PRINTED CIRCUIT BOARD CPL as per Plasser Part No. EK-805SV-00/GT (RC Sl No. 015 ) Make - PLASSER

Special Eligibility Criteria

1. 1

   OEMs or their Authorized Agent/dealers with valid authorization from OEM can also quote on behalf of OEM provided the OEM takes full responsibility for the quality of the material including warranty obligations and the inspection against Railways orders carried out at the manufacturers premises.

   Confirmation required
2. 2

   This is a PAC item of M/s PLASSER INDIA PVT LTD-FARIDABAD(121003).

   Confirmation required
3. 3

   Land Border Criterion: This tender is governed by RB L/No- 2020/RS(G)/779/2 Dated-06.08.2020. (https://indianrailways.gov.in/railwayboard/uploads/directorate/stores/downloads/circular/2020/RSG_06082020_Insertion_Rule_144.pdf)

   Confirmation required

Commercial-Compliance

1. 1

   Delivery schedule indicated in the tender schedule is tentative and may vary as per the requirement of railway at the time of finalisation of tender/release of purchase order. However, offers with large variation from tendered delivery schedule may be ignored or considered for restricted order quantity.

   Confirmation required
2. 2

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

General Instructions

1. 1

   MSE sources, for availing benefits under MSME Act, should upload valid documents maintained under MSME Act such as NSIC Certificate etc duly marking the tendered item in the certificate. Otherwise, claim for benefits under MSME Act may not be entertained. 2. MSE sources, owned by SC/ST, should upload necessary documents to get the benefits of being owned by SC/ST. Otherwise, claim for benefits may not be entertained.
2. 2

   Make in India Policy: (a) This tender complies with public procurement policy (Make in India) order 2017 revised date 19/07/2024, issued by Department of Industrial, promotion and policy, Ministry of commerce circulated vide Railway Boards letter No. 2020/RS(G)/779/2/Pt.1 (E3322671), dated: 20/08/24. (b) Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported item and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated at Para-2.4 of Instructions to Tenderers for electronic tenders invited on IREPS attached. (c) In case of procurement for value in access of Rs. 10 Crs. the Class-I local supplier/Class-II local supplier shall be required to provide a certificate from the statutory auditor or cost auditor of the company (In case of companies) or from practicing cost accountant or practicing chartered accounts (In respect of suppliers other than companies) giving the percentage of local content.
3. 3

   Firm must indicate the HSN code and GST number of their firm. Purchaser will not be responsible for any misclassification of HSN number or incorrect GST rate quoted by firm .The offer shall be evaluated based on the GST rate as quoted by firm and same will be used to determining the interse ranking. The vendor shall be responsible for quoting correct HSN code and GST rate
4. 4

   All the Bidders/ Tenderers should ensure that they are GST compliant and their quoted tax Structure / Rates are as per GST Law. In case the successful tenderer is not liable to be registered under CGST/GST/UTGST/ SGST Act, Railway shall deduct the applicable GST from his / their bills under Reverse Charge Machanisam (RCM) and deposit the same to the concerned tax authority.
5. 5

   As per Section 171 of GST Act 2017, as a remedy against anti-profiteering, INPUT TAX credit benefit if any accrued should be passed on to the Purchaser as reduction in Basic Price, or else the following certificate should accompany the bill: It is certified that no INPUT TAX credit benefit has accrued on materials invoiced/billed for, that can be passed on to Purchaser. B) Firm should submit the Invoice/Bill clearly indicating the appropriate HSN and applicable GST rate thereon duly supported with documentary evidence. C) Firm should also give a declaration that any additional Input Tax Credit benefit, if become available to supplier, the same shall be passed on to the purchaser without any undue delay.
6. 6

   MSME- benefits available under PPP for MSME will not be extended to agent/dealer.
7. 7

   FOR: Destination i.e.: SSE/TM/MLG, N.F. Railway, Pandu, Guwahati-781012
8. 8

   Mode of Dispatch: The Contractor shall have to supply the goods by Road transport only to Consignee SSE/TM/MLG, N.F. Railway, Pandu, Guwahati-781012.
9. 9

   Firm should be OEM (OEM self certificate should be provided)

1. 1

   Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.

2. 2

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.

3. 3

   Delivery Period: No deviation from the Delivery Period stipulated in the tender is permitted.