a height of 30cm(minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing wherever it is noticed. Note :- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/IS 16532-2017.

Item No 85 Contd..... (iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Chage before incorporation in the work. (v) Necessary independent tests shall also be carried out by the Contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work (vi) The work shall be executed through authorised applicators of original manufacturer only

M & L for 40mm thick PCC ( 1:2:4) type B-0 (12.50mm graded aggregate) as in roof padding, wherever required, finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed.

M & L Cement concrete tiles of size 25cm x 25cm x 22mm thick, machine pressed, with grey cement and no pigment set, jointed and pointed in neat cement slurry on roof over APP membrance laid over and including 15mm thick cement screed bed in cement mortar 1:4 with WPC 3% by weight of cement or as per manufacturer's instructions, joint of tile shall be filled with slurry mixed with water proofing compound ,all as specified and directed. (Note : WPC shall be measured and paid separately

Dismantling of water tanks from roof /stagging etc and removing from site etc exc 250 but n.exc 500 Ltrs capacity, complete all as specified and directed.

Dismantling of water tanks from roof /stagging etc 3m and removing from site etc exc 500 but n.exc 1000 Ltrs capacity,complete all as specified and directed.

S & F 500 litres capacity rotational moulded polyethylene (HDPE) water storage tanks (Cylindrical vertical with closed top), ISI Marked, conforming to IS 12701-1989 having triple layers wall construction with manhole threaded lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes,hoisted and fixed in position complete all as specified and directed.

S & F 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks (Cylindrical vertical with closed top), ISI Marked, conforming to IS 12701-1989 having triple layers wall construction with manhole threaded lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes,hoisted and fixed in position complete all as specified and directed.

S&F ' in repair ' 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm- 42gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F 'in repair' 15mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm- 142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F ' in repair' 20mm bore dia gun-metal. Globe or gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and directed.

S&F ' in repair' 25mm bore dia gun-metal. Globe or gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and directed.

S&F ' in repair' 15mm bore dia gun-metal. Globe or gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and directed.

S&F GI tubing of 15mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing of 20mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing of 25mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors complete all as specified and directed.

Refixing 15mm old steel tubing obtained from Srl Item No 13 here in before with all connections ,i.e, tees, bend, elbow, union,sockets etc in new or old position (Walls, ceiling, floors, etc.)complete all as specified and directed. (Note : Rate shall be inclusive of all new connections/fittings required)

Refixing 15mm old steel tubing obtained from Srl Item No 14 here in before with all connections ,i.e, tees, bend, elbow, union,sockets etc in new or old position (Walls, ceiling, floors, etc.)complete all as specified and directed. (Note : Rate shall be inclusive of all new connections/fittings required)

Refixing 15mm old steel tubing obtained from Srl Item No 15 here in before with all connections ,i.e, tees, bend, elbow, union,sockets etc in new or old position (Walls, ceiling, floors, etc.)complete all as specified and directed. (Note : Rate shall be inclusive of all new connections/fittings required)

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed.

S&F ' in repairs' 15mm bore fancy type chromium plated, concealed stop valves ,cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 'in repair' 15mm bore fancy type chromium plated angular stop cock , screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 'in repairs ' for 15mm bore , fancy type chromium plated bib tap, cast copper alloy with capstan head long body and cup, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 'in repair' 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm 125gms).complete all as pecified and directed.

S & F ' in repairs ' 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F 'in repair' 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 'in repairs ' pillar taps,15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type complete all as specified and directed.

S&F 'in repair' brass chromium plated fancy type mixer, 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F ' in repairs' Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S&F 'in repairs' Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F ' in repair ' CP health faucet along with 1m long flexible tube and holding stand incl all necessary fitting complete all as specified and as directed

S&F ' in repair ' 125mm size chromium plated shower roses with arm , with or without swivel joints, any size, including fixing to steel pipe or union, complete, all as specified and as directed.

S & F 'in repairs '10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F ' in repair ' chromium plated brass soap dish , any type , fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

S&F ' in repair ' sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F ' in repair ' chromium plated brass toilet paper holder with cover plate, box type fixed to walls with chromium plated (CP) brass screws, complete all as specified and as directed.

S&F ' in repair ' sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,incl 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM (1:3) if required, complete all as specified and as directed.

S & F ' in repairs' Vitreous China wash basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F ' in repairs ' vitreous China wash down water closet pan (pedestal pattern), white, ' P ' or 'S ' trap ,including connection to outgoing drain and flushing pipe, anti syphonic pipe with and including water closet seat cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S&F ' in repair' 25 mm dia curtain rod mild steel chromium plated decorative type complete all as specified and as directed.

S&F decorative type brackets with ends/stops etc including other accessories for fixing arrangements of 25 mm dia curtain rod to wall ,complete all as specified and as directed.

S & F ' in repairs ' Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed

S & F ' in repair ' grating round 140 mm size of PTMT (Minium weight 50 gms) complete all as specified and as directed.

Taking down eaves gutters and rain water pipes(any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) ,complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floors ,complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed.

S&F 110mm bore, PVC (SWR) bends of any radious , complete all as specified and as directed.

S&F 75mm bore, PVC (SWR) bends of any radious , complete all as specified and as directed.

S&F 75mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door, complete all as specified and as directed.

S&F 110mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door, complete all as specified and as directed.

S&F Stack clamps for 110mm bore pipes out of 50 mm by 5 mm flat iron and 16mm dia each round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F Stack clamps for 75mm bore pipes out of 50 mm by 5 mm flat iron and 16mm dia each round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F ' in repairs ' cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement mortar 1:2:4 type B1 using 20mm graded aggregate complete all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for lying of cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed.

M & L for PCC ( 1:4:8 ), type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete etc, including formwork, if required, complete all as specified and as directed

M & L for PCC ( 1:3:6 ), type C-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete etc, including formwork, if required, complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material(Soils) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

Removing excavated material(Soils) to a distance exc. 250m and n exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

M & L for hardcore of gauge n exc. 63 mm broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface , complete all as specified and directed

M & L for concrete bed in cement concrete 1:4:8 type D 2 to drain pipes 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested , complete all as specified and directed

M & L for 150mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

E/M PORTION (INTERNAL ELECTRIFICATION) Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down fan any type , sealing cable end, dismantling blades and removing fan and blades deposited to MES store yard complete all as directed

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store, complete all as directed

Taking down unserviceable/BER geyser of any capacity from existing location /site and depositing MES store yard complete all as directed

M & L for point wiring for One light point / one fan point controlled by one, one way swtich complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FR-LSH cable, copper conductor multistranded passing through including PVC conduit(medium grade) concealed on wall/floor and surface type on ceiling of size not less than 20mm dia with concealed modular box suiltable for logic modular switches, sockets, etc and logic modular white plates, sourroundings of suiltable size as required at site with PVC insulaterd FRLSH unsheathed stranded copper conductorof size 1.5 sqnn as earth wire connected to common earth dolly as specified complete all as specified and directed for the following :- Note :- (i) Rate quoted shall include for cost of making concealed MS box in stone/brick wall including cutting and sinking of boxes and making good to the stone/brick walls (No extra payment will be made for the same. (ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)

All as per Srl item No. 155 here in before but for One 5 Amp 5 pin socket outlet point on same board complete.

All as per Srl item No. 155 here in before but on independent board complete.

All as per Srl item No. 155 herein before but with 4.0 Sqmm PVC copper stranded cable FRLSH type for one 15 Amp 6 pin socket outlet point including PVC cable 4.0 Sqmm FRLSH type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes complete.

All as per Srl item No. 155 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent complete.

S & F Switch modular type, single pole, one way, 10 Amp, one module, IS:3854 marked with valid CML No complete all as specified and directed.

S & F Switch modular type, single pole, one way, and 15/16 Amps, one module IS:3854 marked with valid CML No complete all as specified.

S & F socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type IS-1988 marked with valid CML No complete all as specified and directed.

S& F socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type IS-1988 marked with valid CML No complete all as specified and directed.

S & F bell push, modular type, single pole, , 10 Amp, one way, one module,IS:3854 marked with valid CML No complete all as specified and directed.

S&F modular white cover plate with mounting frame, 2 module,complete all as specified and directed.

S&F modular white cover plate with mounting frame, 3 module,complete all as specified and directed.

S&F modular white cover plate with mounting frame, 4 module,complete all as specified and directed.

S&F modular white cover plate with mounting frame, 6 module,complete all as specified and directed.

S&F modular white cover plate with mounting frame, 8 module,complete all as specified and directed.

S&F modular white blanking plate, 1 module,complete all as specified and directed.

S & F in replacement of bell, ding dong type AC, 230 volts, single phase complete all as specified and directed.

S & F copper wound ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Energy efficient, five star rated, with brushless direct current motor (BLDC) complete with mounting arrangment as per site requirement and connecting wire up to nearest ceiling rose in flexible PVC pipe complete all as specified and directed.

S & F copper wound exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete with mounting arrangment as per site requirement and connecting wire up to nearest ceiling rose in flexible PVC pipe complete all as specified and directed.

S & F exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers complete with mounting arrangment as per site requirement and connecting wire up to nearest ceiling rose in flexible PVC pipe complete all as specified and directed.

S & F fan step Regulator modular type, two module, IS:3854 marked with valid CML No complete all as specified and directed.

S&F ceiling rose of size 65 x 50 mm surface bakelite 240 Volts three terminal complete all as specified and directed.

S & F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5Mtr length complete all as specified and directed.

S & F LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5Mtr length complete all as specified and directed.

S & F LED lights fitting mirror type with high out put diffuser 2 feet, 10W, 220V, AC decorative box type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5Mtr length complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length, complete all as specified and directed.

S & F round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5Mtr length complete all as specified and directed.

S&F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, including PVC connection pipe for hot/ cold water to existing water lines,necessary fixing arrangement by using 50 X 5 mm MS plate and writing MES No and paste the instruction sheet of Do’s and DO NOT complete all as specified and as directed.

S&F electric water heater storage type steel body with copper inner tank and heating element upto 1.5/2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, including PVC connection pipe for hot/ cold water to existing water lines,necessary fixing arrangement by using 50 X 5 mm MS plate and writing MES No and paste the instruction sheet of Do’s and DO NOT complete all as specified and as directed.

S&F in repair MCCB DB TPN 4 way, IP 43 protection double door with 250 Amp copper bus bar for each phase with neutral bar, 2 earth bar and cable ties for cable management with provision for fixing of MCCB as incomer and SP/TP MCB's as outgoing complete all as specified and as directed.

S&F in repair MCB DB TPN 4 way, IP 43 protection ,double door , concealed on wall complete all as specified and as directed.

S&F in repair MCB DB SPN 12 way, IP 43 protection ,double door , concealed on wall complete all as specified and as directed.

S&F in repair MCB DB SPN 8 way, IP 43 protection ,double door , concealed on wall complete all as specified and as directed.

S&F in repair MCB DB SPN 4 way, IP 43 protection ,double door , concealed on wall complete all as specified and as directed.

S & F in repair RCCB for Earth leakage , over load and short - circuit protection 32 Amp DP 100 mA complete all as specified and directed.

S & F in repair MCB 6 to 32 Amp , 10 KA breaking capacity, B Curve, 230 Volt etc complete with connection testing and commissioning complete all as specified and as directed.

S & F in repair MCB SPN 32 Amp with 10KA breaking capacity, B curve, 230 Volt complete all as specified and as directed.

S & F in repair MCB 63 Amp , 4 pole with 10KA breaking capacity, B curve, 415 Volt complete all as specified and as directed.

S & F in repair MCCB 4 pole 63 Amp 16 KA and adjustable type, complete all as specified and as directed.

S & F power unit upto 25 Amp modular type including socket 25 Amp , 4 module concealed metal box for mounting of power unit and modular power socket 25 Amp complete all as specified and as directed.

M & L for sub main wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down of old wiring complete all as specified and directed. Note :- (i) Three runs of cables in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deemed to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

M & L for sub main wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 4.0 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 4.0 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down of old wiring complete all as specified and directed. Note :- (i) Three runs of cables in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

M & L for sub main wiring with 4 x 6.00 sqmm +1 x 6.00 sqmm earth wire single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down of old wiring complete all as specified and directed. Note :- (i) Five runs of cables in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deemed to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion, including disposal of surplus soil to a distance not exceeding 50m , complete all as specified and as directed. [Note : (a) The unit rate includes for protection pipe and earth lead upto 7.5 m. Any variation in length of earth leas and protection pipe beyond 7.5 m shall be measured and paid seperately. (b) Excavation/earthwork is deemed to be included in the quoted rate.]

S& F energy saving , environmental friendly ‘LED Flood Light 30 W, long life with SMD LED as light source with driver complete including junction box, fixing arrangment as per site requirement and connecting copper wire 3 core 2.5 sqmm in PVC flexible conduit complete all as specified and directed.

Taking down single phase electric energy meter of any type carefully by unscrewing from boards/ outlet boxes and depositing into MES store yard for safe custody and refixing the same after completion of plastering/repair work/whenever order to fix complete all as specified and directed. Note :-(i) Any plastering/finishing work involved while taking out/refixing the same is deemed to be included in the quoted rate (ii) PVC flexible conduit required within the meter boxes is deemed to be included in the quoted rates. (iii) Meter reading of electric meter shall be recorded properly before taking out and same meter box shall be refixed without any extra cost.

S&F factory made factory assembled wall mounting, high speed oscillating fans with regulator 230V single phase 450mm sweep, complete all as specified and as directed..

Taking down serviceable surface/recess mounted light fittings of any description and type and keeping in safe custody and refix the same after completion of building repair work on ceiling including necessary fixing arrangement, complete all as specified and as directed.

Taking down the split type AC indoor and outdoor unit from existing position of any height and of capacity 1.5 Ton of any make, depositing to MES store for safe custody and refix the same after completion of building repair work by fixing the indoor and outdoor unit in position as directed, including connecting with replacement of copper tubing upto 3.00 mtr length, brazing, welding including thermal sleeve insulation for suction line and discharge line including providing hard plastic tape over the thermal insulation, complete charging of refrigerator gas upto required level, filling the cavities on wall, setting of grills alignment including testing & commissioning complete all as specified and as directed.

S & F triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 20 Amps, complete all as specified and as directed.

Taking down serviceable garden/gate light fittings complete carefully with all other accessories, cable junction box and refixing the same after completion of repair work including making foundation for fixing of garden light, GI pipe etc complete all as specified and as directed.

E/M PORTION (EXTERNAL ELECTRIFICATION) Dismantling of ACSR or AAC conductors complete all as specified and as directed.

Dismantling concrete poles/struts of any size and setting aside for re-use within 50 metres complete all as specified and as directed.

Dismantling insulators any type, any size ,complete all as specified and as directed.

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m, complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for lying of cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material(Soils) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

M & L for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed. (Note :- Thickness after consolidation be measured for payment)

Supply, laying unreinforced precast concrete cable cover, class HVP type 1 with peak, size 450mm x 180mm x 40mm complete all as specified and directed.

M & L for round type cast iron cable route indicator duly painted and marked/engraved as "Cable LT 1.1 KV" fixed on MS angle of size 25mm x 25mm x 3mm thick and height 60cm , fixing the same wherever directed with necessary arrangements for fixing complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable( heavy duty ) stranded aluminium conductor 1.1KV volt grade of size 120 sqmm, 3.5 core complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable( heavy duty ) stranded aluminium conductor 1.1KV volt grade of size 16 sqmm, 4 core complete all as specified and directed.

S & F post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galvanised iron earth strip of size 32x6 mm as earthing lead as shown in Electrical Plate No 5 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm graded stone aggreate, funnel, 20mm dia GI medium grade water pipe, 40 mm dia GI medium grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation, earth work, pit cover including disposal of surplus soil to a distance not exceeding 50m, complete all as specified and as directed. [Note : (a) The unit rate includes for protection pipe and earth lead upto 7.5 m. Any variation in length of earth lead and protection pipe beyond 7.5 m shall be measured and paid seperately. (b) Excavation/earthwork is deemed to be included in the quoted rate.]

Sch 'A' Part-II (SCHEDULE OF CREDIT) Note :- Amount of Rs. 254718.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.

M/S MANODEEP CONSTRUCTION

M/S AHUJA TRADING

DEEP NIRMAN

M/S A.B. MITRA

Atish Builders LLP